hi
i got a touch dual right here. I got it for like 1,5 year now. But the last months the phone wont connect to a computer/laptop or anything!
i tried several computers, windows xp/vista/7 installing the mobile application of windows and activesync. Also i tried a softreset and couple of hardware resets.. it still doenst work. The phone has energy from the usb connection, but the computers dont do anything...
anybody can help? or is just my usb connection on my phone broken? only the charge option does work?
greets!
nobody?
It ever happened on my nike. Try to use another usb cable and connect your device to another PC with activesync installed
i got the same problem i was going to make a post but saw this one after installing niki wwe this started to happen i cant connect to active sync no more it does not even say if a usb is connected but charges while connected can some 1 help us please i want to install normal windows instead of cooked room but cant do it if its like this
well after half a year not being able too connect my phone connects again!
very weird, i didnt change anything, not even te cable and computer...
i installed wm 6.5 cleanblack now
Related
I 'suddenly' am unable to have my JasJar connected to Activesync. I have been successfully connecting the last two weeks and did not cahange anything to the PC's set-up.
I killed my antivirus and have no firewall software running.
I have a direct USB connection to my Laptop (no usb hub).
I have tried both Activesync V4.0 and V4.1.
I have deleted all partnerships to get a fresh start.
I have also tried to delete the PPC in the PC's device manager and connect again (I did notice the PPC was listed under the network adapters only, nothing was listed under the USB section).
Nothing seems to help and I am really desperate since I can not sync anything anymore now.
Any suggestions are more than welcome !
Thansk in advance,
Paul
have you tried another PC ? at least this way you can be sure that everything is ok .
I am travelling and will not have any access to another PC before the WE.... I did try another cable but got not lucky..
It does seem to work on another PC.
Anybody any suggestion as to what else I could try to make it work again?
firewall?, thats my pain on my work lappy, i have to vpn into work and that blocks my JJ, i get connecting but no connected, all i can do is disconnect from work which then opens the activesync ports back up. check 7438 and 5679 on your firewall
After a week with AS 4.0 I suddenly found that the only way I could get it to work was to soft reset the Jas Jar while connected. I'm guessing you've already tried that though...
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Carnivor said:
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Click to expand...
Click to collapse
I have the same problem. Get a kind of "USB not recognized" when the jasjar is on/open".
I close the Jasjar after having taken the USB out of course.
Then, after a while ( You say 10 seconds) it works fine and Activesync starts the job.
I can live with it. No soft reset needed.
Very positive to me is the fact that I can also connect to a USB HUB. So no need to plu it directly in my portable.
After connection I can open my little toy. (Gush how I love this thing)
Huib
Yes I have the same problem I only synk when the jasjar is turned off. Most probably one of the reasons apart from firewall issus is office 2003. They said to me from club-imate support that we need the newest office 2003 with sp1.
Yesterday I updated my T-Mobile Wing from the stock WM6 to WM6.1 and OpenTouch 4.0. I am running Windows Vista so I have to use the Windows Mobile Device Center. My problem is the first time I tried to sync I had no issues (contacts and email/appts). Now when I try, it doesn't even connect to my device. Anyone have any suggestions on why I'm having this issue?
BLUETOOTH?
Does Your Computer Have Bluetooth, Thats What I Used To Get It Synced The First Time?
k20y2kswap said:
Does Your Computer Have Bluetooth, Thats What I Used To Get It Synced The First Time?
Click to expand...
Click to collapse
No it doesn't have bluetooth built in or anything. Like I said, I was able to get it sync'd last night via USB and now its not even connecting.
I just went and bought a bluetooth usb adapter for my lappy. i'll see if i can get it to connect/sync that way.
I can sometimes (rarely connect) but can't sync
Any other options on why I can't sync? I'm running the wing with WM6.1 and Touch Point 4.0. My OS is Vista Home Premium so I have to use Windows Mobile Device Center.
thanks.
Yes I have one option.
When you first log in to your windows profile as your desktop is loading your computer should make a small melody sound right after this connect your phone to the computer, give it a few moments you should see the small Windows mobile device center screen start up. I know it sounds weird but I had the same issues and after months of endless research I accidentally discovered this.
The bad thing is you have to restart your computer and connect on desktop loading everytime you want it to recognize your device through Windows Mobile Device Center.
Please let me knows if it works for you.
I haven't really figured out an entirely foolproof method (haven't tried BigREDD's suggestion yet), but I usually just keep plugging it in and unplugging it until it's recognized. Restart the computer with the phone already plugged in via USB. Soft-reset the phone while it's already plugged in via USB. Make sure repllog.exe is in your startup. I've never had any luck starting ActiveSync from Programs and then hitting "Sync", but maybe you will.
Help! Cant Sync No Blue Tooth Only Boot Screen
UUUUGGG! Good grief. today has been a charlie brown day. will you please help me?
must have skipped a step flashing?
the phones connected to the computer via usb and it wont sync? , no blue tooth, to make it worst its stuck on the boot screen. i think i have the correct RUU? Anyone have ideas?
since a few weeks, i've got a very strange problem with my blackstone.
when i connect the usb cable to my phone and the pc, it don't asks me anymore wether i want to connect it as a harddisk drive or do active sync. it's also impossible to do active sync by usb since this moment. i already tried everything in the blackstone USB2PC settings, like disabling fast synchronising, deactive/active the USB2PC pop-up and so on...
what i found out yesterday is the following:
because i did a hard reset, i didn't had any contacts on my phone, so i tried to active sync over bluetooth. that worked perfectly and after the synchronizing was finished, the USB connection worked again, but only for a few minutes. afterwards i had the same problem again. nothing happened when i connected the USB cable. i was able to do the same thing again: synchronize by bluetooth, connect USB cable and it worked again for a few minutes. unfortunately i wasn't able to flash hardspl during this time period. it found the phones bootloader version, but when i wanted to start the flashing process, it said that it can't estalish a connection to the phone (tricolo bottsreen has been started and progressbar was visible, but on 0%)
i also tried it on 3 different pc's with 2 different USB cables...
normaly i would say now, that my blackstone has a defect due to the fact that i did a hard reset and it's still not working, but how is it possible that it works for a few minutes after synchonizing by bluetooth?
does anyone has an idea??? i don't want to give away my lovely blackstone for warranty
btw. is there any possibility to flash a new rom without using the usb cable? even with the soft spl method i've found, you have to use the cable even if the rom itself is flashed from the sd card...
Black Stone usb device picking as "unknown device"
i am also having the same problem please help me
Maybe i'm having a similar issue:
My HD is not recognized anymore via USB Cable. I tried different computers with different Windows Versions. (7, Vista, XP)... No Connection anymore.
Bluetooth Connection works!
I did follow all suggestions... nothing works.
Could it be, that i flashed my HD too much? Is it broken now?
have you all checked your 'USB to PC' settings?
wellers said:
have you all checked your 'USB to PC' settings?
Click to expand...
Click to collapse
Hi,
I have this problem with one of my PC as well. It was working previously. I already checked 'USB to PC' settings
kkchan said:
Hi,
I have this problem with one of my PC as well. It was working previously. I already checked 'USB to PC' settings
Click to expand...
Click to collapse
Yes, checked every of the common suggestions given in this situation.
Could it be a hardware fault?
As i told, it doesn't work on any PC! Feels like Touch HD's mini USB port is dead. Strange thing ist, that it says chargin when connection the cable. But no other reaction than charging.
is there still no solution for this problem?
i already found like 20 people now with the same problem, posting in several different threads. seems like this really is a big problem of the blackstone...
I had this problem with Duttys rom afgter plugging my HD into works pc to use internet sharing.I had to do a hard reset to sort it out sorry ts not much help but its the only way i sorted it after buying 3 new leads!
Using the stock ROM 1.14, never ever flashed a ROM. However, for a few days, I have been unable to connect my Blackstone with Windows Mobile Center (OS = Windows Vista SP1), it just fails with an (unspecified) error. I can only connect my device as a disk drive, not via ActiveSync anymore. It used to work before.
I am currently investigating whether or not the recent firewall upgrade (to Norton 360 3.0) on my computer may be the root of the problem. I'll keep you informed...
EDIT: performed an uninstall of the Windows Mobile Device Center, restarted the computer, re-installed the WMDC using the HTC CD provided with my Blackstone -> voilà, it works again
EDIT2: probably my problem was not related with the ones described here above, but who knows, maybe it will help others ...
i also hv the same problem
cannot synchronize...
last week just facing the same problem as u guys.. nothing is work.. the port just able to charge only....
did watever I can... no luck...
some time when I plug in cable.. the unit prompt "this device didn't support USB headset, please remove"...
end up..
send the unit to repair.. the shop said USB chip spoil... have to replace...
get it replaced and now back to normal...
bufung said:
last week just facing the same problem as u guys.. nothing is work.. the port just able to charge only....
did watever I can... no luck...
some time when I plug in cable.. the unit prompt "this device didn't support USB headset, please remove"...
end up..
send the unit to repair.. the shop said USB chip spoil... have to replace...
get it replaced and now back to normal...
Click to expand...
Click to collapse
is the USB chip soil under warranty? or i hv to fork out my own money?
USB Dead
Same issue here.......... Can charge but can't sync. Even in the boot loader I'm not getting anything. ... as soon as I remove the USB cable it says serial. Tried changing everything
Help anyone?
My mate has this very same problem, cable charges the phone but no connection (or popup) happens.
Anyone any further with this problem ?
elab said:
My mate has this very same problem, cable charges the phone but no connection (or popup) happens.
Anyone any further with this problem ?
Click to expand...
Click to collapse
Same here.. problem just started.
Hi Guys
The problem with the USB Connector in the phone.Four Months back I got the same issue with USB, since I had warranty I sent it to HTC Service centre to repair, they send me back in four working days in working condition. If your in UK it will be return in 3 to 4 working days.
goto HTC website and find the service centre phone no.
cheers
joe.
when i connect the usb cable to my phone and the pc, it don't asks me anymore wether i want to connect it as a harddisk drive or do active sync.
Click to expand...
Click to collapse
I already have Blackstone. Maybe You already checked Settings\Connections\USB to PC location. There is "Ask me first about USB connection type...". If my understaning is good then here must be this checkbox set to checked.
Second thing for those users who cannot use syncing only : I had and antivirus program and it has personal firewall. When I turned OFF antivirus protection and the firewall protection then the Windows Modile Device Center start working without any problems with Active sync in my phone.
Dr. Morpheus said:
I already have Blackstone. Maybe You already checked Settings\Connections\USB to PC location. There is "Ask me first about USB connection type...". If my understaning is good then here must be this checkbox set to checked.
Second thing for those users who cannot use syncing only : I had and antivirus program and it has personal firewall. When I turned OFF antivirus protection and the firewall protection then the Windows Modile Device Center start working without any problems with Active sync in my phone.
Click to expand...
Click to collapse
I checked all, but these are not cases
Interesting, I did a sync last night and today, I can't do it!
But if I use the phone as a modem for Internet, my blackstone connects without problem through cable.
Wich is the mystery?
gtdor said:
I checked all, but these are not cases
Interesting, I did a sync last night and today, I can't do it!
But if I use the phone as a modem for Internet, my blackstone connects without problem through cable.
Wich is the mystery?
Click to expand...
Click to collapse
I solved the problem. It seems that the ROM version was the problem for me:
ROM: BS_Cloudy_1.9
RADIO: 1.14.25.24
Manila: 2.5.20121225.2
I solved using "Clear Storage." After reset, reverting to original settings (original settings actually were, because I put this ROM only for two days), I was able to connect to the PC and was able to flesh another ROM
I hope that this ROM is more stable.
Hi guis, I have de same problem with usb connection, I would to send my blackstone to assistance but i have to instal first the original spl!
Is possible to restore it trough memory card and non trough usb??
Tanks
i have a t-mobile mda wizard and every time i plug it in to my pc it says device not recognized but it charges and everything... i just bout a new cradle and everything but no dice on it connecting and im running windows xp... help will be appreciated
Right click the activesync button in your toolbar and open connection setting. Click connect device. It will try to connect. If it won't, the best thing is to go thru the help thing. Do you have a custom rom?
active sync do not work
Hi there, i heard some days ago (a friend who ask me for help, unloking wizard to change ROM) and his WIZARD was not able to get recognized by PC it was a bad contact between USB conectors and cable, so he sent phone to repairs and then he was able to sync and then to migrate from WM5 to WM6.1
perhaps is a connectors trouble.....
What version of Activesync are you using? If it's 4.5, you should be good to go. I have seen problems with older versions.
Also, check Activesync on your phone. Make sure you don't already have two accounts created, because that's the limit on your phone.
If not, try different USB Cables and different USB ports (or test those things on a different device with microUSB connection) before assuming the connector on the phone is bad.
as far as i know the phone is completely factory no upgrades or anything i tried to do the connect thing thru active sync where it looks for my phone still no connection and i bought a new cradle and usb cords all together and it still doesn't work...
Hi there,
I've had my HD2 for 2 weeks now and its been working perfectly. I decided to hard reset my phone and start again from scratch. However, now when I connect it to my PC it doesn't connect or recognise it at all, it charges though. I also tried it on my laptop, thinking it might be my PC but its just the same. This is really frustrating and any help would be greatly appreciated.
Goto "Start/Menu/All Settings/Connections/USB to PC" and ensure ActiveSync button is green.
If you are running Vista or Win7 you have to install Windows Mobile Device Center. http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If not the normal Active Sync will not see the phone.
Hey guys. I know this a old thread. I notice ever since I used the program here to change the radio on my htc hd2 that my computer no longer detects my phone with snyc cable even if I have Windows Mobile Center 6.1 installed an such. The programs pop up though when I look on device manager there no unknown devices or anything. In fact I don't even hear a sound of any sort that a usb device was plug into my pc same thing on my laptop. I even put back original tmobile rom on my htc hd2 no resolve. When I fflash it with Leoimg.tbh or how ever you spell it I put it in my sd card. Any ideas on how to get the old phone to work on windows 10 again? or is something mess up in the coding on official rom or on how I flash it back to stock?. I wish I had a old pc with windows vista to see if it just windows 10 or what. Just seems so odd
no reaction from phone nor pc
Hi, guys i have similar problem, but it has nothing to do with Active Sync. The device won't notice that it is connected to the pc (it won't ask (this option is ticket) if it should act as card reader, modem or Active Sync) so as pc won't show new device. Strangely, while the device is connected into an outlet charger via cable including data wires and "don't charge if connected to a pc" option is ticket in hd2, it acts as it is connected to a pc and won't charge. When it is connected to a charger with unseparable cable (which i suppose hasn't have data wires) it starts carkit menu. For me it seems like something is shorted but i'd like to hear some other suggestions before i try to disassemble it and look inside.