How can I force my device to prevent it from trying to find an internet connection through Activesync?
Scenario: I am streaming internet radio on my device, but want to remain connected to Activesync. Activesync runs on my work computer, so internet radios streams are blocked. When the device connects to Activesync, it always trys to use that internet connection instead.
I have tried removing the "At Work" network connection, I have "allow wireless communications" in the communications settings of Activesync as well as selecting "this computer is connect to: The Internet".
Nothing I seem to do works.
I want to remain connected to Activesync, but use my wireless provider's internet.
up. anyone?
to the top
Related
PROBLEM SOLVED, APPEARS TO BE A NETWORK ISSUE
New question posted in second post.
I've searched the forums and the internet extensively without any help so here I am, asking for the community's help.
I can activesync just fine (ActiveSync 4.2) and am able to connect to the internet just as well from my Wizard via WiFi however I am unable to access the internet from my Wizard via ActiveSync passthrough.
I have selected "This computer is connected to the internet" in ActiveSync and, when viewing my network connections, I see the ActiveSync connection is in working order (IP address: 169.254.2.2).
I am unable to connect to the internet as well as my LAN because I tried pulling up my router's web interface in PIE only to receive this error:
"Unable to connect due to an unknown error [some crazy error number]."
I'm unable to connect to the internet with any application (tried sending email, updating pocket weather, egress, etc).
I've also uninstalled and reinstalled ActiveSync.
I haven't always had this problem and I can only think of two things I've done in the interim: I'm at a different house thus my desktop connects to a different network and I've installed (and subsiquently uninstalled) HitchHiker b.41.
Anyone have any ideas?
it is a network issue..
EDIT: I'm ridiculous.
After trying it out at work, I'm left to assume that the problem is a network issue (I'm able to connect at work).
This, however, brings me to a different question. I currently have four network connections set up: Blank, MEdia Net, My Work Network, My ISP. I have "Blank" set as the connection to use for both programs that connect automatically to the inernet as well as for those that connect automatically to my work network EDIT: this is my problem ... I had to set up "programs that connect to my work network ..." to use the work network connection (obvious?) I always assumed this meant programs that would only be accessing my work (I.E. a VPN client).. My question is that in order for me to connect to the internet from work, I have to add my proxy settings to the "Blank" connection. Adding them to the "My Work Network" connection does nothing. This leads me to believe that setting the "This computer connects to ..." dialog in ActiveSync accomplishes nothing. Can anyone help me with this? I'd like to connect using my work proxy while I'm at work and no proxy while I'm at home (is that too much to ask) but, apparently, selecting the appropriate value in the "This computer connects to" dialog in ActiveSync isn't enough.
Ok well i have been connecting my 8525 via Bluetooth PAN for a little while now for internet connection in my car computer. But all of a sudden it doenst work anymore. IN the internet sharing it says that it is connected and on my computer it says its connected but i cant load any webpages. When i double click the bluetooth connection on the computer it says that data is only being sent and nothing is being received. It also says that the signal it very strong... What could be the problem? O and the phone has a connection via 3g...
The latest "official" 8525 ROM has a 'Proxy Manager' where you can enable/disable the AT&T Proxy. Ensure that it is disabled, the proxy won't work on a WiFi or LAN connection. If your ROM has this, it will be listed under Start | Programs.
Otherwise, ensure that you're not using any other proxies.
Also, look at the Activesync settings on your PC, some older versions of Activesync have a setting to disallow the PDA access to the network.
OK I don't know if this is possible but with my Hermes(WM6) connected to my PC via USB using activesync 4.5. Can I get it to connect to the internet via the PC's internet connection (cable LAN to router).
I don't have wireless LAN ((
Thanks
Mike
if the pda is connected and my network is choosen as connection in
system settings network.....
in the pda
then it have access to thee same network as the pc it sync with
same thing with bluetooth sync
If I go into manage networks it only shows T-mobile and if I try set a new network they are all dial up types. when I try to connect to the internet I just get an error message saying connection was lost
i go into settings->connections-connections->advanced->sellect network
i get 2 dropdownbox's with my isp and my work network
if i pick my work network i only have network access over activesync
ok I tried that and all i still get is the connection lost error????????
I have also tried it on a wireless network, it connects fine and then the the same error
Hi,
Is there a way, to only use GPRS/UMTS connection while the device is connected via USB? When I'm connected via USB, my Hermes tries to use the ActiveSync connection for Internet, which won't work (company proxy), so I want to have UMTS connection, but still be able to remote-control via USB...
mine use gprs when i choose my isp in settings->connections->connections-Advanced-select network
even when connected to activesync
hm, I have for both settings there "E-Plus Internet", i.e. my provider... still it doesn't connect. As soon as I disconnect USB, it works.
then i would try unchecking enable advanced network functionality
in usb to pc in connections
still the same... doesn't connect
TauTau said:
Hi,
Is there a way, to only use GPRS/UMTS connection while the device is connected via USB? When I'm connected via USB, my Hermes tries to use the ActiveSync connection for Internet, which won't work (company proxy), so I want to have UMTS connection, but still be able to remote-control via USB...
Click to expand...
Click to collapse
On the PC head into ActiveSync, open up the Connection Settings for the device in question, try unchecking "Allow data connections on device when connected to PC".
Disconnect the device from USB, then reconnect and sync, then try to access the internet on the device.
hm, I thought exactly that option should be checked, because it says "allow wireless connections while connected to the PC". Nonetheless, I unchecked it, dis-/reconnected it, still no go.
Is this because you dont have the net on your PC?
Maybe your provider doesn't allow tethering. I.e. using the phones internet connection whilst connected to the pc.
You can use PDAnet ,download trial from here
http://software.palminfocenter.com/product.asp?id=4237
this will allow you to use the internet whilst connected to the pc, but this will also mean the pc can also use the internet of the phone, i am not sure if this is exactly what you want, as you dont indicate the reason why you want to be able to connect to the net on the device. Anyway using PDAnet, you will still be able to sync,browse and use the device as you normally would, as well as access the internet on the PPC and PC.
scousemartin said:
Is this because you dont have the net on your PC?
Maybe your provider doesn't allow tethering. I.e. using the phones internet connection whilst connected to the pc.
Click to expand...
Click to collapse
There is internet on the PC, though behind a proxy with auth (and some blocked stuff). Since the proxy auth isn't RFC conform it seems, using the internet connection on the phone doesn't work with most programs (i.e. weather updates), some programs even don't have a proxy option (and the one from "connections" doesn't work either). That's why I want the phone to connect itself by UMTS, while I still can remotecontrol it with PocketController. As everybody already said, it should be possible.
You can use PDAnet ,download trial from here
http://software.palminfocenter.com/product.asp?id=4237
this will allow you to use the internet whilst connected to the pc, but this will also mean the pc can also use the internet of the phone, i am not sure if this is exactly what you want, as you dont indicate the reason why you want to be able to connect to the net on the device. Anyway using PDAnet, you will still be able to sync,browse and use the device as you normally would, as well as access the internet on the PPC and PC.
Click to expand...
Click to collapse
mh, the PC shouldn't use the phone as modem, that would violate the security restrictions here badly. I'll try PDAnet and see if I can restrict that.
Edit: PDANet also can't connect. could it be possible, that it is some Windows policy on the Desktop preventing that?
Can you turn Data Connection off in CommManager on the PDA?
desolateone said:
Can you turn Data Connection off in CommManager on the PDA?
Click to expand...
Click to collapse
hm, not really....
I am interested in this as well.
I have the Titan (Sprint Mogul) and would like to be able to connect it to my work computer VIA USB and be able to charge the phone and control it via MyMobiler but the phone should use its EVDO cellular connection for the internet. Instead it appears to use the internet that my work computer has which blocks certain sites and ports for IMAP and POP.
I would like the phone to be able to check gmail (via IMAP) as well as go to any website I would like.
Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.
How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software
patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??