OK I don't know if this is possible but with my Hermes(WM6) connected to my PC via USB using activesync 4.5. Can I get it to connect to the internet via the PC's internet connection (cable LAN to router).
I don't have wireless LAN ((
Thanks
Mike
if the pda is connected and my network is choosen as connection in
system settings network.....
in the pda
then it have access to thee same network as the pc it sync with
same thing with bluetooth sync
If I go into manage networks it only shows T-mobile and if I try set a new network they are all dial up types. when I try to connect to the internet I just get an error message saying connection was lost
i go into settings->connections-connections->advanced->sellect network
i get 2 dropdownbox's with my isp and my work network
if i pick my work network i only have network access over activesync
ok I tried that and all i still get is the connection lost error????????
I have also tried it on a wireless network, it connects fine and then the the same error
Related
can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin
Ok well i have been connecting my 8525 via Bluetooth PAN for a little while now for internet connection in my car computer. But all of a sudden it doenst work anymore. IN the internet sharing it says that it is connected and on my computer it says its connected but i cant load any webpages. When i double click the bluetooth connection on the computer it says that data is only being sent and nothing is being received. It also says that the signal it very strong... What could be the problem? O and the phone has a connection via 3g...
The latest "official" 8525 ROM has a 'Proxy Manager' where you can enable/disable the AT&T Proxy. Ensure that it is disabled, the proxy won't work on a WiFi or LAN connection. If your ROM has this, it will be listed under Start | Programs.
Otherwise, ensure that you're not using any other proxies.
Also, look at the Activesync settings on your PC, some older versions of Activesync have a setting to disallow the PDA access to the network.
I am trying to connect to my office internet via Wifi. On my old atom, I just type proxy:80 on the My Work Network proxy and it will work.
On my new Wing, everytime I type proxy:80 and then open the IE, it can not connect to internet and while I check on the My Work Network the proxy:80 that I type before was deleted.
- If I syncronize the Wing using usb cable and connect to my laptop that plug to my office network, tha internet is work well.
- If I run on save Mode, the proxy:80 that I type on My Work Network is saved and I can connect to the internet.
Any hint and clue ?
Hello,
Is there any step by step on how to connect the internet using the wi-fi feature only and not the gprs.
I've got a cingular 8525 and I've tried all sorts of configurations to make the internet work but no matter I do every time I open the internet explorer to browse internet it tries to connect through GPRS.
How can I set up my phone to use wi-fi only and not gprs?
thanks,
Moscou
settings->connections->connections->advance
choose my network rather then my isp in both the dropdown box's
It didn't work! Any other clue?
donno to see if it's a connection setting then if you are sync'd with bluetooth to activesync it should use the network of the pc it's sync'd with
Don't know if this helps but I use the NODATA application to disable ISP and GRS so by default it always tries to connect to wifi.
http://forum.xda-developers.com/showthread.php?t=309108
I have a HTC Touch 3G (Jade) running Windows Mobile 6.1, i have managed to set up the VPN connection with my work server, the phone connects to the server (although it does say the connection is not encrypted), but when i set Activesync going of the phone the server drops the VPN connection
I have read about adding the server address into the exceptions list, but this does not help.
Any assistance would be much appreciated
Thank you
think it could be because if
settings->connections->connections->advanced-selecet network is set
to my home network
that would make the device try and use the network connection it get access to from active-sync and drop the connection it is using to connect to vpn
I would turn of the ability to use the active-sync as network connection
Rudegar said:
think it could be because if
settings->connections->connections->advanced-selecet network is set
to my home network
that would make the device try and use the network connection it get access to from active-sync and drop the connection it is using to connect to vpn
I would turn of the ability to use the active-sync as network connection
Click to expand...
Click to collapse
Thanks for the advice Rudegar
settings->connections->connections->advanced is set to;
Programs that automatically connect to internet = Mobile web
Programs that automatically connect to private network = My Work Network
I would try and change the later of the options
and maybe look in pc activesync for the ability to turn of network sharing
Help!!!!, still no joy
Does anyone know if it is because i am trying to connect to the VPN via a 'payasyougo' sim, having reads O2's info they only appear to talk about connections to VPN via 'pay monthly'?
Thanks