can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin
Related
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.
thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
thats it, it finally works. Thanks very much.
Glad to hear that, thomo
You're welcome anytime, dude :wink:
activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself
I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks
I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........
Thanks, this is what i am looking for now. I will try it
i can now only online with cable, not through Bluetooth connection
go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network
bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ
like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems
I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.
test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync
Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse
i'm very new to this kind of stuff so can someone plz tell me if i can use the wifi feature on my qtek to pick up a wireless internet connection and have the phone connected to the computer through activesync simultaneously? cus i can't seem to make it work. everytime i try to connect the phone to the computer through activesync after i have had the wireless internet connected, the activesync seems to disconnect me from the wireless connection. so im just wondering if i can connect those 2 connections at the same time or not?
no you can't, sorry
Activesync tears down the wifi connection and builds a new conection using you PCs networking. You can still access the intenet through you PC though.
thanks
thanks for the quick reply. yeah i know i can access the internet through PC connection but the problem is that my wireless adapter is broken so i want to have my qtek pick up the internet and then use activesync to transfer the internet connection back to my computer so i can go online on my PC, thats all. so there is no way we can work it around huh?
Hi
I have a Tmobile Vario (wizard).
AT work I use a laptop that is connected to the lan via the ethernet. The pc has wifi and bluetooth. Can I piggyback on this to get a connection to the internet using the vario ?
Thanks
if your toy has bt or wifi, yes you can...
It has BT and WiFi, but what do I need to do to connect to the office laptop to utilise its internet connection ?
Regards
Max
If you can, directly configure your phone to connect to the wifi connection, ignoring the pc.
However, if that's not possible, get your pc to connect to the net, then activesync to your pc using bluetooth and use activesync internet pass through to access the net on your phone.
V
check wiki about "internet over bt network"
vijay555 said:
If you can, directly configure your phone to connect to the wifi connection, ignoring the pc.
However, if that's not possible, get your pc to connect to the net, then activesync to your pc using bluetooth and use activesync internet pass through to access the net on your phone.
V
Click to expand...
Click to collapse
Thanks for that Vijay
Topic
i tried searching, but i get too much junk in the search.
when i connect using wifi, my connection keeps getting dropped, so is there a way to do it with USB?
thanks
Yes, AS by default shares the Internet connection of the desktop.
but its not working for me, i can't connect to aim with it or use PIE.
thanks
probably have to turn your proxy setting off.
how do i turn off proxy?
everytime i plug into active sync my phone gets an error like, ip address no defined or something.
thanks
I have the same problem is there a solution?
Please help?
Any fix for USB internet connection failure?
nicosomers said:
I have the same problem is there a solution?
Please help?
Click to expand...
Click to collapse
I think it is quite a common problem, come on guys can we get a fix for this?
Some of my data for you to consider:
Desktop PC connected directly to a router, Wizard, Prophet & Blue Angel all connect to internet via usb.
Laptop wirelessly connected to the same router none of the PDA's connect.
Laptop connected wirelessly to a different router (at work) again none of the PDA's connect.
Is it something to do with a wireless protocol?
Laptop and Desktop have slighlty different frewall software but I think I disabled it all on the laptop & still no joy.
Anyone able to use USB and wireless connection to connect to the internet?
I did see a registry hack offered by Dell, it relates to 'LS???' or something, tried it, no joy.
Any suggestions?
Try bluetooth ActiveSync instead of USB
Not really a fix for the USB problem but I can now do ActiveSync and browse the net together.
I have had a bluetooth dongle for the laptop for 'years' but never used it with the PDA. After some trial & error (about 45 minutes, not bad for me) I can now do ActiveSync with Bluetooth AND have access to the net THROUGH the laptop.
Speed is not as good as WiFi but it does work.
I read a tutorial some months ago on MoDaCo about setting up AS with BT. Suggest a search if you can't set it up by trial & error.
Hi all,
I set up my Trinity to also check my hotmail account. Ofcourse, when I do this outside the confines of my home Wifi network, the P3600 automatically connects to hotmail via my UMTS connection.
When I'm on the road I don't mind this, but when I'm at the office, where there is no wifi, I would like to use the connection my PC has to the internet. I was thinking about using BT for this but don't know if this is possible at all...
Anyone with suggestions?
I don't think this is possible via Activesync, but if possible I would like to avoid the use of it anyway...
Thx for any suggestions!
if connected to activesync one is connected to the network of the pc with activesync
unless steps have been made on the pc, pda or office network to block it
i surf with bluetooth connection to activesync all the time
Likewise i use the USB active sync connection to connect to the internet on my Trinity, and Alpine as well. The only restriction, as mentioned, is that if the PC has limited access rights then so does the PDA.
Hey thanks Rudegar & deedee, I didn't know this actually
So simple and obvious, but I never tried it out
Guess I'll have to install Activesync on the [email protected] too then....