Hi
I have a Tmobile Vario (wizard).
AT work I use a laptop that is connected to the lan via the ethernet. The pc has wifi and bluetooth. Can I piggyback on this to get a connection to the internet using the vario ?
Thanks
if your toy has bt or wifi, yes you can...
It has BT and WiFi, but what do I need to do to connect to the office laptop to utilise its internet connection ?
Regards
Max
If you can, directly configure your phone to connect to the wifi connection, ignoring the pc.
However, if that's not possible, get your pc to connect to the net, then activesync to your pc using bluetooth and use activesync internet pass through to access the net on your phone.
V
check wiki about "internet over bt network"
vijay555 said:
If you can, directly configure your phone to connect to the wifi connection, ignoring the pc.
However, if that's not possible, get your pc to connect to the net, then activesync to your pc using bluetooth and use activesync internet pass through to access the net on your phone.
V
Click to expand...
Click to collapse
Thanks for that Vijay
Related
if my PC are conected to the internet and i want to connect my xda II via bluetooth, can i use the current internet used by PC? how
WWW thru bluetooth
Yes, Bond your XDA to the PC and connect via activesync. Once connected, open the internet browser on the XDA and you can surf the net. :lol:
How bout without using activesync, cuz i want to connect to internet via bluetooth secretly without knowing the person using the pc.
ms bluetooth stack dont support it
read here for info about how you can do it
http://forum.xda-developers.com/viewtopic.php?t=10730
Network via bluetooth
Hi,
I am also trying the same thing. (Connecting without activesync)
Maybe you have to set up a network on bluetooth.
I would also like to print thru blutooth on the XDA2, so it uses the PC's printer on the network.
I am sure it can be done... not sure how :roll:
can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin
i'm very new to this kind of stuff so can someone plz tell me if i can use the wifi feature on my qtek to pick up a wireless internet connection and have the phone connected to the computer through activesync simultaneously? cus i can't seem to make it work. everytime i try to connect the phone to the computer through activesync after i have had the wireless internet connected, the activesync seems to disconnect me from the wireless connection. so im just wondering if i can connect those 2 connections at the same time or not?
no you can't, sorry
Activesync tears down the wifi connection and builds a new conection using you PCs networking. You can still access the intenet through you PC though.
thanks
thanks for the quick reply. yeah i know i can access the internet through PC connection but the problem is that my wireless adapter is broken so i want to have my qtek pick up the internet and then use activesync to transfer the internet connection back to my computer so i can go online on my PC, thats all. so there is no way we can work it around huh?
is it posible to share a pc's dsl internet connection using bluetooth to the universal so that it can browse the internet?
as far as i know, you can setup an internet connection, using bluetooth, but i dont think active sync supports it.......... try it 8)
establish the activesync connection, establish activesync over bluetooth. ensure that the pc's active sync connection allows internet passthrough.
this should allow you to surf using the adsl connection on the pc via bluetooth. you just need to wait for the synchronisation process to finish, but it works.
Hello
Can anybody help me how i can set up my smartphone that i can connect to the internet via BT?
I like to use the broadband internet connection of my home pc for browsing on the smartphone.
Greets,
Che
unless you set it to block it when you are connected with activesync you are connected to what ever network connection the pc have
http://www.geekzone.co.nz/content.asp?contentid=449
thanks for the answer. One thing i don't know is how i can set the phones internet explorer to use the bt connection and not the gprs.
i already have a activesync connection to the pc via bt, internet connection is shared.
in activesync, connection setting: this computer is connected to: maike it connected to the internet. that usually does the trick.
if you use a WM5 defice it's probably the only thing you can do to go online via BT, if you use a wm2003, it's whole different story. you can use PAN profile on the PDA and on the PC. I personally prefer the later one.
system->connections->connections->advanged
changed from myISP to mynetwork
then it use bluetooth for internet
and
" if you use a wm2003, it's whole different story. you can use PAN profile on the PDA and on the PC. I personally prefer the later one."
is only valid if you dont have vidcomm bluetooth stack
hi
thank you for the good inputs, that was what i have searched for.
It was a bit curios for me, because the OS Language of my phone is german, but now it is working!