Database Users

active sync

can u go on the internet using active sync connection if so how?

abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)

I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.

Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???

I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.

WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.

All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.

Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin

Internet Sharing problem

Hello
I have x7500 i have Att data plan which works prefectly while used on the advantage. When I try to share it's internet conneciton witha PC the problem starts.
I open up the program Internet Sharing in the Advantage have select USB as PC connection and MediaNet as Network connection. Advantage connects to the internet viag 3g and then i plug in phone to the computer, computer connects, I get the IP address assigned. Everything seesm ok but its does not work, web pages don't open, not replying to any ping commands. I tried this on two different PCs with the same result. Does anybody know what is the problem ?
Thanks

Don't know... everything you are doing is OK. That's the way I'm using it as far as I know.
Could be the XP firewall messing around? I usualy shutdown that crappy firewall included in XP.

ioevanc said:
Hello
I have x7500 i have Att data plan which works prefectly while used on the advantage. When I try to share it's internet conneciton witha PC the problem starts.
I open up the program Internet Sharing in the Advantage have select USB as PC connection and MediaNet as Network connection. Advantage connects to the internet viag 3g and then i plug in phone to the computer, computer connects, I get the IP address assigned. Everything seesm ok but its does not work, web pages don't open, not replying to any ping commands. I tried this on two different PCs with the same result. Does anybody know what is the problem ?
Thanks
Click to expand...
Click to collapse
You should be connecting to your PC by USB first. Any connection is then instigated from your PC after connecting Internet Connection on the x7500.
You just start IE.

Found solution
I finally called HTC Support they told me to disable advanced network functionality found in Settings >> USB to PC, restarted the device and works beautifully.
I am wondering did the Advantage come with this option disabled for others ? For this that USB internet sharing always worked can you check if that option is enabled or disabled ?
thanks

Hi All. Newbie here

OK I don't know if this is possible but with my Hermes(WM6) connected to my PC via USB using activesync 4.5. Can I get it to connect to the internet via the PC's internet connection (cable LAN to router).
I don't have wireless LAN ((
Thanks
Mike

if the pda is connected and my network is choosen as connection in
system settings network.....
in the pda
then it have access to thee same network as the pc it sync with
same thing with bluetooth sync

If I go into manage networks it only shows T-mobile and if I try set a new network they are all dial up types. when I try to connect to the internet I just get an error message saying connection was lost

i go into settings->connections-connections->advanced->sellect network
i get 2 dropdownbox's with my isp and my work network
if i pick my work network i only have network access over activesync

ok I tried that and all i still get is the connection lost error????????
I have also tried it on a wireless network, it connects fine and then the the same error

conncting pc -internet blackstone wirelessly?

I have a problem. ...well i have many, but this specifically -
I currently have a wirelss broadband router which sends the internet to the pc and the blackstone... but i cant figure out a way of connecting the pc to the blackstone wirelessly..... currently I have to access my pc with the usb cable....which is annoying....
my pc has asus wifi solo...
is there a way... ?

What excactly do you want to connect. ActiveSync isn't able to deal WiFi connections since a few versions, as this was mentioned to be a security issue.
If your HD is able to connect to the internet through your router, you have a valid connection, but you this doesn't mean that you can just access your HD with the explorer, or whatever you are supposed to do.

oh....so i cant connect to the blackstone with the pc through the broadband router...shame.... i could switch the pc wireless adapter to send mode to connect to the blackstone....but that would mean losing the internet whilst i did this..... how frustrating!!!

shakie_uk said:
oh....so i cant connect to the blackstone with the pc through the broadband router...shame.... i could switch the pc wireless adapter to send mode to connect to the blackstone....but that would mean losing the internet whilst i did this..... how frustrating!!!
Click to expand...
Click to collapse
Actually this wouldn't bring any advantage. You have a valid IP connection between your HD and your PC, but you also need some services like FTP, HTTP, or whatever.

What about Remote Desktop to your PC?

weather update using USB connection

Hi,
I am new to windows environment .
I want to access internet on HTC HD2 using my laptop’s internet connection.
My laptop is connected to the network and I access internet on it using the proxy which is configured in my browser’s configuration.
I can connect my HD2 using usb as well as wireless to my laptop by making wireless connection on my laptop as wireless router.
What additional configuration should be done on hd2 or xp so that I can update my weather updates using this link.
Regards
vk

mpimento said:
Hi,
I am new to windows environment .
I want to access internet on HTC HD2 using my laptop’s internet connection.
My laptop is connected to the network and I access internet on it using the proxy which is configured in my browser’s configuration.
I can connect my HD2 using usb as well as wireless to my laptop by making wireless connection on my laptop as wireless router.
What additional configuration should be done on hd2 or xp so that I can update my weather updates using this link.
Regards
vk
Click to expand...
Click to collapse
you can set in the activesync or windows mobile center settings, to enable the data connection in usb connect

I found a fix which made my internet connection through USB work:
- Open Registry Editor on your PC (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
- Right-click on the value list in the right site of window and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero.
- Disconnect and connect your device and Pocket Internet Explorer (and all other applications) will start working.

thanks jawab for your reply.
i updated my registry in xp with the changes you suggested but no success.
i am able to connect to my laptop with usb as well as wireless. even i am able to get remote desktop on my hd2 but not internet.
can you please suggest something.
connecting thru activesync also doent help
regards
vk

I'm sorry. For me I made the reg-change, connected the phone and wupti - there was internet through USB.

why not just connect your phone to your router via WiFi and use the internet that way? makes life a LOT easier

in my office my laptop is connected to wired network. there is no wireless
the only option for me to connect is using a USB connection or making my laptop as a wireless router.
both of them seem to be not working