Getting error while Syncing via Bluetooth - Touch GSM General

Guys , i am getting a connection error while i try to active syn my HTC with my PC. I have ensured that all neccesary ports are enable in bluetooth config and in Active Syn. Can someone assist me or provide me steps to do this ??

just try another cable or make sure that you are r using its riginal one

Try these things:
1) open activesync on your elf before plugging it in
2) open activesync on your pc before plugging it in
3) make sure windows media player and iTunes are not running on your pc
some people have had errors with syncing when media players are open
Hope this helps, it might not do. lol

Related

Activesync? way to communicate PC to phone?

it seems that HTC 8125 not a plug and play device for my laptop. do i need to install activesync in my PC? then if it is installed already.. do i need to run activesync in my phone and in my laptop?.. i am in few steps to unlock my phone... im a newbie in technical like this. i usualy use my phone for noob use.. call,mails,sms. not repairing my phone...
if you install eveyrthing by default, after installing activesyn on you pc, your phone should be relatively P&P.
expanded direction
Principe,
Disconnect your Wizard from your PC.
Once you've installed Activesync on your PC and started the App.,
in the settings or options in Activesync(PC), make sure you've enabled "connect via USB" and to "...sync when a device is connected".
Now quit Activesync(PC) and connect your Wizard to the PC with the USB cable.
Activesync should start and find your device.
You don't need to manually start Activesync on your phone; at least I haven't.
If you have bluetooth, you can sync that way too, but you'll need to have WiFi and/or phone radio OFF for it to work.
Detailed Bluetooth sync instructions are elsewhere on this forum.
good luck
R

WMDC and 8125

I cannot seem to get my 8125 to sync with windows mobile device center in Vista. I have tried both bluetooth and usb cable, and I have turned off Windows Firewall.
When I connected it via the cable, the only thing that installed and appeared my device manager was a Smartphone USB Sync under mobile devices. I have read other people are getting a windows mobile device under portable devices, among other things.
When I try connecting via bluetooth, Activesync just does not show up when I pair my phone and my computer as a service.
Are there drivers I can get from somewhere, or am I doing something wrong? Any help would be greatly appriciated.
Thanks!
You have to update the WMDC in vista inorder to sync. Had the same problem me self.. kinda crazy if u ask me eh...
I know it has been a long time but I have wmdc 6.1 and an 8125 with the most recent HTC cingular rom. How do I get bluetooth sync working? My activesync on my phone says that the service is not installed and I am kind of stuck there.
A ton of google searches have illicited no help. I figurd I would try here...
I am paired properly with the laptop as I am able to use the modem as DUN and get internet working with no problems. I cant seem to get the device center to recognize the phone for syncing my outlook with bluetooth.
Same boat
I am right there with you man. I have tried everything and still no joy. I am going to try and up date my bluetooth software and try it out. I'll let you know if it works for me.
I did it!!
Ok the key is to use the same Comm port in WMDC that the wizard uses. For example try to set up a bluetooth partnership with your PC via your wizard. When you see a popup on your desktop that you wizard is trying to connect make a not on which Comm port it is trying to use. (for me it was COM4.) from there go into your setting in WMDC and check the second box to allow the wizard to use differant ports. Select your port and click ok. You should be good to go. Let me know if that did or didn't work for you. Best of luck!

How to Activesync using bluetooth?

Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
You'll need to set up your ActiveSync (AS) in your PC to point to the port which your Bluet is using. After that, use your phone to 'discover' your PC and you should have AS service for your Bt in PC.
You mean...
In Bluetooth configuration on the pc I have COM9 assigned to bluetooth Serial Port and COM8 for ActiveSync. So you say I have to set as incoming serial port COM8 in P3600??
Configure the AS to use COM9 (in your case).
Thanks
But still no luck, it seems to be connected but activesync says there's no device in that port, I'm afraid it's a compatibility problem between my laptop bluetooth drivers and P3600 ones.
Anyway thanks for your help, I'll keep on trying...
Probably you can init a sync from PC, but the one I tried is to initialize a sync from my PPC. Once you have AS to use serial of your BT, then while discovering services (or pairing) from you PPC, your PPC should show that there is AS service on the PC. Start your AS on your PPC and sync.
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
El_Mariachi said:
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
Click to expand...
Click to collapse
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
i use this settings
http://www.htcwiki.com/page/activesync+via+bluetooth
it's work for me.
MrTW said:
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
Click to expand...
Click to collapse
Same here... Active sync does start and tries to connect when pairing... but it times out and the activesync service is not seen as an option on the ppc.
Julioski said:
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
Click to expand...
Click to collapse
Hi
What kind of software are you using microsoft widcomm or bluesoleil.

Big Problems :((

I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.
Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew
What cable do you use? I had similar problems with non original (asus) usb cable.
greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.
Did you try reinstalling ActiveSync on your PC?
yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !
I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!
i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...
Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck
Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?
daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP
nobody there to help me ?
If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.
Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.
I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.
If by monday it wont work, then i'll send it into service (i have warranty). But i hate service
all out of ideas...
Any ideas ?
Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?

[Q] have problem over sync via bluetooth

hi gays
i can,t connect my device too active sync via bluetooth.my pc is addet to phone bluetooth devices,but 'com ports' page of bluetooth settings is empty and don,t have 'existing port' .so i cant add incoming and outgoing port for connect to pc sync.
i hawe install wm 6.1 ultimate (onyx 4.9) on my htc p3450.how can i solve that problem?it is possible change operation system made it?
What PC OS you using? My friend with Windows Vista having similar problem, but I don't have this problem with Windows 7.
I,m sorry for the subsequence too answer.that is xp sp2.
in my phone on the bluetooth settings/com ports , the "new outgoing port" icon is now showed (after i add other bluetooth mobile phones to my device),but my pc is not found in the devices list of outgoing port page.
Is your PC actually set to visible? Most arent as standard and has to be enabled via settings?
yes,my pc is added to phone devices list and i can send or recive file with bluetooth
Have your tried allowing activesync to connect via com ports? Check which com port your usb is using and select that. Could be worth a go.
(I use win 7 so have windows mobile device centre = easier. Activesync I forget the functions of)
yes friend,i already allowed that,but i have onli 'com1' in com ports in activesync.and when i click on 'connect',it will test that and sayd 'your device is not detected'
i only want too create outgoing port for my phone,and i think it can be worked only i can creat it for pc.
can you give the link of that software u.re used on your coumputer??it can be worked on win xp 32bit??
.
.
.
.
.
((((((down with ahmadinejad!)))))))
Hi friend,
I think I read somewhere in Onyx thread that activating "Beam" can solve some connectivity problems...
The software i used is win vista/win 7 version of activesync - works better from my experience and is more intuitive.
Also, in the usb to pc settings there is an option to enable faster connection or something like that. I do not have my elfs with me today to check the exact options - that may help though. I remember using it on my xp machines before when having issues. But again, I do not connect over bluetooth all to often.
finally,I get that the problem is from my bluetooth device
i used from a mini usb bluetooth device (that was plug and play).when i install the windows xp that i used on my pc on the laptab (with internal bluetooth) ,activesynk was working with no problem on that.
it resulted that te plug and play bluetoothes dosent good choices for general applications
thanx from all of friends
thanks for letting us know. I'm honestly not sure why I didn't question that as we get that issue all the time at work.... Its been a long time since I have been in support here though!

Categories

Resources