Hello,
I've got a problem with my qtek s200.
The touchscreen only works when I press the opposite sides of the plastic case. Y mena buy opposite sides the side with Comm and Camera buttons and the side with the Standby buton and the pen.
So, I must press both sides with one hand, and then the touchscreen works perfectly.
If I don't press the plastic case, then the touchscreen doesn't recognise the mouvements of the pen or my fingers on the screen.
For example, in Start menu, I put the pen on one item, and the item appears in blue (select), but when I raise the pen (so, no contact between pen and screen) the item is deselected and the selected item is the last one (always the last one).
So, I imagine that there is a problem with the plastic case, which could press the screen on the lower zone, but I'm not sure in how to repare it.
Thanks you for any help.
Related
I've been using my Exec for little over a month now, no scratch on the casing nor screen, but I just noticed the tampo print on the side camera and backlight buttons are rubbing off.. No biggie but I'm a bit anal about these stuffs. How is your Universal holding up so far?
As far as the front camera (the one for video calls) is concerned it is okay because my screen protector came with two small round pieces to cover this camera as well as the lense of the main camera.
Yes the print on the backlight button is almost gone after about 1 months of usage. I also find that some marks (about 10 at the moment) developing on the screen side of the cover. This I believe are being formed as the top of the keys rub against the screen side of the cover when it is closed. Rest of the finish I find is pretty good till now with no abnormal wear of the pait work or anything else.
Kind Regards
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
I think all it does is turn the monitor light back on if it's off.. same thing as if you just tab on the screen
joebongo said:
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
Click to expand...
Click to collapse
You have 3 Universals! WOW!
If I am not mistaken, he probably remapped the backlight button to lauch an application. Here is how:
http://forum.xda-developers.com/viewtopic.php?t=34377
yeah, one jasjar with vodafone - rip off data charges and they just wouldn't let me sign up for decently priced data chunks, and it had a dodgy screen, and 2 mda pro's - the first kept crashing so got sent a proper new replacement which is good so far.
keyboard marks on jasjar
hi everybody. i want to use my jas jar with the screen side outwards.. what happens is that i notice the keys of the keyboard tubbing against the metal portion of the cover (the outside) when i turn the screen outwards. will they cause marks on the surface.?
Keys are made of rubber like material so it is very unlikely that it will cause scratch marks. I have a Piel Frama case which has a film like material covering the keys. Thats the best solution if scratching the device is your main fear
hi
using mine in laptop mode ever since i got it in mid oct, no scartches on screen and none of the buttons lost markings and except for two marks on side of screen because of the two elevated rubber protectors, no other scatch or mark any where else on the body.
I dont use any screen portector or any case but always make sure that i dont have anything else in my pocket except Exec like keys etc
hi .. sadly there are no o2 exec or imate jasjar cases availabe here in india. if anybody knows please let me know .. thanks
You can purchase them online from Piel Frama or Brando or PDAir or Proporta....
The pivot worked loose, but there a thread on how to fix it.
Going to try later this week.
bougt it in october, not really been using it but every thing is still ok. It needs resetting very 2 days coz it crashes. it cashes mainly in contacts list and other time during the change over from landscape to portrait.
never had a pda before.
does this happen much to others?
I have got my qtek9000 for a week now and I'm very satisfied with it (except for the BT performance). Today I noticed some very small marks/damage on the inside of the lid (on the left side of the TFT). I thinks they are due to keys (2/Q/A/Z) touching the lid when closed. Do other people have the same marks after a while?
One other question: the qtek 9000 is black colored, did they apply black paint or did they use black plastics.
brgds, Richard
You are right these are the keys touching. My Jasjar is now over 2 months old and the marks are not only on the LCD cover left side but also on top of the keys you mention. However none of the lettering of the keys is erased as the printed letters are just to the side of the key tops which as you know are slightly raised.
Kind Regards
I have had my Orange SPV M3100 for a couple of weeks and I really love it. A great upgrade from the Wizard, which I only loved a little bit less.
But there is something about it that bugs me nearly every time I use it: the two halves of the device become misaligned from each other too easily.
I quite liked having the Power button on top of the Wizard, unlike the Hermes design where the button is on the side. Now, with the Hermes, I hold it in my left hand (thumb on the wheel) and press the Power with my right index finger. Theoretically I am only holding the lower half of the device to do this (the half with the keyboard) but in reality the fleshy part of my thumb pushes the upper half (the screen) to the right nine times out of ten when I press the button.
This drives me up the wall. It seems I'm constantly lining the two halves up like an untidy pack of playing cards
I'm thinking about putting a tiny bit of Blu-Tack or something in the end of the sliding channel under the screen, so that it offers a bit more resistance before the two halves separate.
Anyone else noticed this little annoyance? Or am I just being a bit picky? I didn't have this issue with the Wizard.
I too am a leftie and have the same problems. When I hold it in my right hand it isn't as bad,
Izzard-UK said:
I have had my Orange SPV M3100 for a couple of weeks and I really love it. A great upgrade from the Wizard, which I only loved a little bit less.
But there is something about it that bugs me nearly every time I use it: the two halves of the device become misaligned from each other too easily.
I quite liked having the Power button on top of the Wizard, unlike the Hermes design where the button is on the side. Now, with the Hermes, I hold it in my left hand (thumb on the wheel) and press the Power with my right index finger. Theoretically I am only holding the lower half of the device to do this (the half with the keyboard) but in reality the fleshy part of my thumb pushes the upper half (the screen) to the right nine times out of ten when I press the button.
This drives me up the wall. It seems I'm constantly lining the two halves up like an untidy pack of playing cards
I'm thinking about putting a tiny bit of Blu-Tack or something in the end of the sliding channel under the screen, so that it offers a bit more resistance before the two halves separate.
Anyone else noticed this little annoyance? Or am I just being a bit picky? I didn't have this issue with the Wizard.
Click to expand...
Click to collapse
The same here. I got my TyTn back from repair this week, also for the sliding (and other things). At first it slided with a littebit more resistance but after a day it is back to where is was: with the "easy slide...
Same thing
Had that same problem. My first TyTN died.... so let's how it goes with this new one. This is not sliding now - it so new.
I'm just a little bit afraid how this thing holds together after a year or two? Please tell how it works with you guys having few months old machine.
Has been loose from the beginning. Always slides about 5mm while turning on
with left hand.
Me too HT638F ...
But I will return it because I want an english version.
I took apart my tytn, including the screen part.
After reassembling it, I've had random issues related to the keypad and screen.
By keypad, I mean all the keys on the screen part of the phone (D-pad, call/hangup,soft left/right, Internet Explorer & Email).
They will randomly cease working and randomly restart working (usually after turn on/off the screen with the power button)
The screen will also randomly turn white and come back on only if I turn off the screen and then back on.
Im thinking it has to do with a loose connection somewhere in the screen section of the phone, however, Ive taken it apart 2 more times to check everything out and the problem persists.
I wonder if anyone experienced the same thing and found which specific internal is the issue.
i would like to know too cause my buttons just stopped working. so the talk, end, message, Internet explorer, ect. but the left down up right and center button work.
I have the exact same issue.
All the keys (not keybord keys) randomly stops working. I am so used to it now, that I dont even try to answer the phone with the green key button.
The screen fades to white, sometimes (maybe 1-3 times a day).
The screen is white when awakening from "sleep mode", turning on and off the screen fixes that after a while (50% of the time white screen when from sleep mode).
I have found out that putting a finger nail between the keyboard and the screen, on the right hand side, when in closed position, and then putting the screen back on, gives me a 99% chance of funktional display.
The problem also accurs in the "full keyboard position", But putting the finger nail in the same spot helps.
So I think the problem of the connection is in the keyboard part of the phone, since those slide contact always are on the right hand side, and the display contact shift side.
I would lite to know if any body have a permanent solution for this.
(I have now opend my phone yet, and I have tryed the putting thin plastic between the display and the cover, with minimal success)
thanks for your time
alkizmo said:
I took apart my tytn, including the screen part.
After reassembling it, I've had random issues related to the keypad and screen.
By keypad, I mean all the keys on the screen part of the phone (D-pad, call/hangup,soft left/right, Internet Explorer & Email).
They will randomly cease working and randomly restart working (usually after turn on/off the screen with the power button)
The screen will also randomly turn white and come back on only if I turn off the screen and then back on.
Im thinking it has to do with a loose connection somewhere in the screen section of the phone, however, Ive taken it apart 2 more times to check everything out and the problem persists.
I wonder if anyone experienced the same thing and found which specific internal is the issue.
Click to expand...
Click to collapse
These are the exact symptoms of the "SCREEN FADING INTO WHITE" problem. See this thread for more info: http://forum.xda-developers.com/showthread.php?t=303872
The common causes for this are a bad connection to the D-PAD controller PCB (in the technical manual they mention it should be carefully checked and the really small screews with same torque making a 90 degree with the PCB), a bad controller (that was my case, had to order a new one) or not enough pressure on the square black chip on controller (some people seem to have fixed it by putting a plastic sheet in between the chip and the case, to apply constant pressure).
I suggest you try to re-open your phone and reconnect the D-PAD PCB as carefully as you can, double checking the connection and the screws there.
I did fix my problem, by ordering a new PCB and replacing the old (probably bad) one. It started to happen after I dropped my phone and it's the only thing that worked. Now my phone is as good as new.
Hope this helps!
Similar Issues with screen
I have similar issues;
Anything thats on the foreground gets closed by the 'x' button and if I slide it open the start button gets continually pressed!
Seems to be the top right corner of my TS thats at fault
sometimes it's fine....most of the time its not!
Andy.
I have the same! I have a huge dead spot in the middle of my (Tytn) screen, and if you tap there it actually activates the "ok" in the top right corner. The rest of the screen works ok. Whilst drawing in notes any drawing near the center dead spot results in a streak to the top right hand corner...
Bad screen?
Bad rom?
Bad motherboard?
lepic2019 said:
I have the same! I have a huge dead spot in the middle of my (Tytn) screen, and if you tap there it actually activates the "ok" in the top right corner. The rest of the screen works ok. Whilst drawing in notes any drawing near the center dead spot results in a streak to the top right hand corner...
Bad screen?
Bad rom?
Bad motherboard?
Click to expand...
Click to collapse
You can rule out the ROM and M/board in my view for this specific problem. Your issue is very similar (and I think has the same cause) as those who find programs close randomly when in portrait mode and when they open the keyboard the start menu often pops up untapped.
I think this is just a case of a bit of pressure being put on the screen top right corner. Some folks have tried the business card run around under the bezel fix and had some success others have had to return for replacement/repair.
Some have taken the device apart and removed the gasket around the screen under the bezel, but this is not guaranteed to work.
Others have replaced the screen and for this particular problem it is very rarely successful as the screen is not normally damaged.
If you have a warranty use it - all of the above "fixes" are warranty voiding.
Mike
Hi Mike
It's an interesting problem as when performing a click and drag in Notes (drawing mode) the center section of the screen seems to work normally - a square box can select an area right through the middle of the screen - suggesting that the screen (as you say) is OK. So what is causing the a tap in the middle of the screen to register in the top right hand corner, when we now know that the center of the screen can work and respond in the correct manner. The size of the affected area is about the size of a thumb print EXACTLY in the middle. Personally I would like to believe that performing screen alignment 4 - 5 times a day for the past year has worn out the center dot and that is affecting the surrounding area. The trouble is that this fault has been reported on this site a few times now, and everyone says it's caused by something else! What did I do immediately before this happen I hear you ask? I flashed a new radio rom and was fiddling with a piece of card I have wedged down the RHS side of the screen to try and help stabilise the screen alignment. Since this problem arouse, I have removed the gasket - but that hasn't fixed it. I'm going to try and boot up the phone out of the casing to see what "zero" pressure applied to the screen does.
I'll report back...
Lepic.
lepic2019 said:
Hi Mike
It's an interesting problem as when performing a click and drag in Notes (drawing mode) the center section of the screen seems to work normally - a square box can select an area right through the middle of the screen - suggesting that the screen (as you say) is OK. So what is causing the a tap in the middle of the screen to register in the top right hand corner, when we now know that the center of the screen can work and respond in the correct manner. The size of the affected area is about the size of a thumb print EXACTLY in the middle. Personally I would like to believe that performing screen alignment 4 - 5 times a day for the past year has worn out the center dot and that is affecting the surrounding area. The trouble is that this fault has been reported on this site a few times now, and everyone says it's caused by something else! What did I do immediately before this happen I hear you ask? I flashed a new radio rom and was fiddling with a piece of card I have wedged down the RHS side of the screen to try and help stabilise the screen alignment. Since this problem arouse, I have removed the gasket - but that hasn't fixed it. I'm going to try and boot up the phone out of the casing to see what "zero" pressure applied to the screen does.
I'll report back...
Lepic.
Click to expand...
Click to collapse
It will be interesting to see what results you get. You'll need the old rubber band technique to hold the battery in place while you do it!
Mike
Well it's not due to the case squishing the sides of the screen as I just dismantled my hermes, wired it all up in bits on my desk, powered it up and still the screen has a dead spot in the middle and phantom taps in the top right. Temperature is normal room temp, approx 22deg c today.
I'm not sure the exact mechanisms of how these touch screens work out where you are tapping (resistance, voltage), but it looks like there are 3 separate strips running around the screen. 1 goes straight across the bottom, two goes up the LHS and across the top and 3 goes up the RHS. Therefore there is a gap between strips 2 and 3 in the top RH corner. Coincidence? hmmm It seems to me for it to register a tap in the top RH corner, strips 2 and 3 would register low voltages (or high resistance) and bottom wouldn't register at all. Thus suggesting a fault with the PSU that powers the touchscreen. Taps near the edges work because they are near the edges and therefore the resistance is not too great and can be detected, taps in the middle and worse off because they are far from all the detecting edge strips.
Does anyone think that there might a registry tweak for boasting power to the touchscreen?
Hermes Whie Screen Problem
To fix the "white screen" problem, you have to take your unit apart, and reconnect the ribbon cable.
I have a new 8525 and it started happeneing to me, so I took it apart this week, and reseated the ribbon connector.
Fixed the problem.
Has anyone here read and understood all that is said here:
http://msdn2.microsoft.com/en-US/library/aa919680.aspx
Perhaps someone could compare the touch.dll in Black Majik to WM5 - should be the same right?
How come that HKLM/hardware/devicemap/touch doesn't show the touch.dll driver as drivername? Keyboard has it's driver...microsoft says it should say drivername = touch.dll
Do you all have that in your registry?
I've got my HTC magic last week and order a stylus pen to use with it. The problem is that the phone only respond to finger tap, and I must be holding it. If it is, for example, on the car support and I tap it with my finger it does not respond to touch. Does anyone else have this problem?
Thank you!
The HTC Magic has a captive touch screen, these types of touchscreens only work to the touch of the finger and hence will not work with a stylus.
I also have this problem, not that with the stylus ( I know it can´t be used with stylus). When laying the phone on a tabele an using with only my fingers the respons is very bad. When holding the phone in my hand it´s perfect.
Anyone knows why???
Instead of tapping the screen try a light press, it does not respond to a tap or quick jab with the finger. Go Here and you can read how the Capacitive Touchscreen works.
Clinton
Best thing that i've found to do, is make a circuit with the phone:
When its flat or in car holder if you make your thumb touch the bottom of the phone (near the roller ball) then use your finger to do the action required this seems to work!
Don't know why, but it does!
If anyone noticed, if you hold your Magic in one hand and use the other hand to point etc, the sensitivity sort of goes down.
Using the fingers (or rather thumb) of the same hand in which you hold your Magic would produce an insanely much better result!
atan.ismail said:
If anyone noticed, if you hold your Magic in one hand and use the other hand to point etc, the sensitivity sort of goes down.
Using the fingers (or rather thumb) of the same hand in which you hold your Magic would produce an insanely much better result!
Click to expand...
Click to collapse
That's due to the orientation of your fingers. Again, it's due to the capacitive screen. Using your thumb on the same hand that's holding the phone, you have more surface area touching on the screen where as if you "point" with the finger (I'm presuming your index) with the empty hand, the surface area is less. You can do a simple test. Press the screen like you were pointing at it then do the same but this time, press it like you were giving your finger print but not as wide.