Help. Need help urgently. I did CID ulock my device but I tried a new rom and now stuck in bootloader/ tricolour screen. U have tried everything from putting an original rom on the sd card and trying to boot that to trying to run mtty. Active sync doesn't recognise a usb connected device and neither does mtty. What can I do?
Jonathon
seabirch said:
Help. Need help urgently. I did CID ulock my device but I tried a new rom and now stuck in bootloader/ tricolour screen. U have tried everything from putting an original rom on the sd card and trying to boot that to trying to run mtty. Active sync doesn't recognise a usb connected device and neither does mtty. What can I do?
Jonathon
Click to expand...
Click to collapse
Hi Jonathan
you probably need this procedure called gold card http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Good luck
@seabirch,
You have PT
Related
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
Hi, I know that here ais lot of threads about removing hrad-spl, but noone works for me.
I cant connect my Herald to computer (activesync doesnt want to be connected).
Can anyone help me how to flash original spl prom sdcard or from bootloader (i cant flash any rom from bootloader, i only cant use sctivesync)
I hope you can uderstand me, and i hope you will help me. Thx Stepan
i've never heard of anybody removing spl using SD card flash, but heres how it SHOULD go.
extract the SPL.nbh from an RUU using something like 7-zip
extract it to root of memory card and rename heraimg.nbh
go into bootloader, it should detect
follow instructions on screen (slide side slider)
wait (it takes unusally long for sdcard flashes)
I tried this, but it doesnt work :-( I need to get it repaired.
any other sugestion?
I tried sspl (jumpSpl) and It dosnt work, there is only white screen after running it :-(
I need help, please.
How to remove HARD-SPL withou activesync.
Thank you very much.
how do you mean it didn't work?
you tried the SD card method right?
it didn't work how?
So. I flasher SPL.nbh, and nothing happened. I think it is because of overwrite protection of that hard-spl (right?)...
Does anyone know how to make sspl (jumpSpl) working?
Or how remove hardspl overwrite protection, or how to overwrite hardspl.
thx
Does anyone know how to get back original SPL, without activesync?
I need my Herald
if you can't connect to your computer even in bootloader then something might be worng with your herald's mobo or something
I CAN connect to pc if i am in bootloader (i can flash rom from bootloader).
I cant olny connect to activesync :-(
Dou you have any solution in this case?
you don't need activesync to flash rom from bootloader. you just need that generic "pocket pc" connection. Try using the un-HSPL process while your device is in bootloader
i really need help, i'm stuck on bootloader and i don't know how to re-flash because my computer won't recognize the usb?
my phone won't hard reset, someone please help!
my phone is an htc hermes, qtek 9600
Would be helpfull if you could tell us:
-Is there a hard SPL on the device.
-Which ROM are you using.
-what happend? Did a flash go wrong?
-Vista or XP?
As the-equinoxe says and the wiki and unbricking guide is easily found:
http://forum.xda-developers.com/showpost.php?p=1079011&postcount=1
Mike
Bo0mcxh402 said:
i really need help, i'm stuck on bootloader and i don't know how to re-flash because my computer won't recognize the usb?
my phone won't hard reset, someone please help!
my phone is an htc hermes, qtek 9600
Click to expand...
Click to collapse
Post #1160 http://forum.xda-developers.com/showthread.php?t=296722&page=116
Use the sd card method. My phone will not connect to active sync via USB, so i flash with the sd card. IMHO this method is safer and faster. Since you are stuck in bootloader, transfer files with a card reader from your pc, put the card back in the phone then soft reset. All should be good. Maybe once you re-flash you will get your active sync back.
the-equinoxe said:
Would be helpfull if you could tell us:
-Is there a hard SPL on the device.
-Which ROM are you using.
-what happend? Did a flash go wrong?
-Vista or XP?
Click to expand...
Click to collapse
theres no hard SPL
im using the old htc windows mobile 5 rom
yes, the usb cord got disconnected by accident
im using windows vista
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
Hi
Have been flashing roms all the time without issue.
I've tried to flash my mobile and get to HSPL boot screen but it doesn't recognise the leoimg.nbh no matter which rom i use
It says 'loading...' on a grey screen then goes to the red/green/blue screen and has 'serial' at the bottom.
i've tried upgrading hspl to 1.66 and also mtty format, oth worked fine, I now just can't flash any rom to the phone
Can anyone advise how I could sort this? could send paypal for your time if you can help me sort it
Cheers
ok
format again microsd to fat32,microsd not microsdhc,
charge your battery,must bt shure your rom its ok not corupted
Hi
Have tried all of this but still no joy at all.
Does anyone else have a suggestion or is there another process that can be used for flashing if a direct flash from memory card doesn't work but the phone is formatted?
Thanks in Advance
Adam
In case anyone has a similar problem:
I installed drivers for phone in bootloader USB mode from the mtty thread.
Set the phone to bootloader and plugged in usb and was able to flash from PC without having to be in winmo
I still can't flash from card but as this way works, it's not an issue.
Cheers