Hi, I know that here ais lot of threads about removing hrad-spl, but noone works for me.
I cant connect my Herald to computer (activesync doesnt want to be connected).
Can anyone help me how to flash original spl prom sdcard or from bootloader (i cant flash any rom from bootloader, i only cant use sctivesync)
I hope you can uderstand me, and i hope you will help me. Thx Stepan
i've never heard of anybody removing spl using SD card flash, but heres how it SHOULD go.
extract the SPL.nbh from an RUU using something like 7-zip
extract it to root of memory card and rename heraimg.nbh
go into bootloader, it should detect
follow instructions on screen (slide side slider)
wait (it takes unusally long for sdcard flashes)
I tried this, but it doesnt work :-( I need to get it repaired.
any other sugestion?
I tried sspl (jumpSpl) and It dosnt work, there is only white screen after running it :-(
I need help, please.
How to remove HARD-SPL withou activesync.
Thank you very much.
how do you mean it didn't work?
you tried the SD card method right?
it didn't work how?
So. I flasher SPL.nbh, and nothing happened. I think it is because of overwrite protection of that hard-spl (right?)...
Does anyone know how to make sspl (jumpSpl) working?
Or how remove hardspl overwrite protection, or how to overwrite hardspl.
thx
Does anyone know how to get back original SPL, without activesync?
I need my Herald
if you can't connect to your computer even in bootloader then something might be worng with your herald's mobo or something
I CAN connect to pc if i am in bootloader (i can flash rom from bootloader).
I cant olny connect to activesync :-(
Dou you have any solution in this case?
you don't need activesync to flash rom from bootloader. you just need that generic "pocket pc" connection. Try using the un-HSPL process while your device is in bootloader
Related
Sorry if this is a stupid question,
is it possible to boot off a MicroSD card (like the POLAIMG.nbh method), in order to Hard-SPL ?
thanks.
To solve such problem?
http://forum.xda-developers.com/showthread.php?t=384150
I wonder if it would be possible to install the HardSPL directly
from Bootloader instead of an ActiveSync connection
Olioaglio
Thanks for the reply, i dont have a bricked device so no problem really.
I'm just keen to be able to flash my cooked ROM onto a brand new device without my PC. i.e. just 1 or 2 MicroSD cards.
I know i can use bootloader mode to flash a rom using the filename POLAIMG.nbh, but that is assuming the device is already HardSPL'd.
So i was wondering if anyone has a POLAIMG.nbh file which can be used in bootloader mode to remove SPL ? without Activesync.
thanks.
Gus
i really need help, i'm stuck on bootloader and i don't know how to re-flash because my computer won't recognize the usb?
my phone won't hard reset, someone please help!
my phone is an htc hermes, qtek 9600
Would be helpfull if you could tell us:
-Is there a hard SPL on the device.
-Which ROM are you using.
-what happend? Did a flash go wrong?
-Vista or XP?
As the-equinoxe says and the wiki and unbricking guide is easily found:
http://forum.xda-developers.com/showpost.php?p=1079011&postcount=1
Mike
Bo0mcxh402 said:
i really need help, i'm stuck on bootloader and i don't know how to re-flash because my computer won't recognize the usb?
my phone won't hard reset, someone please help!
my phone is an htc hermes, qtek 9600
Click to expand...
Click to collapse
Post #1160 http://forum.xda-developers.com/showthread.php?t=296722&page=116
Use the sd card method. My phone will not connect to active sync via USB, so i flash with the sd card. IMHO this method is safer and faster. Since you are stuck in bootloader, transfer files with a card reader from your pc, put the card back in the phone then soft reset. All should be good. Maybe once you re-flash you will get your active sync back.
the-equinoxe said:
Would be helpfull if you could tell us:
-Is there a hard SPL on the device.
-Which ROM are you using.
-what happend? Did a flash go wrong?
-Vista or XP?
Click to expand...
Click to collapse
theres no hard SPL
im using the old htc windows mobile 5 rom
yes, the usb cord got disconnected by accident
im using windows vista
Hi,
I'm kind of new around here.
My problem is as follows:
- TyTN running PaysRom for about 9 months
- Started to get very sluggish
- Unable to get signal
When i booted my HTC the 'R' and 'G' that appear on screen and used to have values in front of it now display 'none'.
So, I connected it to my PC, 'activesynced' it and tryed to install a new ROM, hoping it would solve the problem.
But the new ROM wasn't installed sucessfully and now all I got is a brick.
I can't even connect it to ActiveSync since it's not recognized.
Is there any solution to my problem?
TIA,
hype
Can you get to the Bootloader?
Yes..
By pressing the Ok+Power+Reset on the bottom button, I see the 'RGB'+white thingie, that I believe is the bootloader..
What SPL do you have? Is it Hard SPL V7(2.10)?
If it is, use the sd card method to install a new ROM.
remember to backup your card 1st.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of the ROM you want onto it and rename to hermimg.nbh .
2. Insert card into Hermes and reset into bootloader.
3. If all things have been done right, follow the prompts....
If the radio ROM has died, I'd suggest trying to flash the Shipped Stock ROM 1st and see if that actually fixes the problem with the blank values on R & G. WM06 upgrade of shipped carrier ROM should also work.
Cheers...
Tks for your response.
I tryed the SD Card method already, with no sucess.
The red stripe shows as follows:
Code:
HERM200
IPL-1.04
HERM200
SPL-2.03
Everytime I tryed on another ROM I always perfomed it using SafeSPL.
Since I don't have 2.1, what can I do?
Tks for all ur help.
What happens when you try and flash a ROM over?
Do you get any kind of error?
You need to find the SHIPPED STOCK ROM. WM06 upgrade should be OK as the CID should match.
Put Hermes into bootloader and connect to PC after unticking "Allow USB Connections" in Activesyncs settings on the PC.
Run the RUU_Wrapper.exe file of the SHIPPED STOCK ROM. ven though activesync won't etect it, the flash file should. Follow the prompts.
Good luck as this seems to be the only way to fix this.
Good Luck...
You might be able to flash a Stock WM5 ROM using the SD Card method. Worked for me when I had SPL 2.03. In fact that's the only ROM it would let me flash over when mine bricked.
Guys, I have a P3300 that has a non-functioning USB connector. Charging works fine, but it will not sync over USB at all. The device is not detected at all. Even in the bootloader screen, when the USB cable is plugged in, it DOES NOT say "USB" in the bottom corner. Basically, the data functionality of the USB port is fried.
I had used USPL to flash a cooked ROM onto the device, and when the USB port worked, it all went fine. Now, with the USB port not working, I can only flash a stock ROM onto the phone using the memory card method. If I try to flash anything other than the stock ROM, it says "certificate invalid" and won't do it.
I read somewhere that there might be a method of doing the CID unlock by using the memory card, since the phone will not communicate with the computer via USB to use USPL the normal way. Can someone instruct me on how to do that? I have the USPL files on my computer, and simply renaming the .nbh file in order to try to use the memory card method won't work.
Can someone help me figure out how to use USPL or otherwise CID unlock the phone over some method other than USB to the computer? Thanks,
Well you can use activesync over BT, right? That might just do teh trick + SD card flash after it reboots to bootloader.
I might be wrong, it's just a thought
I tried that, but the USPL loader kills Activesync right at the start. So once the phone soft-reboots into the white screen and AS is killed, there is no more BT connection. So the USPL loader fails with an error of not being able to connect.
Can anyone else help?
I faced the same problem. White screen. I removed SIM and SDCARD. So I can flash normally.
Wiki: Artemis SD Card Flashing
Try reading the Wiki on Artemis SD Card Flashing
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom
hello. I exactly have the same problem like the thread poster. my mini usb only charges and cant connect data to any pc. its probably broken as common with using the O2 artemis on a car phone charger and starting the car while the phone is still sitted and charging.
MY QUESTION: does "Artemis SD Card Flashing" doesnt require the USPL? since its CID locked?
Hi guys!!
Is there any way to full format htc hd device without using task29?
Two weeks ago I flashed ROM via SD card, and since then ActiveSync doesn't work and I can't establish connection with my HTC HD and computer.
Now I can flash ROM only through an SD card. When I get into Bootloader mode does not recognize USB, but remains on the Serial....
Hard reset does not help because it only erase contacts, emails and other crap. I need something to wipe the device.
Any possible ideas??!!! Please....
didnt you by any chance disable USB connection in your activesync settings?
check that, maybe that prevents you from connecting...
if that's not the case, try updating your drivers...
if that fails, then AFAIK Task29 is the only way to format your device...
I tried to change everything in USB2PC and it didn't work. I took the device to servis and the repairman told me that he doesn't know what is the problem. He thought that maybe some port is broken or something like that and will replace it but none of that. Everything in device works fine. That he told me.
I think I made a mistake. When I flashed ROM via SD it all went great but in the end (after message: update complete 100%) I didn't make a soft reset. Instead I pulled the battery out to re-started device. Could it be the reason?!?!
So this AFAIK task29... what does it mean?!?!
how can i do this?! can you be more specific, some steps or something... please
and thank you for reply
oh yes, and i forgot to mention, when I connect device to PC it start to chargining battery normaly so can't be problem with USB cable as well
be sure to check your activesync or Windows Mobile Device Center settings...click the settings for mobile device or similiar and make sure Allow USB connection is checked...
AFAIK means "as far as I know"..
Task29 is a process with which you can completely erase your system partition...this little process solves a lots of issues..
Let me help you out.
First of all, connect your phone via USB to computer in bootloader.
Run USPL
Download the attached package - it is Task29 with Blackstone Radio 1.17
Extract archives and run Task29.exe
Follow the instructions - it is the same as flashing process
After task29 your phone will reboot but wont boot because there is no OS.
Take out battery and get into bootloader again.
Connect to PC via USB, run USPL and flash your favorite ROM.
I recommend Topix or Duttys.
Let me know if this worked out for you.
PS: Sorry that there are so many archives but I could not get it to smaller size
PS: Also do not forget to backup the data!!! this erases completely everything...
Sopis said:
be sure to check your activesync or Windows Mobile Device Center settings...click the settings for mobile device or similiar and make sure Allow USB connection is checked...
AFAIK means "as far as I know"..
Task29 is a process with which you can completely erase your system partition...this little process solves a lots of issues..
Let me help you out.
First of all, connect your phone via USB to computer in bootloader.
Run USPL
Download the attached package - it is Task29 with Blackstone Radio 1.17
Extract archives and run Task29.exe
Follow the instructions - it is the same as flashing process
After task29 your phone will reboot but wont boot because there is no OS.
Take out battery and get into bootloader again.
Connect to PC via USB, run USPL and flash your favorite ROM.
I recommend Topix or Duttys.
Let me know if this worked out for you.
PS: Sorry that there are so many archives but I could not get it to smaller size
PS: Also do not forget to backup the data!!! this erases completely everything...
Click to expand...
Click to collapse
OR You can try to flash a Stock ROM from SD ... probably works like Task29
Try using MTTY. Check firs for bad blocks. There is a command that will format the device.
Check Hermes WIKI, there are a lot of explanations about MTTY and how to use it. Also there are explanations about commands. Just be careful, you can destroy your device.
As far as I know mtty works on all win devices.
Cheers
I can't use anything...
The device can't recognize USB when I connect usb cable with it (it stays on SERIAL in bootloader), so I can't use task29, MTTY or similar applications or even flash new rom with RUU.
I think there is a malfunction on motherboard.
I tried to flash a stock rom with stock SPL 1.14 and this what happened:
It stays in bootloader mode with this error report
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again (in green field)
I tried to flash stock rom again and I get error code 00028002.
Stock ROM can't be flashed through SD card so now I can't use my guarantee......
so what do you do next to fix ..sorry my ingles
sollution!!
delete your previous connections in activesync, and then you need to HARDSPL your device, and after that you will be able to install romms from your sd card
there is a Thread for Task 29 for the Blackstone, please refer to it to minimize
redundancy.
jigners said:
there is a Thread for Task 29 for the Blackstone, please refer to it to minimize
redundancy.
Click to expand...
Click to collapse
As per above post, please use existing Task29 thread
Thread closed