I`ve got a problem, well actually my brother has a a problem. You see yesterday at work while his phone was in his pocket it somehow took a hard hit (he works in a kitchen). His screen is all messed up, its not cracked and the touch panel works, but the video is just purple and blue lines flashes arround vertically. Anyways he`s taking it in to Alltel tomorrow, to get a replacement I guess. I gotta re-flash back to stock and re-lock I think. Can anybody point me in a good direction on how to re-lock.
they won't warranty it anyway, mine was the same way and they denied warranty, so software isn't an issue, hopefully he has insurance
Related
my first for ages.
I recently purchased a wizard which looks to be virtually brand new.
now the other day I updated it the the o2 uk latest rom as it was running a really old rom.
and it has been running perfectly, i have not looked into running any other rom or performance upgrades etc.
now I was using the device in landscape and after closing the unit my screen went bright white and my pride and joy is now not usable.
I can still acept calls, the touch screen still works but the screen is pure white.
Ive contact a few places and they all say the screen has died and needs replacing
Does this sound right.
its a £80 fix if this is right. im so gutted.
any advice is great before i pack it up and send it off.
anyone please....
Can you put it into bootloader mode? If not i would say you have a loose connection on the screen to the mainboard i had the same problem with my old phone the screen disconnected for the main board so no display! If you cant get it replaced take it apart and carefully check the connections if still doesnt work i would try another screen or buy one.
even when i reset it, it stays whits so cant see anyhting on screen,
ive had someone take it apart and re-seat the cables and still just a white screen
so im off to purchase another one in hope this is all thats gone
as your phone is booting up press and hold the camera button, is the screen still white?
cant tell now. ive sent if off for repair.
Im gutted.
bleep said:
cant tell now. ive sent if off for repair.
Im gutted.
Click to expand...
Click to collapse
I had a similar issue, the keyboard sliding in and out must have worn out the switch that detects when it is open/closed. I had had my wizard a year and the screen started flickering, i dealt with it for a while, then the scree was stuck blank white unless if i pressed on the area of the phone that had the contact.
I had to send it back and got a refurb.
sounds like thats what happened to you too. Hopefully when you get it back it will be good as new
ive sent mine for a screen replacement tho not a repair.
now im worrying that its gonna come back in the same state.
Gulp
got my wizard back after having the screen replaced.
2 days later when ever i touch the bottom of the screen with pen, finger or even breath on it.
the screen goes off and the phone locks up and dies.
I have to take battery out and restart it and it then works great till i touch the bottom again.
Sound like a dodgy screen or something else.
Seems like a flexi strip(The one conecying the display to the mother board) sometimes if the strip develops a tear or is not properly connected this issue usually happens.
the shop doing the repair have said there is the following issues
1- padding issue on the screen (either too much or not enough)
2- Problems with the main board. (something on there is failling, hardware wise)
How the hell could this be happening on a device that was working perfectly
apart from the screen had died.
have they done more damage attempting the repair... I think so .!
I had the white screen 6 months ago. Luckily still under warranty period so got it repaired. It was the flexo-cable. since the fix no problem so far despites using the phone (also in landscape mode) daily.
when i got it back after the screen was replaced my xda worked great but as stated as soon as some preasure was applied to the bottom of the screen it would just die there and then.
I would have to take the battery out and then it would power on as normal
but again if i put presure on the bottom of the screen.. bang DEAD !
so sent it back to them and they told me what I stated above !
now waiting 2wks to hear what they are gonna do about it
not a happy bunny
still nothing back from the company thats doing the repair.
i dont know why they do this.
Im now thinking of getting my Xda back, selling it either on here or ebay and purchasing a new one.
Should i quit now or wait out for the miracle that they fix it completly.
Anyone in the uk reconmend a good repair company please im pulling my hair out.
http://forum.xda-developers.com/showthread.php?t=303872
theres your answer
well, my htc touch a while developed this look in certain lighting conditions with the screen backlight off that can only be described as looking like a opilspill, and i thought it might of been the touchscreen layers seperating, but untill just now it still worked fine so i wasnt too bothered, was working great one miniute and the next miniute i went to send a text and the touchscreen wasent responding. i tried a hard and soft reset , nothing and right now im extremly pi**ed off as i loved that phone and havent really got the cash for another one .
my question is what is the lightlyhood that the only thing gone is the digitiser, and has anyone used any of them dodgey chinese sellers on ebay as thats the only place i can fine them i dont wanna be leaving XDA developers so early
any advice will be aprieciated, feel like a famy pet jus died or summan
EDIT: dont think its relevent but im using the blue elves rom v6 i think
well you can try mymobiler and use your pc to try and correct any issues
i think the issue might be hardware as i have done a hard reset, did try using mymobiler just to use the phone after i had hard reset, but its either a bug or the way that the touchpads calibrated that i cant now after a hard reset.
what happens is the inital tap the screen to setup, that works, but mymobiler wont allow me to to the screen taps to calibrate.
Back to the box than till i can find a faulty one on ebay in the uk
Find another faulty one of eBay? Why not send it in to HTC and make use of their manufacturer warranty, hopefully its still covered. But worth a shot.
am going to do just that. it was definatly the digitiser have managed to get tho old digitiser working in a strange way, just pressure over time, am posting on it now, but its gonna need replacing but at least I got my phone back thanks everybody
what you are describing is newton rings
Beware of HTC's large screen phones.
Any force applied to them, even taking off a screen protector, is enough to produce "newton rings" and the screen stops responding to touch.
Not much use for a touch screen phone.
HTC refuse to cover this by warranty and refuse to negotiate. expect to shell out up to $500 to repair it. With no guarantee that the next screen won't do the same thing.
Design or Materials fault but they won't cover it by warranty.
well at least i know what caused it, sorted it a while back by replacing the digitsier myself. ended up getting it from the chinese ebay seller. before that i took out the digitiser, applied weight to the top and froze it lol, it worked but i replaced the digitiser anyway.
thanks for all your replys
I have a serious problem. I noticed a bug in the Desire alphas where sometimes when the backlight went off during a call it would not come back on when the i took the phone away from my face. It always came back on eventually.
Ok now yesterday I flash alpha 8 and it worked fine. Now all of a sudden I reboot my phone bc the battery dies and the backlight won't come on at all! I know the phone is on because the haptic feedback and cap buttons are on and if I leave it on I can tell it's getting notifications.
How am I supposed to fix this?! I can't even see anything to get into recovery! My phone is unusable.
Find out every step to do a backup in recovery... see if that works
BlackHawk6 said:
Find out every step to do a backup in recovery... see if that works
Click to expand...
Click to collapse
Load into bootloader
Press power button once and wait about 20 seconds
press volume down once then hit power button once
Wait about a minute and move the trackball down slowly 3 time and press it
Scroll it down once and press it four times
trevorwhopkins said:
I have a serious problem. I noticed a bug in the Desire alphas where sometimes when the backlight went off during a call it would not come back on when the i took the phone away from my face. It always came back on eventually.
Ok now yesterday I flash alpha 8 and it worked fine. Now all of a sudden I reboot my phone bc the battery dies and the backlight won't come on at all! I know the phone is on because the haptic feedback and cap buttons are on and if I leave it on I can tell it's getting notifications.
How am I supposed to fix this?! I can't even see anything to get into recovery! My phone is unusable.
Click to expand...
Click to collapse
Unless your screen is broken you can always boot into recovery.
Take out the battery, then put it back in.
Hold the trackball down as you power on, this will boot you into fast boot.
Select bootloader, then select recovery. and bam your in recovery and can reflash.
I can get my phone into recovery. When I adb in i can push the phone into recovery, then when i hit adb devices it shows my phone and says recovery.
the problem is the backlight is not on even when i am in recovery. i would say the screen broke, but it seemed like a software problem, because it was just slow to come back on. It still always came back on. then I left it in my car chargine and it never came on again. The phone seems to be working fine though.
Kind of off topic, but did your call screen do this before flashing to Desire at all? Did you recently install a screen protector? I had problems with the PhantomSkinz screen protector making the proximity sensor less sensitive and behaved exactly how you're describing...as soon as I took it off it started working again. I'm now using a dcmugen88 screen protector and it works great.
interesting. i have one of those bodyglove or whatever protectors. best buy glued it onto my lcd. i suppose it could have started around that time. but would the proximity sensor still be deactivating the lcd even when its booting up or in recovery?
Oh, I must have overlooked that. The screen protector wouldn't cause any issues on startup or in recovery... guess it must be the rom then.
well, figured it out.
warning to n1 users: watch that lcd screen under the glass. its not nearly as sturdy as the glass cover.
the lcd/digitizer screen under my glass got cracked and stopped working. no drop, no warning, no funny colors. htc does not cover this in the warranty no matter how good the actual phones condition is.
i almost didnt get another n1, a phone thats inherantly weak (i found dozens of similar reports over the web) is not exactly a good case for a system with no insurance, no store to walk into, and very unhelpful support. they try to be very nice, but the rep i talked to couldnt even tell me whats covered and not. he just said let us charge 500 bucks to your card and we will ship a replacement, then decide if we think you have to buy it once we get your old phone. i demanded to talk to someone who did know. his manager denied hearing about lcd screen problems... after the original rep said he and htc knew this was a common problem. google didnt even return my email when i first contacted them saying my backlight was broken.
so again, be careful and get a good case.
trevorwhopkins said:
well, figured it out.
warning to n1 users: watch that lcd screen under the glass. its not nearly as sturdy as the glass cover.
the lcd/digitizer screen under my glass got cracked and stopped working. no drop, no warning, no funny colors. htc does not cover this in the warranty no matter how good the actual phones condition is.
i almost didnt get another n1, a phone thats inherantly weak (i found dozens of similar reports over the web) is not exactly a good case for a system with no insurance, no store to walk into, and very unhelpful support. they try to be very nice, but the rep i talked to couldnt even tell me whats covered and not. he just said let us charge 500 bucks to your card and we will ship a replacement, then decide if we think you have to buy it once we get your old phone. i demanded to talk to someone who did know. his manager denied hearing about lcd screen problems... after the original rep said he and htc knew this was a common problem. google didnt even return my email when i first contacted them saying my backlight was broken.
so again, be careful and get a good case.
Click to expand...
Click to collapse
ive got 5 bux that says the power connector to your lcd came lose so now the screen just doesnt turn on ... i have heard this issue before... send it in and get it fixed if its going to cost you then tell them to **** off and send their phone they just sent you back
Whatever rom you are running ask the developer of rom in his thread. That's where you will get the best information and help.
I have a Desire Z (bell) that i got off the forums to use with AT&T.. everything went great, i love the phone.. about 3 weeks ago i went to check the phone after leaving it on the charger while i slept and the screen was grey with black lines. all the lights work, and i could even answer phone calls by judging where the slider was. pressing on the screen gets haptic feedback. The phone did not fall while i was asleep. I actually havent dropped it once since i got it (around april)
So i called HTC and the phone is within its 1 year warranty but they said since its a canadian phone i will have to call that carrier, so i called bell and they said "call HTC. If you dont live in canada we wont help!"
So when i call HTC back they tell me to call futuretel and they will fix it. I call futuretel and they say no because im in america.
So i call HTC back again and tell them it is ridiculous that the phone is still under 1 year warranty FROM THEM and they wont fix it. they are supposed to be getting in touch with futuretel for an exception or something but i am tried of waiting.
Attached are pictures of the phone in its current state. It is running cm7 and i had not flashed anything on it for atleast a month before it messed up.
Has anyone else had this problem or have any ideas over what has caused it? I've looked online to find images of another screen doing this and haven't been able to.
i forgot to mention that i offered to pay for the repairs from HTC since i was not the original buyer. They still said they won't work on it. It's not that i dont want to pay for the repair, I cant find anyone to do it!!
You need to fix the screen, mine broke two times:
-Dropped once, the screen was OK, then broke in my pants
-Dropped it again on the floor and my screen broke a second times
Seriously, repair your screen by yourself, you will save about 100$ just because you don't pay for the technician.
Just follow this tutorial, it's pretty easy.
http://www.youtube.com/watch?v=u-dR8CHEGjY
Then you may want to buy the screen on ebay with the tools for the phone:
http://www.ebay.com/sch/Replacement...&_dmpt=PDA_Accessories&_trksid=p3286.c0.m1538
Good luck!
thanks. i wanted to get a good idea of what needed replaced to see if i could fix it myself. i didn't know if it was the LCD, or the cable ribbon thing or something else. thank you
bfinch said:
thanks. i wanted to get a good idea of what needed replaced to see if i could fix it myself. i didn't know if it was the LCD, or the cable ribbon thing or something else. thank you
Click to expand...
Click to collapse
I cannot garantee it's the LCD, but both times I got those kind of white screen + black lines it was the LCD for me.
Hi All,
I just got back my phone from the repair center. While they didn't fix my original issue (microphone) because of some BS reason (crack in the bezel). my phone came back with another issue.
Right as I turned it on, the screen went completely blue, and then the screen went out. Nothing but blackness. The digitizer still works because I can feel the vibrations as I interact with the phone.
I was curious, has anybody faced any of these issues? Like, the screen going blue, then going out. Also, has anybody else heard of the clowns at LG warranty messing up their phone as opposed to returning it to the state it came in? How did you guys deal with it?
Thanks
It happens when people works. Simply return it to warranty, probably is only a connector fault