Touch Response - Burn out motor? - XPERIA X1 General

i recently installed touch response, and just realised that my vibrate doesn't work at all, with any application. anyone had the same problem? any solutions?
Joel

No burn Motor
I cannot help you to solve your problem, but I can tell you mi case.
I already have installed the Touch Response since I bought my X1, and really I don't have any problem with the vibration motor.
But I read a thread that somebody have a problem with the motor because he installed the htourch on the X1, the problem with this program is because the Xperia do not have a heat sinked LED, and using this app his LED burned and melted over the vibration motor damaged it.
I recommend you if you have this program installed or unistall it or do not use in the bright mode.

My vibration motor is gone too. It only makes a short clicking noise, when it wants to start the vibration, but it instantly dies.
I used htorch, but my LED is still working fine, so I doubt the LED damaged the vibration motor. I never used TouchResponse.
Anyone else got problems with the vibration motor? Perhaps it is just another quality issue... If you do also have problems, please report your version.
My version is 08W47, bought in Germany

eaburger said:
I cannot help you to solve your problem, but I can tell you mi case.
I already have installed the Touch Response since I bought my X1, and really I don't have any problem with the vibration motor.
But I read a thread that somebody have a problem with the motor because he installed the htourch on the X1, the problem with this program is because the Xperia do not have a heat sinked LED, and using this app his LED burned and melted over the vibration motor damaged it.
I recommend you if you have this program installed or unistall it or do not use in the bright mode.
Click to expand...
Click to collapse
The same happened to me (but I had the program tourch button installed). First I noticed that the led had moved sideways a little. This movement increased and after a while I only heard a little ticking sound from the vibrator and finally it went dead. My phone has now been on repair for two weeks.
I miss my phone! And when I get it back I will not us it as a flash light any more!

Related

No LED on answer/hangup buttons on hinge

Hi,
When i first setup my Exec using personal mode, the answer and hangup buttons on the hinge woudl illuminate when a call came in (when the unit is closed like a laptop). Now i am using it in corporate mode, the LED's don't illuminate. They only illuminate when the screen is rotated into PDA mode.
I am assuming this is a reg hack. Does anybody know what it is? or has anybody else got this problem?
Cheers
Paul
They don't illuminate when the device is closed, only when you have the screen open or facing outwards.
hollinshead said:
They don't illuminate when the device is closed, only when you have the screen open or facing outwards.
Click to expand...
Click to collapse
And very annoying it is too - especially when both buttons look so similar when not illuminated. This must be hackable?
This has got to be one of the most annoying features of the exec.
Also i have found that if the device is closed, MSVC does not recognise anything you say when activated via BT.
I have never really played with the device in personal mode as the GUI is bollox so cannot comment on if the buttons light up or not when the device is closed. But what i do know is that when it is closed the screen is switched off as if the device is in standby mode, maybe this has something to do with it.
I try to memorize the position of the green button in relation to how I always hold the phone and feel for it like a Braille board. So far I get it 75% of the time.
is anybody using the 'Personal' install on their exec? can they confirm if the LED's are illuminated or not when the phone rings when it is closed?
Cheers
Paul
Someone who's actually opened the Universal may be able to confirm this, but I suspect that the answer/hang up buttons on the hinge don't actually have LED's. I believe that they simply use the light from the screen's backlight to illuminate. As near as I can tell, they're only on when the screen backlight is on.
If that is the case, then there probably won't be a way to get them to illuminate when the case is closed, unless someone can figure out how to get the backlight to stay on when the case is closed (which would also be a big battery waster)
Brett
Yup, i can confirm this. I've just removed the cover on the top of the hinge. There is one wrapped cable coming out of the base at the right hand side. This then splits off, the main part goes up into the pivot hole, and a thinner wrapped wire brakes away from this and attaches to a small pcb which has the buttons and the LED's mounted on it.
Yes, the buttons are only illuminated when the backlight is on, but the brightness of the buttons remains constant even when the backlight brightness is turned down.
Cheers
Paul
As far as I see it, even if the backlight has to come on that wouldn't be a problem - after all, the phone is waking up in order to ring. I also often open up the screen slightly to see who's calling, then close it and press the answer button - therefore switching on the backlight initially would actually save time!
Maybe somebody knows of a "wake-on-ring" hack :lol:
I've just noticed it with my new Qtek 9000 and I was very worried, because I thought my device is broken.
But now I know this is "normal", but it's very annoying :?
I wish I had this problem! .. since yesterday my JJ seems to have those lights permanently on even when I switch the device off
Guys, I've made a program that will keep the hinge leds on all the time.
Actually this is an accidental discovery for a program I'm working on for this thread:
http://forum.xda-developers.com/viewtopic.php?t=37201&highlight=
Those guys want to be able to use the keys and phone functions with the lid closed.
I'll post more in that thread, but basically closing the lid puts the hardware keys in a special state such that they are not responsive at all until the device is woken internally (eg by an incoming phone call). Actually, can someone confirm that the hinge keys work when a call comes in but the lid is closed. I presume they must, since they don't do anything else!
So, the hinge lights are on when the screen is on. But the screen is switched off when the lid reaches about 10 degrees to closing. But the hinge lights can be kept on nevertheless
Grem: are you using TCPMP or a similar program to play music etc in the background? Anything that tries to keep the phone "on" when the lid is closed will keep the hinge lights on.
V
Hi vijay555
I've actually just done a complete cold re-boot and reflashed to the original i-mate factory ROM to see if that would help, then came here in search of anyone having a similar issue.
It started yesterday, i suspect I've had an internal meltdown somewhere, plugged it into sync, noticed a few minutes later it had randomly done a warm reset and appeared stuck on the blue i-mate screen, picked it up and the sucker was hotter than an AMD without a heatsink! I suspect it's warranty time for this unit
Grem, that's worrying. What were you doing at the time? What brand/operator etc is the phone? It might be worth posting batch numbers or whatever for people that have this kind of problem so we can identify if some are worse then others.
V
It's an i-mate straight from the wholesaler no particular operator. Had it a couple of months, have seen other reports on the forum here which sound perhaps similar in that they've overheated.

X1 Vibration module broken

Hello fellas
my X1 fell to the floor a few minutes ago. Nothing seems to be damaged...BUT Vibration isn't working anymore...and rarely it's working but it's loud and doesn't sound like normal.
Some friend mentioned that the vibration unit is inside the battery...is it true?
Best regards
Andorra
nope, it's not inside the battery. if you flip your phone over facing down, the vibrating motor is just behind the camera LED and to the left a little.

[Q] Vibration broken?

Hi,
I have a HD2 since november last year and so does a friend of mine. Today I tried to fix something for him on his HD2 and I noticed that his vibration is alot more noticeable, more a bouncy vribration instead of just vibration. My HD2 only vibrates a little.
Has anyone else expierienced this 'bug'? And is it fixeable?
- Rob
check whether the LED flasher is little bit inside the housing
if yes then remove the housine and fix it

[Q] Galaxy S4 Vibration

Hi guys,
i bought my s4 the day one and it works great for now :laugh: but i have a question on the device's vibration. It looks like stronger than s3, so strong that during vibration seems that plastic parts vibrate Is it normal? It looks like an electric razor xD :good:
Also found the Vibra is stronger on the S3
Might have a look to see if the flex/motors are the same and try a swap but not yet
yeh I found when i first got it the startup vibrate (can that be turned off by the way?) was really strong and sounded/felt unpleasant.
Have turned down the haptics and vibrate in settings and now its ok. Except that startup vibrate is still intense.
there is vibration settings, you can choose rhythm (not sure if it's the correct word) and the strength of vibration. just try that
paddylaz said:
yeh I found when i first got it the startup vibrate (can that be turned off by the way?) was really strong and sounded/felt unpleasant.
Have turned down the haptics and vibrate in settings and now its ok. Except that startup vibrate is still intense.
Click to expand...
Click to collapse
I didi the same, but in general I wanted to ask if it was normal
Markz88 said:
Hi guys,
i bought my s4 the day one and it works great for now :laugh: but i have a question on the device's vibration. It looks like stronger than s3, so strong that during vibration seems that plastic parts vibrate Is it normal? It looks like an electric razor xD :good:
Click to expand...
Click to collapse
Hi
It seems to be normal! Unfortunately. Some plastic parts vibrate even if you lay the phone on the table... Just knock on the chassis with your finger an the phone vibrates....
Cheers from Switzerland
Pat
sia1996 said:
Hi
It seems to be normal! Unfortunately. Some plastic parts vibrate even if you lay the phone on the table... Just knock on the chassis with your finger an the phone vibrates....
Cheers from Switzerland
Pat
Click to expand...
Click to collapse
I agree with you, on my device happens the same thing, the color of mine is White Frost.
But a friend of mine has bought the phone (color Black Myst) some days ago, his device's vibration isn't strong and knocking on the chassis with a finger doesn't make the phone vibrate.... Should us be worried for ours?
Thank you for your replies.
UP
I know this topic is oldish but I also have one question.
Does your gs4 vibration make a kind of broken sounding noise? I don't know how to describe the noise but it's like if some part inside is loose.
When I hold the device firmly it vibrates normally. I removed the cover and pinpointed the noise source, seems to be the camera or the sim/SD slot.
It's rally bad when you start the device and it vibrates once, or when you spam press the bell or heart beat vibration preview in settings.
It's also just the first few milliseconds of the vibrate when it's really bad I think.
Do you guys have the same thing?
I got the same problem... Thought it was just me...
Sent from my GT-I9500 using xda app-developers app
Is there any solution for the crackling sound coming from the phone when it vibrates??

Proximity sensor issue after screen replacement

Hi all!, I would like to coment this issue and ask if anyone experimented this, my little son smash with a spoon my x compact and cracked the screen, I replaced twice the screen and tested 3 diferents proximity sensors (cable flex) already and still i'm having this issue.
any comments or help will be very appreciated
regards from chile!
I hace the same issue
ramirowski said:
Hi all!, I would like to coment this issue and ask if anyone experimented this, my little son smash with a spoon my x compact and cracked the screen, I replaced twice the screen and tested 3 diferents proximity sensors (cable flex) already and still i'm having this issue.
any comments or help will be very appreciated
regards from chile!
Click to expand...
Click to collapse
i recently replaced the lcd and also have the same issue. It detected that my screen is covered so i can't hang on a call because the screen wont turn on.
but suddenly it works when i cleanup the screen with a damp cloth. but sometimes it doesnt work.
I know this thread is super old, but before I start a new one on exactly this - I had to disassemble my phone to replace the audio jack, and since then, my proximity sensor won't work at all. I double checked the flex cable and plug, tested the sensor outside the phone, still nothing. It ONLY works if I put sth white or metal-like exactly 2 mm away from the screen, no nearer, no further. Its super strange and annoying. Was anybody able to solve this?
Edit: LED and ambient light sensor (which is exactly the same sensor) are working! And before the sensor stopped working I did not even touch it at all!

Categories

Resources