Hi,
I have a HD2 since november last year and so does a friend of mine. Today I tried to fix something for him on his HD2 and I noticed that his vibration is alot more noticeable, more a bouncy vribration instead of just vibration. My HD2 only vibrates a little.
Has anyone else expierienced this 'bug'? And is it fixeable?
- Rob
check whether the LED flasher is little bit inside the housing
if yes then remove the housine and fix it
Related
My XDA Mini has a screen issue.
Only part for the screen (the middle) has stopped responding to the touch pad.
How do I fix this, has anyone else had it?
Cheers
Max
My Wizard (O2 XDA Mini S) has just developed this problem. The touch screen does not respond to touches around the middle of the screen. The outside edges of the screen work fine however.
I've had it for about 4 years now though, so I suppose its lasted well really. It's a G4 and I installed a WM6.1 ROM on it about 6 months ago (which is awesome btw, makes the phone sooo much better / faster!) but I don't think this is related to the problem.
Any known fix for this? I think it's a hardware issue since I also have the problem where upon opening/closing the keyboard, the screen goes white with multicoloured vertical lines and the phone emits a high pitched noise (have to put phone into standby then wake it up again to resolve). This, whilst annoying, I can live with, but not now the middle of the screen no longer responds to touches
I read somewhere its to do with the ribbon cable that connects the screen and main board, its gets trapped or worn over time as the keyboard is slid in and out. So I guess the touch problem is a more severe symptom of this? Can it be fixed?
Also a point of interest is that I keep the phone in the case a lot of the time. Could the magnets have possibly affected the screen? Anyone else with this problem keep the phone in its case a lot?
Thanks in advance,
Jamie
i recently installed touch response, and just realised that my vibrate doesn't work at all, with any application. anyone had the same problem? any solutions?
Joel
No burn Motor
I cannot help you to solve your problem, but I can tell you mi case.
I already have installed the Touch Response since I bought my X1, and really I don't have any problem with the vibration motor.
But I read a thread that somebody have a problem with the motor because he installed the htourch on the X1, the problem with this program is because the Xperia do not have a heat sinked LED, and using this app his LED burned and melted over the vibration motor damaged it.
I recommend you if you have this program installed or unistall it or do not use in the bright mode.
My vibration motor is gone too. It only makes a short clicking noise, when it wants to start the vibration, but it instantly dies.
I used htorch, but my LED is still working fine, so I doubt the LED damaged the vibration motor. I never used TouchResponse.
Anyone else got problems with the vibration motor? Perhaps it is just another quality issue... If you do also have problems, please report your version.
My version is 08W47, bought in Germany
eaburger said:
I cannot help you to solve your problem, but I can tell you mi case.
I already have installed the Touch Response since I bought my X1, and really I don't have any problem with the vibration motor.
But I read a thread that somebody have a problem with the motor because he installed the htourch on the X1, the problem with this program is because the Xperia do not have a heat sinked LED, and using this app his LED burned and melted over the vibration motor damaged it.
I recommend you if you have this program installed or unistall it or do not use in the bright mode.
Click to expand...
Click to collapse
The same happened to me (but I had the program tourch button installed). First I noticed that the led had moved sideways a little. This movement increased and after a while I only heard a little ticking sound from the vibrator and finally it went dead. My phone has now been on repair for two weeks.
I miss my phone! And when I get it back I will not us it as a flash light any more!
So I've had my Cingular 8125 for 2 years now...
Just lately it's been dying out, some of the keys are hard to press and now the screen is discolored and fades out white sometimes, and the most recent problem is that I can't really hear phone calls unless the phone has the slider open.
I was just wondering if anyone else has encountered these problems and has a fix? I was thinking it may be the flex ribbon...
Any input is greatly appreciated!
hy
i don't know if this helps u , but i have seen on youtube a video on how to fix the ribbon or smth like that. i think the guy from there had a simillar problem with yours. i watched the video 2 years ago so i might be wrong.
The vibrate function on my HD2 has not been working from day dot so I decided to open it up and check the vibrator. I pushed the vibrator in tight and closed it all up again.
When I turned on the phone, the screen was displaying what looked like 256 colours. The screen is still responsive and everything else seems to work (except of course for the vibrator).
Question is: Have I broken the screen or is there a connection problem which would cause this?
Any ideas please?
Im not really sure. Was there anything you did that made it stop working?
ok - for anyone in the same situation. I have managed to put a 3mm split in the flexi cable between screen and motherboard.
Off to ebay to get a new one now.
Hey guys, I've had my G2 for a couple weeks now, it's been great except for one thing. If I push down slightly on where the headphone jack / micro USB port is, the screen starts freaking out and pressing random buttons, until I turn the screen off and on. Anybody else getting this error ?
corban123 said:
Hey guys, I've had my G2 for a couple weeks now, it's been great except for one thing. If I push down slightly on where the headphone jack / micro USB port is, the screen starts freaking out and pressing random buttons, until I turn the screen off and on. Anybody else getting this error ?
Click to expand...
Click to collapse
No prob for me
corban123 said:
Hey guys, I've had my G2 for a couple weeks now, it's been great except for one thing. If I push down slightly on where the headphone jack / micro USB port is, the screen starts freaking out and pressing random buttons, until I turn the screen off and on. Anybody else getting this error ?
Click to expand...
Click to collapse
Can't confirm. You need to get a replacement
Never had that issue. Try doing it while the quickmemo is active and let us know what you see.
I believe there to be build quality issues, but I didn't see too many other people posting until you did. My first G2 was defective in that every time I plugged in to either the headphone jack or the USB port there was a chance the backlight would stop working. If I squeezed the LG logo it would start working again (note, the screen itself was fine and kept displaying an image and would respond to touch, but the backlight wouldn't illuminate the screen). There are probably a number of connections in that bottom area and it seems they're prone to failure. My replacement G2 is fine, though, and a Google search for my symptoms came up empty so it must not be widespread.