The vibrate function on my HD2 has not been working from day dot so I decided to open it up and check the vibrator. I pushed the vibrator in tight and closed it all up again.
When I turned on the phone, the screen was displaying what looked like 256 colours. The screen is still responsive and everything else seems to work (except of course for the vibrator).
Question is: Have I broken the screen or is there a connection problem which would cause this?
Any ideas please?
Im not really sure. Was there anything you did that made it stop working?
ok - for anyone in the same situation. I have managed to put a 3mm split in the flexi cable between screen and motherboard.
Off to ebay to get a new one now.
Related
Hi guys, I need some help here. I literally threw my wizard out of the window shaking out my bedsheets and it dropped three stories into the backyard.
When I turned it on again (the drop had opened the battery case), at first the screen was bright white, then turned darker and darker showing some sort of noisy stripes (static, not moving). When it goes into standby and is turned on again from there it does the same thing.
some facts:
- there is no visible crack in the display (neither from the side, I disassembled it)
- all buttons and the touchscreen are still responding (u can see that because the background lighting responds to them)
- the wizard is still accessible via usb
- I don't know whether the phone still works because I can't enter the pin w/o display.
It seems strange to me that the display should stop working while the touchscreen and the background lighting remain unhurt. I am thinking about replacing the display (only available together w/ the touchscreen and bg-lighting), but I am afraid that it might rather be a problem with the communication between the main unit and the display, even though there was no visible damage there.
Does anybody have experiences with that kind of behavior of the display?
Is the display that vulnerable that it breaks before the rest (light, touchscreen)?
I didn't find any cases similar to mine in the forum. If there are and my questions would be answered there, please direct me there.
Thanks for the help
ff
Try taking it apart, the force of inpact could have made a connection loose.
Disassembling I disconnected everything possible. Next thing would be to take apart the display/bglight/tscreen.
did you mean that? looks pretty fragile to me...
thx
yeah, I wouldnt mess with the display .. lol .. I meant a connection somewhere inside the device... like a loose ribbon or something
Yeah, seems hopeless. Guess I'll have to buy a new display and hope it works :-(
I'll post again once I got some results...
Problem solved
For the archive:
I exchanged the display and apparently only the screen was broken and the rest was unharmed.
I'd also like to add that two days ago (1 week after I repaired the thing) I dropped a plastic bottle on the phone in such a stupid angle that it broke the touchscreen. the next thing I will report here is whether it is possible to exchange the touchscreen only by doing some soldering.
a/t
Really need help here,
My hermes suddenly decided that visuals are no longer needed.
That means the screens stays off all the time (yes even in bootloader mode).
It works, receive calls and flashes roms but in no situation can I see anything on the screen (pitch black screen).
I've got no warranty so I took it apart and checked each cable and connector - no issues were seen. I tried changing SPL-s, RUU, Roms all worked but left my tytn with that black screen.
Did anyone see this happen or has any advice?
This sucks big time :-(
No one? Oh man, I guess it's dead then :-(
Last bump before giving up and throwing it away - please?
send it to me if your gonna throw it away : - 0
I've given up on mine as well. It has white screen though. Where do I dump this thing?
If it is out of warrenty, I would take it apart as is sounds like the hardware, check the connections to the LCD. Does the backlight still work, or if you put it in strong sunlight, can you see the LCD working?
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
what are you guys willing to sell your pdas for? Mine fell in a puddle and i need one for parts. The white screen might be fixable the first couple of times but then it dies off for good, the black screen i've never heard of.
So if you want to sell for a reasonably cheap price let me know, i can buy a new keypad online for $50. So around there would be nice!
i.a.wright said:
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
Click to expand...
Click to collapse
I just tested this on mine and actually got some results.
mines the opposite though, it will NOT work with any pressure. I left all the screws loose for that board under the buttons, and left the LCD assemble screws out on that end and it works, But if I press the keys it whites out again and won't come back until I repeat the dis-assemble/re-assemble
I had a similar problem but this was after someone dropped mine on the floor. The screen would just be white screen, while everything worked. If I pressed the bottom right of the phone it would sometimes come on and stay on for a little while but would eventually always go to white screen.
I did manage to use the phone but had use a program called Net Control which allowed me to control the phone over WIFI with the phone screen shown on the PC. Got the phone replaced in the end by the people who dropped it.
i got the flex cable and my phone still has the white screen problem....wtf///
I changed the entire housing on my Hermes as it was looking a little battered. All seemed ok but now when I slide the keyboard open the orientation stays in portrait mode. Also the keyboard light stays off. I've tested another keyboard pcb from an old broken hermes and the same problem persists.
Does ANYONE have any clue as to how I could fix this, or if it's even fixable. Not as bothered about the backlight....
Also my internal mic volume has gotten really low. I have to switch to loudspeaker unless i'm in a really quiet room!
there is a magnet in the housing that triggers a switch to swap the screen, did you swap it over?
It'll either be what beermonster65 said above, or possibly the ribbon connector which connects the screen to the mainboard isn't plugged in properly - I had that when I opened mine up to repair the sliders.
beermonster65 said:
there is a magnet in the housing that triggers a switch to swap the screen, did you swap it over?
Click to expand...
Click to collapse
As far as I knew I switched over everything from the old housing. What does this magnet look like and where is it? If i've lost it is there a possible fix?
Thank you both for your responses so far.
Any news on the mic issue also?
Hi mates yesterday i bought a used herm...with excellent condition. but when i opened any dialog. the window closed automatically. and the screen light remains always on. and touch is creating problems.
and after some time the touch screen totally stop working. i dont know what happened. al the buttons are working fine. i upgraded my t-mobile herm to its original t-mobile wm6 rom. and again the touch screen is not working. and the screen light always stay on..
so is this hardware or software problem.?
guide me if you have any clue about this..
according to my thinking.. i think some button is pressed continuesly.. but everything is working fine.. only the touch is not working.
broken digitizer for the touch screen, buy a replacement lcd/digitizer together and replace yourself, about $100Aud. Use Mike Channons site to download the service manual. Use the search function and type in "htc service manual hermes".
As for the light, you will have to use your buttons to navigate to settings>system>backlight>battery power and external power. you can select how long the backlight remains on for.
Cheers...
Hi mate thanks for your reply.. Actually the situation is that. the screen is working perfectly. all buttons are also working perfectly. but suddenly the touch feature stopped working.
that time i was just opening some menus and they closed automatically. it looks like that there is some button pressed. and the screen light never stops. it continuously remains on. all buttons are working perfectly and everything. on the touch feature is not working.
i upgraded my device with genuine shipped t-mobile wm6 rom and again it stopped at the starting screen where i have to click the screen and the device brings the window for stylus adjustment.
so i wanna ask that is this also possible that some touch drivers are corrupted or something like this.? or is this a hardware failure.?
Kind Regards
I had same problem, it was hardware. Thats why I said to change the lcd. It is theoretically possible to replace JUST the digitizer, BUT, it is a MAJOR hassle.
As for getting past the alignment stage, look up Remote Screen Alignment. Its a cab file that stores the alignment settings on your pc. You WILL have to have a friend that has the same phone so you can get their settings as you need to copy them to your pc first. You can then copy the settings to your phone so you can use it until you replace that pesky lcd...
Cheers.....
I had a similar problem with my hermes. After a lot of investigating, I found out that this is a heat related issue with the hermes. The unit will heat up an some connection somwhere gets messed up and continually registers ghost taps on the upper right corner of the screen, which causes the continual opening and closing of programs/task manager. This overloads the phone which then causes the screen to eventually become unresponsive due to excessive computing.
With my phone, it must be heat related because it will only occur during or after heavy use or overcharging. Other people have had this exact problem with the conclusion being overheating. The worse part is, there is apparently no way to fix this, replacing the screen doesn't change anything. setting your screen alignment very far left will fix the problem but then everything you tap needs to be compensated for.
Good luck, hate to be the harbinger of bad news, but it's better to know whats wrong and that you can't fix it then not know whats wrong and keep trying to fix it.
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
kingsfan said:
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
Click to expand...
Click to collapse
Some of the suggestions in the white screen thread/s might help. The problem is that those who have the heat related problem will find it very difficult to trace the actual fault. The heat may be causing miniscule expansions on the boards / components and connectors. The tiniest of cracks or poor connections can therefore break with the expansion.
Another theory is that rather than heat it might be a capacitor that is breaking down either over time or again through heating. Unless you are a skilled electronic engineer that is virtually impossible to check, particularly since schematics are not available.
You might just be lucky if you dismantled and re-assembled - it might just re-set a connector or adjust a board so it does not get affected in future. That would be very much a matter of luck and of course potentially the situation might be made worse!
Mike
Hi mates. I am back with some issue.. i moved my device to a repair center and he said that its a software issue. and he fixed my device without changing any rom.. i dont know how..
but again when i open some window like programs. the right scrollbar make a problem... when i move scrollbar it automatically press the top close button..i aligned my screen 3 times but same problem with right side scroll bar.
and after playing with it. the touch totally stopped.
now the thing is.all the buttons are working fine and everything is working fine. even sms and calls. but when i check sms and press my scroller button. it displays the right click menu instead of opening the sms. and the screen light is continuesly on. as something is pressed. so. i think this thing wil help. i am now trying this method to check my pc.
http://inuchanbt.blog54.fc2.com/blog-entry-99.html
check this out as well.
i will send you details soon.
might just have something lodged between the case and screen.. also to get rid of the screen alignment, cable it up and delete welcome from the startup programs and then reset it.. should get you past it so at least you can use it until you repair your screen
Hi all,
I had a touchscreen issue (sometimes not working) in my HD2 so I ordered a new fabric screen+lcd assemby. I replaced it very carefully but now when I plug new lcd it is not working. Phone is working, buttons, vibration, hear the sound when turning on but there is only backlight on display and just shows black screen. I am sure that display is ok because I tried to put old one (wich was still working before replacement) and it has same issue (backlight works but display is black). Can you give me some ideas what is wrong ????
damaged lcd ribbon connector on mainboard or ribbon not being inserted fully or latched securely
Ty booting to bootloader ...
Help
The flex cable is not attached correctly or the main board is broken and before you close your phone try it. If you can't do this give someone your phone and he will recover for you.
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
wojcimierz said:
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
Click to expand...
Click to collapse
Have you tried turning phone on with volume down button pressed???
You should see 4 colors. Try this. I search for you.
http://forum.xda-developers.com/showthread.php?t=2263026
try with this link.
Yes I have read this before but I think that white screen problem is not sloved in this thread. But maybe I could be wrong.