hello all
i need a solution ar informatins or any other tricks for uploading rom frmo sd because the usb not connect anyway the device freez at the 2nd boot screen . and i can enter bootloader normaly i dont know whre is the problem of usb
thanks
Related
I was reflashinmg my Wallaby and the process stopped with and error, noew I have only the bootloader runnin, then the only way to restore Windows is to have an SD image, and I have no one, or use the USB FLASH OPTION .
Could someone explain me how to flash Win back to the Wallaby by the USB FLSH OPTION ?
Thank You
You can download an image from lumpis kitchen, just check the box at the bottom of screen that says sd card flashing, then you can use xdatools and a card reader writer to program the card to make it flash your phone when you enter bootloader mode. I know nothing about usb flash, sorry.
http://lumpistefan.dyndns.org/
Good idea, I will try to get a card driver, thank you !
Anyway and meanwhile, if someone knows how to flash through the USB bootloader, the assistance will be welcome.
USB FLASH MODE
I also need to know how to made an USB FLASH MODE upgrade. My SDslot in MDA seems to be broken.
Any help....?? Pleaase....
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
HI ALL
please I need your help
i have an Orbit XDA with German ROM from O2
I installed another rom on the device and everything was ok
i made the First synch and everythng was ok
NOW i'm connecting the Device with PC and Nothing happen i made a hard reset i tried t remove theUSB From the DEVICE MANAGER ON MY LAPTOP and still this problem i'm so confused i tried to make a synchronization through the Bluetooth it's working but i need the USB cause i need to change the ROM So could you please tell me what to do with the SYNC MY LAPTOP OPERATING SYSTEM IS WINDOWS VISTA!
OR PLEASE TELL ME WHAT TO DO AND HOW TO UPGRADE THE ROM FROM THE MICROSD CARD
THANKS A LOT
Sd card flash
You can look at this wiki
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to start the device in Bootloader mode by prssing and hold Nots(voice command button) and press the restart button try to upgrade your rom while in bootloadr
* Bootloader is the multicolored screen
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
i get a message ( unrecognized ... ) when my s200 is connected to the pc with usb cable, as i cant flash through the usb, is there any way to flash from the sd card ? I'm ready to reward anyone how can do this for me . i have also the sound problem as i cant hear anything from the front speaker, already tried the software hack with no luck.
Awaiting a miracle , appreciate your help