Database Users

XDA manipulator

where do i get the XDA manipulator

http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator

Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS

I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e

I really appreciate the link thanks
BR

wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me

There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan

thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks

still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated

radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps

mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done

mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on

Problems with MDA PW10A2 (unlocking)

I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!

If I understand corectly I need to put boot on my sd card.....

look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD

thnx....and....where can I find rom image?

http://www.romkitchen.de/

no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year

sos!!my Polaris can't upgrade,even hardspl V2 doesn't works

my Polaris SPL-1.52.0000
when i flash hardspl ,it stops at 0%,and screen of the Polaris remain in bootloader mode(screen in three color) ,and the PolarisUnlocker doesn't works too.
anyone who can tell me why,i'm really appreciate!

Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!

nightfear said:
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
Click to expand...
Click to collapse
thx for your answer,the same ,ERROR 262

try replacing the data cable and reinstalling the activesync;
then enter bootloader
see that you get "usb" and then try to upgrade.
first thing i would do is reinstall the activesync (sometimes bad drivers get registered in windows)

cwb1230 said:
when i flash hardspl ,it stops at 0%,and screen of the Polaris remain in bootloader mode(screen in three color)
Click to expand...
Click to collapse
Did you follow instructions and unplugged and then replugged your Polaris when it told you to on the bootscreen?

operating system?
do you use windows XP? if vista you should try on XP..

Remove your SD card before flashing !
Unplug and replug your device when you see 'Replug device'

thanks you !!my computer is xp,i have three data cable,none works!enter bootloader or Remove SD card doesn't works too!
Now i'm try to reinstall my computer system......god bles me!

Hello,
I've got the same problem, different computer, windows xp, sd removed, camera+power+reset the update stay at 0%.
Does someone got another idea ?
Regards

Same for me. No updates can be done....
Indicator stuck on 0% no matter what I'm trying to update.
Any1 pls????
JB

Same thing happens to me. I am stuck on bootloader with official SPL, and i can only flash Official rom, nothing else works. Not even HardSPL. V2.
How can i try to flash HardSPL from SD card ? any instructions ? please ?

goranapo said:
Same thing happens to me. I am stuck on bootloader with official SPL, and i can only flash Official rom, nothing else works. Not even HardSPL. V2.
How can i try to flash HardSPL from SD card ? any instructions ? please ?
Click to expand...
Click to collapse
you should go here to get a tutorial Flashing Via MicroSD Card

Hakim Rahman said:
you should go here to get a tutorial Flashing Via MicroSD Card
Click to expand...
Click to collapse
Thanks but that thread is for HTC LEO, ?!!?

goranapo said:
Thanks but that thread is for HTC LEO, ?!!?
Click to expand...
Click to collapse
Well, this
- Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is)
- Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "POLAIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to POLAIMG.nbh
- Copy the file POLAIMG.nbh to the root of your microSD card
- Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears.
- You will first see a tri-color screen then the information on the card. Press power button to start flashing.
- After all these are done, press the reset button located at the bottom of the phone to reset the device.

USPL via memory card method?

Guys, I have a P3300 that has a non-functioning USB connector. Charging works fine, but it will not sync over USB at all. The device is not detected at all. Even in the bootloader screen, when the USB cable is plugged in, it DOES NOT say "USB" in the bottom corner. Basically, the data functionality of the USB port is fried.
I had used USPL to flash a cooked ROM onto the device, and when the USB port worked, it all went fine. Now, with the USB port not working, I can only flash a stock ROM onto the phone using the memory card method. If I try to flash anything other than the stock ROM, it says "certificate invalid" and won't do it.
I read somewhere that there might be a method of doing the CID unlock by using the memory card, since the phone will not communicate with the computer via USB to use USPL the normal way. Can someone instruct me on how to do that? I have the USPL files on my computer, and simply renaming the .nbh file in order to try to use the memory card method won't work.
Can someone help me figure out how to use USPL or otherwise CID unlock the phone over some method other than USB to the computer? Thanks,

Well you can use activesync over BT, right? That might just do teh trick + SD card flash after it reboots to bootloader.
I might be wrong, it's just a thought

I tried that, but the USPL loader kills Activesync right at the start. So once the phone soft-reboots into the white screen and AS is killed, there is no more BT connection. So the USPL loader fails with an error of not being able to connect.

Can anyone else help?

I faced the same problem. White screen. I removed SIM and SDCARD. So I can flash normally.

Wiki: Artemis SD Card Flashing
Try reading the Wiki on Artemis SD Card Flashing
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom

hello. I exactly have the same problem like the thread poster. my mini usb only charges and cant connect data to any pc. its probably broken as common with using the O2 artemis on a car phone charger and starting the car while the phone is still sitted and charging.
MY QUESTION: does "Artemis SD Card Flashing" doesnt require the USPL? since its CID locked?

please help. can no longer flash from card (RESOLVED)

Hi
Have been flashing roms all the time without issue.
I've tried to flash my mobile and get to HSPL boot screen but it doesn't recognise the leoimg.nbh no matter which rom i use
It says 'loading...' on a grey screen then goes to the red/green/blue screen and has 'serial' at the bottom.
i've tried upgrading hspl to 1.66 and also mtty format, oth worked fine, I now just can't flash any rom to the phone
Can anyone advise how I could sort this? could send paypal for your time if you can help me sort it
Cheers

ok
format again microsd to fat32,microsd not microsdhc,
charge your battery,must bt shure your rom its ok not corupted

Hi
Have tried all of this but still no joy at all.
Does anyone else have a suggestion or is there another process that can be used for flashing if a direct flash from memory card doesn't work but the phone is formatted?
Thanks in Advance
Adam

In case anyone has a similar problem:
I installed drivers for phone in bootloader USB mode from the mtty thread.
Set the phone to bootloader and plugged in usb and was able to flash from PC without having to be in winmo
I still can't flash from card but as this way works, it's not an issue.
Cheers