I connect my Touch HD to the PC using usb cable, i copy files to SD card and then i disconnect correctly.
Every time it freezes for good and i have to soft reset it.
Anyone experiencing this issue? Is it a way to solve it?
I have exactly the same issue. No idea how to resolve. Sorry. It is a pain in the bottom.
Related
I have installed a localization software. But after restart of the phone Windows did not load. Only blank white screen. What is the problem and can I fix it?
Sounds silly, but the phone isn't hooked up to USB is it? I had that happen when i soft resetted while connected to USB. All went well when i pulled the USB cable out and soft reset again (though it might not be your problem).
hi, am sorry if this has been posted but i cant seem to find the solution of my problem.
am using cingular 8125 and upgraded it to WM6.1 and activesync 4.5.
now the problem is, i can not find a disconnect button or how do i disconnect my phone from my PC.
Sry,cudn't get what you are trying to ask ? wud you elaborate a little more.
well,if you simply want to disconnect your phone,then just 'unplug' your phone from the usb cable or if you want to delete partnership with the phone,you can do it in the 'File' option of the AS.
Cheers!
can i just unplugged it directly without disconnecting it? i mean just like the usb flash drive before you can unplugged it you have to do a safely remove hardware operation first. and also like the xda II mini there's an option or a button when you want to disconnect it or stop the sync from the pc.
i hope, i explained it correctly.
ekss said:
can i just unplugged it directly without disconnecting it? i mean just like the usb flash drive before you can unplugged it you have to do a safely remove hardware operation first. and also like the xda II mini there's an option or a button when you want to disconnect it or stop the sync from the pc.
i hope, i explained it correctly.
Click to expand...
Click to collapse
Yes there is no real danger when "hot unplugging" your phone. It's more stable than most flash drives or external HDDs. As an option, you could always shut down your computer first.
thank you very much
Sorry for the ultra bump, I didn't want to start a new thread, but this doesn't help me. Whenever I hot unplug my phone, all the USBs stop responding and I can't plug anything back in, without rebooting first. I'm using a Diamond, but this shouldn't be a problem, since it's AS that messes up.
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Settings - Connection - USB to PC - uncheck 'enable advanced network functionality'
All that was there is ' Enable faster data synchronization '
No advanced network functionality. Im on Telstra NextG Network Australia with there crappy stock rom if that helps.
I'm looking at a stock Touch HD and you're right- they changed the name of the box. So uncheck 'enable faster data synchronization'.
I did but it is still not working.
I have also done a hard reset and restore to manufacturers default and still not working.
What kind of PC are you using? Is it XP? If so you need to download ActiveSync.
Using XP.. I have downloaded and installed Activesync. It used to be picked up on every pc and suddenly now it doesnt.
Opened Activesync ports in your firewall settings?
Yeah its all fine, its as though the PC doesnt even recognise it. Doesnt show up in Disk Management.
hi lucky
you're already the 3rd one with this problem.
if you plug-in the usb connector, is there a dialog popping up on your hd which let's you choose between synch or hd mode?
if not, welcome to the group of disapointed htc owners.
there is already a thread somewhere about this problem. i have exactly the same, but no one could help me until now.
at least i found a way to flash a rom. the usb connection was working for about 20 minutes. afterwards it broke down again...
try the following:
1. shut down hd
2. remove SD and Sim Card
3. plug in the usb cable
4. do a hard reset by holding vol up and vol down while you press the power button
5. confirm the hardware reset
6. when the hd is booting up again, it will do some kind of customization process. during this process active sync should come up on your pc. cancel the device setup in acive sync and wait until your hd is completely configured.
7. afterwards reconnect the usb cable and active sync should work for a while...
let me know if it helped. i'm still searching for a permanent solution for this problem...
Nope, didnt work at all.
Not even the choice to decide what I want to do pops up on the phone.
Do you think it could be a hardware fault?
I think it is a hardware fault because i did a SPL boot and instead of 'USB' showing in the white box "Serial" did.
It just seems wierd because it was working fine for 2 weeks and then it all the sudden stopped and I did no ROM flashing or anything.
Should I try reflashing my device through the SD card and see how I go from there?
did you try a different cable???
I have about 20 different USB -> mini USB and only about 2/3 of them work with phones !!!
Yeah ive tried all different cables, ive tried ones that work with my diamond but still dosent work with my hd.
luckyluke1137 said:
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Click to expand...
Click to collapse
Are you getting anything popping up in device manager when you plug it in, in other words does the list refresh like it has detected a new hardware device or is it completely silent? I have seen it a couple of times where a device gets stuck as being recognized as something else. If the list does scroll (responds to the HD being plugged in) do a screen shot of everything in DM then plug the HD in and compare the lists to see if it is showing up as something else. If so, delete the device then unplug and plug in the HD again and have it reinstall the driver.
Good luck,
Gordo
I did what you said Gordo, and it doesnt show up inDevice Manager. Its as though its not even plugged in but for some reason it still recharges off the USB.
I guess about the only other thing I can think of is to plug it in on another PC and see if that computer tries to load a driver. If it does then it is something strange with your computer. If it doesn't then there is something bad with the USB port on the HD (maybe).
Gordo
Yeah I tried that but still nothing, im sending it back to Telstra, since its within 14 days of me getting it I get a whole brand new one!
thanks for your help guys
Hello guys and gals. I messed up the phone again, but this time hard reset is not an option so I need a way to fix it. I installed the activesync killer (I believe that app caused my problems) from here:
http://forum.xda-developers.com/showthread.php?t=386948
At first i thought it worked fine, but then every time i disconnected my phone from the PC the phone froze. I uninstalled it, but the problem was still there.
Today it got even worse. I cannot connect to my PC neither via activesync nor using the x1 as a flash drive. !!!!!!
Has anyone of you encountered such a problem and is there a way to fix this without hard resetting the device. Maybe a way to reinstall the async on the Xperia?
Help pl0x???
did u try resetting it via the small button at the battery?
leobox1 said:
did u try resetting it via the small button at the battery?
Click to expand...
Click to collapse
That is a restart of the phone. A soft-reset. I do it 10 times a day .
Anyone?
(hidden bump)
Ok, i got some development with it. I reinstalled wktask and the freezing is gone. Now the only problem left is that i cannot connect neither with the activesync (the phones says connecting forever), nor with the microSD (the PC says invalid location drive:I). I'm pretty sure i messed up some drivers. Is there a way to reinstall the connectivity drivers?
Hi,
I broke my LCD display a couple of months ago still, I managed to use the phone with the epaper display and eventually reinstall it without clearly writing down the exact procedure (with Lolipop)
Today, as my Marshmallow update freezed, I had to wipe all, thinking well I could easily find the steps to start the phone again.
The only problem remains that Setup Wizard wants us to use the LCD display, and I can't.
The last time I managed to use screen mirroring on Windows, with androidscreencast-0_3_1.jnlp, which is dicontinued.
To that extend, I allowed USB debugging (three lines to add) on system/build.prop and default.prop and copied a file from my computer (adbkeys.pub) to a certain folder in the device, to allow my PC to operate on the cellphone
But that last step doesn't work anymore.
I can see a dialog briefly popping up on the yotaphone, prompting me to allow the computer for debugging, but I can't click.
Droid Explorer tells me that this yotaphone is not allowed in $Vendor (or so on, I can't remember well).
So I managed to authorize the screen mirroring before, to start the phone, but I can't right now, although I found a new app, androidscreencast-0.0.10s-executable.jar.
I would have to copy adbkeys.pub to data/misc/adb/adb_keys, but as of today, that directory doesn't exist.
Can somebody please help me with that?
Thanks,
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
wicoz said:
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
Click to expand...
Click to collapse
Thank you for answering. And what do it do to plug a mouse?
I've made it : the phone starts again.
If anyone is interested, I'll tell the trick for a broken front screen like mine.
Now I'm looking forward to make an image backup of it as it is very fresh if it can save me or others !
And I need advices for that?
Hi!!!
I have the sale problem
How did you bypass the wizzard???
hi. how do you bypass setup wizard? i had mine reset due to stuck. before im using only back screen. please help!
My front screen also stopped working all of a sudden without me doing anything. I was able to use the eInk so I did a factory reset. Now however I'm stuck since I can't boot the phone without a working front screen. I was wondering if a software issue stops the front screen from working and if there is a way to check/fix it.