hi, am sorry if this has been posted but i cant seem to find the solution of my problem.
am using cingular 8125 and upgraded it to WM6.1 and activesync 4.5.
now the problem is, i can not find a disconnect button or how do i disconnect my phone from my PC.
Sry,cudn't get what you are trying to ask ? wud you elaborate a little more.
well,if you simply want to disconnect your phone,then just 'unplug' your phone from the usb cable or if you want to delete partnership with the phone,you can do it in the 'File' option of the AS.
Cheers!
can i just unplugged it directly without disconnecting it? i mean just like the usb flash drive before you can unplugged it you have to do a safely remove hardware operation first. and also like the xda II mini there's an option or a button when you want to disconnect it or stop the sync from the pc.
i hope, i explained it correctly.
ekss said:
can i just unplugged it directly without disconnecting it? i mean just like the usb flash drive before you can unplugged it you have to do a safely remove hardware operation first. and also like the xda II mini there's an option or a button when you want to disconnect it or stop the sync from the pc.
i hope, i explained it correctly.
Click to expand...
Click to collapse
Yes there is no real danger when "hot unplugging" your phone. It's more stable than most flash drives or external HDDs. As an option, you could always shut down your computer first.
thank you very much
Sorry for the ultra bump, I didn't want to start a new thread, but this doesn't help me. Whenever I hot unplug my phone, all the USBs stop responding and I can't plug anything back in, without rebooting first. I'm using a Diamond, but this shouldn't be a problem, since it's AS that messes up.
Related
Can anyone tell me how to get my JASJAR to come out of hibernation whan I apply power via the USB port? It comes out of hibernation OK if I connect it to a PC via USB for ActiveSync. I would like it to come out of hibernation when connected to a power source via USB without ActiveSync. Can do?
It'd be easy enough to write an app that installs a notifcation for the power on event. Then plug in usb will cause the app to power on the phone. That's similar to how activesync works. Try playing with your notification queue using MemMaid etc.
V
vijay555 said:
It'd be easy enough to write an app ....V
Click to expand...
Click to collapse
It is probably quite easy for some, but I am not one of them unfortunately. I was hoping sombody has already jumped that hurdle. Perhaps it is time to learn about the vagaries of WM5 ...
i was running the 2.31 version of the rom updater utility by coke man to install a 6.1 rom. It didnt get past the 0% on the installation screen when it told me i had an update error and a soft reset would fix it. it didnt fix it and did the same thing next time. now my phone wont connect with the pc or with activesync so im pretty frustrated right now. it charges it via usb but my pc cannot find the phone device itself. also when i plug the phone into the usb cord, i hear a messed up connection sound. you know when you plug in a usb cord to a pc you hear that "do do" with the second "do" at a slightly higher pitch? when i plug mine in now it sounds like it plays the first "do" twice and then nothing happens if that at all makes sense...
assassination said:
i was running the 2.31 version of the rom updater utility by coke man to install a 6.1 rom. It didnt get past the 0% on the installation screen when it told me i had an update error and a soft reset would fix it. it didnt fix it and did the same thing next time. now my phone wont connect with the pc or with activesync so im pretty frustrated right now. it charges it via usb but my pc cannot find the phone device itself. also when i plug the phone into the usb cord, i hear a messed up connection sound. you know when you plug in a usb cord to a pc you hear that "do do" with the second "do" at a slightly higher pitch? when i plug mine in now it sounds like it plays the first "do" twice and then nothing happens if that at all makes sense...
Click to expand...
Click to collapse
1) Can you get back to the boot loader screen. Push power/Camera and reset at the same time.
2) If you can get the bootloader screen what does it say? If it says 2.31 then leave it as is and load whatever rom you want.
3) If it doesn'r say 2.31 then re run icecokemans unlocker again
i cant even establish a connection to do that with the pc. Each time i tried the program before it stopped working, it would stay on 0 with an error code that said a soft reset would fix the problem. But it wouldnt and would get stuck at the same place next time
The sound you're hearing is a driver installation error, maybe start by reinstalling active-sync?
or at least open device manager and see if "Generic RNDIS" is there, that would mean you dont have neccecary drivers and need to download ActiveSync for XP or Windows Mobile Device Center for Vista.
hope that help
reinstallin it fixed it. i really do appreciate the help though. i got the answer i needed within the day i asked where as i still have no helpful responses at any of the other places i asked. thanks
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Settings - Connection - USB to PC - uncheck 'enable advanced network functionality'
All that was there is ' Enable faster data synchronization '
No advanced network functionality. Im on Telstra NextG Network Australia with there crappy stock rom if that helps.
I'm looking at a stock Touch HD and you're right- they changed the name of the box. So uncheck 'enable faster data synchronization'.
I did but it is still not working.
I have also done a hard reset and restore to manufacturers default and still not working.
What kind of PC are you using? Is it XP? If so you need to download ActiveSync.
Using XP.. I have downloaded and installed Activesync. It used to be picked up on every pc and suddenly now it doesnt.
Opened Activesync ports in your firewall settings?
Yeah its all fine, its as though the PC doesnt even recognise it. Doesnt show up in Disk Management.
hi lucky
you're already the 3rd one with this problem.
if you plug-in the usb connector, is there a dialog popping up on your hd which let's you choose between synch or hd mode?
if not, welcome to the group of disapointed htc owners.
there is already a thread somewhere about this problem. i have exactly the same, but no one could help me until now.
at least i found a way to flash a rom. the usb connection was working for about 20 minutes. afterwards it broke down again...
try the following:
1. shut down hd
2. remove SD and Sim Card
3. plug in the usb cable
4. do a hard reset by holding vol up and vol down while you press the power button
5. confirm the hardware reset
6. when the hd is booting up again, it will do some kind of customization process. during this process active sync should come up on your pc. cancel the device setup in acive sync and wait until your hd is completely configured.
7. afterwards reconnect the usb cable and active sync should work for a while...
let me know if it helped. i'm still searching for a permanent solution for this problem...
Nope, didnt work at all.
Not even the choice to decide what I want to do pops up on the phone.
Do you think it could be a hardware fault?
I think it is a hardware fault because i did a SPL boot and instead of 'USB' showing in the white box "Serial" did.
It just seems wierd because it was working fine for 2 weeks and then it all the sudden stopped and I did no ROM flashing or anything.
Should I try reflashing my device through the SD card and see how I go from there?
did you try a different cable???
I have about 20 different USB -> mini USB and only about 2/3 of them work with phones !!!
Yeah ive tried all different cables, ive tried ones that work with my diamond but still dosent work with my hd.
luckyluke1137 said:
Hi Guys, hopefully someone can help me here it is driving me crazy - well, here is my issue.
Doesnt matter what PC I plug my HD into it doesnt get picked up, i looked in device manager and still nothing. Its like its not connected, but it shows on the phone that it is charging. And does charge.
Can someone please help?
Thanks!
Click to expand...
Click to collapse
Are you getting anything popping up in device manager when you plug it in, in other words does the list refresh like it has detected a new hardware device or is it completely silent? I have seen it a couple of times where a device gets stuck as being recognized as something else. If the list does scroll (responds to the HD being plugged in) do a screen shot of everything in DM then plug the HD in and compare the lists to see if it is showing up as something else. If so, delete the device then unplug and plug in the HD again and have it reinstall the driver.
Good luck,
Gordo
I did what you said Gordo, and it doesnt show up inDevice Manager. Its as though its not even plugged in but for some reason it still recharges off the USB.
I guess about the only other thing I can think of is to plug it in on another PC and see if that computer tries to load a driver. If it does then it is something strange with your computer. If it doesn't then there is something bad with the USB port on the HD (maybe).
Gordo
Yeah I tried that but still nothing, im sending it back to Telstra, since its within 14 days of me getting it I get a whole brand new one!
thanks for your help guys
Hello guys and gals. I messed up the phone again, but this time hard reset is not an option so I need a way to fix it. I installed the activesync killer (I believe that app caused my problems) from here:
http://forum.xda-developers.com/showthread.php?t=386948
At first i thought it worked fine, but then every time i disconnected my phone from the PC the phone froze. I uninstalled it, but the problem was still there.
Today it got even worse. I cannot connect to my PC neither via activesync nor using the x1 as a flash drive. !!!!!!
Has anyone of you encountered such a problem and is there a way to fix this without hard resetting the device. Maybe a way to reinstall the async on the Xperia?
Help pl0x???
did u try resetting it via the small button at the battery?
leobox1 said:
did u try resetting it via the small button at the battery?
Click to expand...
Click to collapse
That is a restart of the phone. A soft-reset. I do it 10 times a day .
Anyone?
(hidden bump)
Ok, i got some development with it. I reinstalled wktask and the freezing is gone. Now the only problem left is that i cannot connect neither with the activesync (the phones says connecting forever), nor with the microSD (the PC says invalid location drive:I). I'm pretty sure i messed up some drivers. Is there a way to reinstall the connectivity drivers?
Someone please help i tried to install cyanogenmod on my xperia play and i followed all the instructions on cyanogenmod website and now when i have flashed it to reboot it wont turn on anymore please someone help i beg you smart people!!! Please! I know i sound like a total noob, but i need help! I cant even connect my phone with usb to my computer, i connect the usb and nothing happens! Please someone help me please!!!!!!
can you get to the recovery?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Shinubi said:
Someone please help i tried to install cyanogenmod on my xperia play and i followed all the instructions on cyanogenmod website and now when i have flashed it to reboot it wont turn on anymore please someone help i beg you smart people!!! Please! I know i sound like a total noob, but i need help! I cant even connect my phone with usb to my computer, i connect the usb and nothing happens! Please someone help me please!!!!!!
Click to expand...
Click to collapse
have you try fastboot?does the led turns blue? or flashmode? if not then maybe your phone was hard brick..
kelvin99 said:
have you try fastboot?does the led turns blue? or flashmode? if not then maybe your phone was hard brick..
Click to expand...
Click to collapse
I've had a lot of tablets doings stuff like this, my company uses them as "thin clients" so we mod them heavily. Try this:
1, Do a battery pull
2. Power on the phone, keep holding the power button
3. Listen closely to any kind of pop / click (caused by phone being switched off, this creates a power spike sometimes leaking onto speaker)
4. Connect to pc via usb
5. See if there's ANY activity on usb (in windows via device management)
6. Try to get into fastboot / restore RUU
Because of a modified kernel or rom the display driver might have gone pear shaped, this makes devices appear bricked.
Hope this helps, good luck
Please read
84Guzz said:
I've had a lot of tablets doings stuff like this, my company uses them as "thin clients" so we mod them heavily. Try this:
1, Do a battery pull
2. Power on the phone, keep holding the power button
3. Listen closely to any kind of pop / click (caused by phone being switched off, this creates a power spike sometimes leaking onto speaker)
4. Connect to pc via usb
5. See if there's ANY activity on usb (in windows via device management)
6. Try to get into fastboot / restore RUU
Because of a modified kernel or rom the display driver might have gone pear shaped, this makes devices appear bricked.
Hope this helps, good luck
Click to expand...
Click to collapse
Well I tried to pull out and in the battery and I kept holding the power off button( i feel a vibration, but nothing happens). When i connect the phone my computer it says USB device not recognized or stuff like that, i cant connect it to fastboot.
Nice news
84Guzz said:
I've had a lot of tablets doings stuff like this, my company uses them as "thin clients" so we mod them heavily. Try this:
1, Do a battery pull
2. Power on the phone, keep holding the power button
3. Listen closely to any kind of pop / click (caused by phone being switched off, this creates a power spike sometimes leaking onto speaker)
4. Connect to pc via usb
5. See if there's ANY activity on usb (in windows via device management)
6. Try to get into fastboot / restore RUU
Because of a modified kernel or rom the display driver might have gone pear shaped, this makes devices appear bricked.
Hope this helps, good luck
Click to expand...
Click to collapse
OK, so i succeded to plug in the phone into fastboot, but i still cant access my sdcard and that, its still says USB device not recognizable, but the LED is blue so its in fastboot, can someone tell me what to do now?