I've noticed that it takes quite awhile to Boot up the X1. Is there anyway to possibly speed it up, cause it takes about a minute or longer even after I've done turbospeed and other performance tweaks.
Thanks, I use advance config and noticed something about splash screen settings, will playing around with those make a difference?
Also, yes I did use the search function and the thread's question wasn't really answered, thanks!
do you use original ROM? if yes the original ROM is quite slow... ^^
One minute is quite normal for a Windows Mobile. It's even quicker than many other Windows Mobiles I had in my hands.
I only ever shut down the phone if i need to softreset it because it have goon
crazy on me
and yes it takes a long time
but only reason i can see to really turn it off is if i softreset
or have to made do without being able to charge it for a while
and only have to start it up to call once in awhile
but mind you booting it up require pretty much power
so using the wall charger or a usb cable is better if you
have access to any of those options
Haha, yeah I'm running a Generic UK R2 rom, it's a bit of an improvement over R1, but I'm guessing that cooked roms will run even bette. I guess I don't turn it off too often, but most of the time it is soft resetting.
At worst, it took *two and a half* minutes (yes, you heard right) to boot up my phone! I did however have both the PIN code on and a phone lock key, but still...
the boot time is normal... like what the bro said, we usually dont reboot our winmos often..
MapleDouglas said:
At worst, it took *two and a half* minutes (yes, you heard right) to boot up my phone! I did however have both the PIN code on and a phone lock key, but still...
Click to expand...
Click to collapse
Hm, where is the phone lock when starting up? I did not find anything like on my symbian where one has to put in a 'phone lock code' if there is a new sim inserted.
I know there is a "phone lock" but this does not apply when someone changed the sim and starts the phone.
Is there such a setting 'phone lock code when sim changed' at all?
X1i Boot- Up Times
hi all,
I noticed the boot up time was quite slow, until i updated the ROM.
Then i came accross a program called SK Tools, this has noticably sped up my phone considerably. Just do a search for SK tools in this forum and you should find it.
Hope i helped...
gundamboy said:
about splash screen settings, will playing around with those make a difference?
Click to expand...
Click to collapse
Probably yeah.
I recently added back the Xperia animation screen on 'Jack 2.1 lite rom' during boot-which added about 10 seconds to the boot time so you can probably remove that
Yup, I removed the bootsplash of the Xperia animation and it cut down bootup by a bit. I was wondering about the wait time for the WM splash screen though, it's default at 30 seconds..
for the bootsplash, how ui remove it?
for the sktoolls, what settings did u use
SK Tools Instructions
Launch SK Tools
Look for the Optimize Button
It will automatically select 3 Tick Boxes for you
select Action at the botton Left of the screen
Make sure performance is selected and click optimise.
Sometimes it soft resets, sometimes t doesnt.
then launch auto clean within SK Tools
You should notice a difference in the boot times... I DiD
I actually used Advanced Config Tool(Just Google and you will find it) to remove that "XPERIA" boot splash. Once you've installed it, run it, then go into the icon list that says HTC Animation, and disable it. I was curious if anyone's tried changing the Splash Screen settings where it says "MS splash screen on startup" or the MS timeout on startup.
Related
So I have been looking around the internet and on this site, and I found a few programs that lock the phone including the two programs created by vijay555 and armstrom but they just don't do what I am looking for. This is what I am looking for:
1) When I press the power button I want my phone go into sleep mode and lock
2a) When I press the power button again I want it to turn the screen back on and advance me to the screen where i just press unlock on the touch screen( not unlock on the soft keys and then to unlock on the touch screen. I would like to skip the soft key press.)
2b) Instead of the need to press the touch screen to unlock it would be great if when I hit the power key to turn back on that it allowed me to press the middle nav button(such as the lock on the palm 700 wm)
Hope someone can help! Thanks alot! I have a Cingular 8525!
well now once you hit the power button to sleep it will only leave the power button active, so you dont have to lock it before you put it to sleep.. also the latest version of battery status has an option that will lock the phone upon wake up.. now i know you are looking for something to lock it prior to sleep and unlock during wake up, but personally i think unlocking during wake up could cause issues if the phone is on your pocket.. you can also still answer calls while the phone is locked
VJDeviceLock locks on power off if required. Advancing to second stage could be done. Making device unlock on pressing enter is possible but semi-complex. I don't know if Matt is still developing, but I could update mine if required.... I'm very busy and pre-occupied, but if enough call for it I'll give it a go.
V
that would be amazing if you could look into it. I would really appreciate it!
hi, vijay555. does your device lock affect activesync synchronization? the one i tried always give out an error message, so i had to remove the program.
Don't know if it does. If it does anything at all, it should do the same as the normal device lock today screen plugin. Let me know if it does something else.
V
i have yet to find a device lock that kills activestink on the phone
shogunmark said:
i have yet to find a device lock that kills activestink on the phone
Click to expand...
Click to collapse
this one (included in the addon folder), when installed and set up, disrupts synchronization on my phone (xda2s on helmi's 3.2 rom). but i can still explore the phone via activesync.
i will try vijay555's program. thanks.
raymonds said:
this one (included in the addon folder), when installed and set up, disrupts synchronization on my phone (xda2s on helmi's 3.2 rom). but i can still explore the phone via activesync.
i will try vijay555's program. thanks.
Click to expand...
Click to collapse
ok, you are referring to the AS on the pc getting disabled... or let me state that better, when you use that app to lock your phone it halts synch between pc and phone.. thats odd.. i will pull apart that cab and see whats up with it, however im not well versed on versions earlier than WM5.. but in theory it should work the same way.. i will report back
**EDIT**
wait, im an idiot, i dont need to pull it apart to answer your question, dont know why i didnt think of this earlier, when you put your device to sleep it should kill the connection over usb (why your able to browse via AS is still beyond me). i have experienced that on all the WM5 devices i have owned farrady, wizard, hermes...
**2nd EDIT**
That cab is doing exactly that, when you activate the device lock it puts the phone into sleep mode via reg key HKLM/Software/Devicelock and the dword "SuspendAfterCheck". now with that being said there may be a reg key to also disable power save modem on the active sync connection, but im not sure if it exists for earlier versions of WM
thanks, shogunmark. btw, my unit is already on WM5... and i got lost on the 2nd EDIT, lol!
raymonds said:
thanks, shogunmark. btw, my unit is already on WM5... and i got lost on the 2nd EDIT, lol!
Click to expand...
Click to collapse
oh, i thought your particular device was wm2003 device, my bad.. that 2nd edit showed a registry setting that suspends the phone when using that app, if you have regedit you can try to play with that setting and see what happens, the HKLM is HK local machine key in the registry.. its currently at a value of 0. from this app, you could try changing it to a 1. but then again that program may overwrite that value each time its ran, but i dont think so, its worth a shot
okay so now that i have played with my phone for a couple of days i know exactly what i want now. I would really like a program that would lock my phone and then shut it off with just the simple press of the power key on the side. I have used both the programs for vijay and the other device lock and they both will lock after device awakens, but I would really like it to lock before then. If that could be possible, i could then use the device lock program to run a program when the phone wakes, i will run vijays button press to press the left soft key and then all i will have to do is press the screen to unlock, thus exactly what i need is taken care of. Hopefully everything is understadable. I am super tired right now, but i have been testing all day and wanted to update the post.
@lance18: i'm not sure if i read correctly, but maybe you could opt to have your unit power off after a certain amount of time, without using the power button
start>settings>settings>power>advanced
@shogunmark: thanks for the idea. i just realized i could have one program run after locking my unit, so i chose activesync. i now have
no more problems synchronizing
Hi, I would really appreciate anyones help with this. My brother went on holiday and left me his 02 XDA Mini S (I found out here its also called a Wizard?), and I had no problems using it for about 3 days - was just testing the various features.
I found my brothers contacts - and since its now a hand me down so I wanted to remove all these etc - I asked my brother what to do and he said do a Hard Reset. I found out in the Manual how to do it - I press the Communication Button and the voice command button and use the reset and nothing happened. I asked my brother and he said use the communication and voice button and then turn it on, that sometimes works - and it did. The screen showed:
Press Send to restore factory default...
I pressed the send button and it said it formatted. I was happy, it turned on, I did the set up - everything was working. Then at the end of the day I turned it off and in the morning I turned it on - all the screen shows now is the screen which first comes on - 02 with and underwater bubbles thing, and four lines -
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 2.21.4.1
in red.
It won't go to the next screen - which I think says windows mobile. It just stays at the first screen when I turn it on - and has these four lines
Can anyone help me please? My brother will be back from holiday soon and he will be very upset with me if he finds I ruined his phone
please please please help me - i'm not as good with technology as you guys
Jocelyn
Try and get into bootloader mode by holding down the camera button and soft resetting your device. From bootloader mode you can flash back to the factory rom that was on the phone or wizard love.
Hi
I found how to go into Bootloader mode - my phone now shows three colours. But I'm not sure how to do the rest you mentioned. Could you explain how I should do it step by step please? Sorry!
Jocelyn
He means that you download the orginal rom from your provider and flash it back onto the phone.
Ok
I have made no progress
Here's what I did (please don't laugh - I'm new at all this)
1. I downloaded the active sync software from microsoft, and also downloaded a file i searched through on the forum mentioned by peter, called Wizard Love.
2. I pressed the camera button and soft rest the wizard to go into boot mode
3. I ran active sync - it said no connection.I connected the Wizard and searched - it said that no device was found (but the computer made a sound like it always makes when USB is plugged in). Also on the phone, it showed the word USB at the bottom left of the screen.
4. I extracted the wizard love and double clicked on the file newromupdateutility_wizard_noid.exe
5. When I got to the screen about existing software on the phone it was blank in that section, but it had the option to use the new one, so I proceeded.
6. The Wizard screen switched to a bar and completed 100% within about 5 minutes. Same thing on the computer screen.
7. It shows congratulations - etc.
8. I clossed everything and shut off the computer. Disconnected the wizard and there was a picture like some love cartoon characters - and thats all.it just stayed at that screen for a long time. Finally i thot maybe i should turn it off, but the power button does not work.
9. I used the stylus and did it a soft reset - the phone still froze at the start, with a wizard love cartoon - but the 4 lines i mentioned in my first post were different - it showed different numbers. But it still stuck there.
10. I thought maybe the wizard love is not compatible with my phone? So I went to the 02 XDA mini site, and downloaded the software from there - Xda_Minis_Upgrade_v2.21.4.101. I redid the whole thing, this time with this software.
11. At the end I saw Congratulations! again, but this time the screen had gone back to 02 - and the numbers went back to what was in my original posting. But still the phone does not start - its just stuck at that 02 screen with the 4 red lines.
12. Somone help me please!!! Have I made it worse???
Jocelyn
The Love ROM should work on your phone since it it does not have IPL/SPL (AFAIKnow). However, it seems that the phone itself already have a bit of problem itself. Using the "Xda_Minis_Upgrade_v2.21.4.101" to flash the phone in bootloader mode is the wise thing to do. Probably you'll need to hardreset it again (i.e. what you've done in the very first post).
As far as I can see, you've did nothing wrong on your first post. It seems to be the phone problem. ANYWAY, you may want to note the little issues. Example, do not have the miniSD card in the phone when doing all the stuff said above.. and possible, remove the SIM as well.
Also, sometimes, it takes ages for it to boot up. I'm not sure how long you've waited, but I would say.. give it a good 5 mins to do its bootup to confirm it hanged.
Sorry
I should have mentioned - in both cases when I ran the utility, once I waited at the splash screen for more than 10 minutes and nothing happened, i just tried to do a hard reset. In both cases the words came up, press send to do a reset etc...
but when I press the left (green phone) button (i think that is the send button?) it says format failed everytime.
I searched at some other thread and followed what Zabardast_1 says about flashing and I tried that, it does not work. Is there any other option? Oh i also tried it another time, this time disabling Anti Virus first - but still no luck
Jocelyn
Hmm.. I'm sorry to tell you. Since you have a 'Format fail', you 'officially' have a bricked device. That has something to do with the hardware.. or stuff that doesnt have any thing to do with your flashing.. probably CID unlocking may cause this problem.
ANYWAY, it seems that your only choice is to get it to somewhere to have it fixed. probably you want to make it as official (i.e. use the O2 ROM) before taking it to O2 to have it fixed.
so i have been using my X1 for about 1 week now
i restarted the phone for a couple of occasion
and i used to see the Windows Mobile 6.1 loading screen just before we enter the today screen right..
usually during the Loading Screen of the WM 6.1, there shouldn't be a Start menu bar appearing right..
it should only appears when the WM 6.1 loading screen are finished and when we are on the today's screen, that is when the start menu bar appears
but idk, earlier today, i had to close my phone because the battery was low, and when i get back home, i start charging it, and then i turn my phone again.. and what i notice is that, the "start" menu now appears along with the loading screen of WM 6.1
is that normal.. or?
maybe this info will help, but i doubt it's the cause
i started using SKTools ( www.s-k-tools.com ) like around 3 days ago
and i do the Clean! and registry clean up.. never restarted my phone ever since 3 days ago.. but i dont think that is the cause for this?
i only want to think that perhaps, now my system are a bit lighter after i remove some useless junk using the SKTools, so the start menu bar loads faster.. hopefully that is the case?
but i doubt.. any help?
That is a problem? Please explain how?
yes, because if i remember correctly, the start menu never appears before on WM6.1 loading screen
im sure all of your X1 also have a full WM6.1 loading screen without a start menu bar on the top?
It is perfectly normal.
I really don't see the point in your question. Is your phone having an issue, a problem?
no.. nothing is wrong. but why was it not loaded in the WM screen before?
there must have been something to make the start menu appear faster, and i see this as not normal
that's all i wanted to know
thanks anyway for answering
TweFoju said:
no.. nothing is wrong. but why was it not loaded in the WM screen before?
there must have been something to make the start menu appear faster, and i see this as not normal
that's all i wanted to know
thanks anyway for answering
Click to expand...
Click to collapse
happens to me to - its really nothing - i think its always been there for me - i just see it as part of the boot up phase - dont worry about it
Hi,
I have owned my HTC HD2 for about 3 months now. I have had a problem since i first got it which is really bugging me. Sometimes when the phone locks, i am unable to unlock it with the slider. The slider gets to about half way across the screen and then freezes. If i leave it for a few minutes it goes back to a locked position agian and when i attempt to slide the slider across, it freezes.
The only thing which gives me access to my phone again is to perform a hard reset by removing the battery.
Any ideas? The phone is on UK Vodafone and is running the latest firmware (v.1.72)
ukznmcl said:
The only thing which gives me access to my phone again is to perform a hard reset by removing the battery.
Click to expand...
Click to collapse
I don't have an answer, its likely to be sense trying to load something and hanging.there are loads of threads about unlock problems, all different, however I wanted to help you avoid confusion by pointing out that removing the battery is a soft reset, not a hard reset.
I'd start by removing some apps, see if it changes the behavior, then re add til it happens
i've the same issue. but not removing battery, just press little red restard button uder battery cover. i think it happens when i enable rotation of today screen or because of proximatelyscreenoff program bug. after removing today from rotation of bsd tweek i have 1-2 restarts for 2 weeks.
I had the same thing sometimes, but never happened with the latest rom I am using, and I am pretty much installing the same apps over and over after each flash...
You aren't by chance running the facebook application?
Leaving that open and locking your phone will result in you not being able to unlock your phone
I wonder if this problem has anything to do with power supply; I sometimes can't unlock the screen either and a few moments ago my battery had run out and when putting it on AC I wasn't able to unlock it. When it had charged a bit there were no problems unlocking it.
dio62000 said:
I wonder if this problem has anything to do with power supply; I sometimes can't unlock the screen either and a few moments ago my battery had run out and when putting it on AC I wasn't able to unlock it. When it had charged a bit there were no problems unlocking it.
Click to expand...
Click to collapse
As I said, have you tried making sure Facebook isn't running
HD2 screen unlock probblem
Hi All,
I have put my screen unlock code as 0000 and set as 5 mins to lock the phone.
But that is becoming a headache now.
Sometime the phone behaves very unusual, it doesn't takes my code "0000", no option rather to reset the phone or remove battery and restart.
After the reset the phone works with my code (0000) but don't know when the same problem starts again.
Need Help..
Anyone solved this problem?
In the Att Tilt2 the power button was on Top & could close the Screen while talking on the phone
How do we do that in the HD2 cos its Off button is on the Red Call Shut button
Anyone
Unlock Problem
I everybody,
I have this issue aswell but even worse than everyone else. I can't unlock my device at all anymore else I do the "hold both VolUp&Down + Power Button " for reset to manufacturing settings of the cracked ROM.
any process so far or do you guys still think it's about messed up Apps?
best regards,
hanny
HD2 Hard Locked
Okay...so maybe Facebook is locking my HD2. It's LOCKED I'm recharging, I've attemted a soft restart, hard restart and every other restart out there...nothing is working. I even tried pushing the white button below the battery case and holding the volume up and down...I actually thought that it began to do a hard restart. It did begin but then it got stuck at the "swipe" demo. It is definitely stuck.
HELP!!!!
Hello,
I recently configured ActiveSync E-Mail on my HTC HD mini. Everything works fine until I power off and power on the device. The startup sequence is paused with the following text:
"Company policy has enabled device encryption. Startup is suspended. Select unlock to continue. Emergency calls: Press talk."
When I select Unlock then nothing happens (the button is pressed).
The device cannot be turned off by power off button (it only goes to sleep).
The problem is not solved by removing the battery, putting it back and powering on.
The only way to get the device working is to hard reset the device by the special sequence of keys.
Device: HTC HD mini
ROM: RUU_Photon_HTC_WWE_EastEurope_1.36.479.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe
I reproduced this problem 3 times.
I downgraded from RUU_Photon_HTC_WWE_EastEurope_1.36.479.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe to RUU_Photon_HTC_WWE_EastEurope_1.32.479.2_Radio_Signed_32.2802.05.06_0.63.05.35_Ship.exe which seemed to remove the problem. However, it appeared after several power cycles also on 1.32.
Any idea how to correct this?
I had exactly the same problem when I purchased the HD minn a few months ago. It happened 3 times in a row that I had to hard-reset and re-install for exactly the same reason (no unlock keys after start-up.) I called my corporate's IT department. They said they changed something on my MS exchange policy profile that may help. Frankly, I can't believe that this was the real root cause of the issue but ever since then it works fine. Never had this problem again for 4 months.
Sorry that I don't have a real solution for you.
CM
Thank you for you reply. May I have additional questions?
1. What ROM release do you have on your HD mini? As you had the problem a few months ago it might be 1.32, right? I have the problem on ROM 1.36 when I first time power cycled the HD mini. It survived many power cycles on ROM 1.32 until the last one which caused the problem again.
2. Is there any chance asking your corp. IT dept. about the change they did?
==
edit:
It seems that the responsible one is HTC Sense. I upgraded from ROM 1.32 to 1.36. I decided to test this with HTC Sense turned off. The problem is no longer present on 1.36 when HTC Sense is off. However, it is a workaround only. I informed HTC support and I hope they will fix it.
Same problem as the others, only I found the cause!
Everything works fine on mine (1.36) until I change the lock screen wallpaper. As soon as I change that the device hangs on the unlock screen at start-up.
If you look at the way it all works, on start-up when you are prompted to unlock, you get the standard unlock screen with the slide down option, and a background picture. I'm guessing the default picture is held in un-encrypted memory, and so it works. If you change the picture, the new picture is held in encrypted space and can't be accessed until you add your key. Only you can't because the device has crashed.
One work around may be to assign it a background picture from the SD card. But having only just got the thing to work I don't feel like trying it in case it puts me back to square one.
Update: Yes copy the image you want to SD card and then change the lock screen wallpaper to point at that. Device boots normally with the new wallpaper.
Hopefully this will help someone.
radar: Thank you for your input. The explanation sounds reasonable. I'll test it once I need to reinstall the device. I'll stick with the working status I have for now.
I am in the middle of waiting for my hard reset to complete as I type. I just had the same exact issues as you all described. I wanted to add though that the background I was using when this happened was from my storage card so I dont know if that will fix anything.
Ill try to add anything else I find out. I am going to try this one more time and then forget about my work email if the same thing happens. Or I might try to find a new rom - but I like what I have
Edit: I actually just saw that you (radar) said the image on the card worked... weird. I'm goign to try again. If I could get around this everything will be working perfectly and I'm not ready to give up.
Try disabling HTC sense. It helped me.; I am running months (done several power cycles) without the problem.