Hi, I would really appreciate anyones help with this. My brother went on holiday and left me his 02 XDA Mini S (I found out here its also called a Wizard?), and I had no problems using it for about 3 days - was just testing the various features.
I found my brothers contacts - and since its now a hand me down so I wanted to remove all these etc - I asked my brother what to do and he said do a Hard Reset. I found out in the Manual how to do it - I press the Communication Button and the voice command button and use the reset and nothing happened. I asked my brother and he said use the communication and voice button and then turn it on, that sometimes works - and it did. The screen showed:
Press Send to restore factory default...
I pressed the send button and it said it formatted. I was happy, it turned on, I did the set up - everything was working. Then at the end of the day I turned it off and in the morning I turned it on - all the screen shows now is the screen which first comes on - 02 with and underwater bubbles thing, and four lines -
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 2.21.4.1
in red.
It won't go to the next screen - which I think says windows mobile. It just stays at the first screen when I turn it on - and has these four lines
Can anyone help me please? My brother will be back from holiday soon and he will be very upset with me if he finds I ruined his phone
please please please help me - i'm not as good with technology as you guys
Jocelyn
Try and get into bootloader mode by holding down the camera button and soft resetting your device. From bootloader mode you can flash back to the factory rom that was on the phone or wizard love.
Hi
I found how to go into Bootloader mode - my phone now shows three colours. But I'm not sure how to do the rest you mentioned. Could you explain how I should do it step by step please? Sorry!
Jocelyn
He means that you download the orginal rom from your provider and flash it back onto the phone.
Ok
I have made no progress
Here's what I did (please don't laugh - I'm new at all this)
1. I downloaded the active sync software from microsoft, and also downloaded a file i searched through on the forum mentioned by peter, called Wizard Love.
2. I pressed the camera button and soft rest the wizard to go into boot mode
3. I ran active sync - it said no connection.I connected the Wizard and searched - it said that no device was found (but the computer made a sound like it always makes when USB is plugged in). Also on the phone, it showed the word USB at the bottom left of the screen.
4. I extracted the wizard love and double clicked on the file newromupdateutility_wizard_noid.exe
5. When I got to the screen about existing software on the phone it was blank in that section, but it had the option to use the new one, so I proceeded.
6. The Wizard screen switched to a bar and completed 100% within about 5 minutes. Same thing on the computer screen.
7. It shows congratulations - etc.
8. I clossed everything and shut off the computer. Disconnected the wizard and there was a picture like some love cartoon characters - and thats all.it just stayed at that screen for a long time. Finally i thot maybe i should turn it off, but the power button does not work.
9. I used the stylus and did it a soft reset - the phone still froze at the start, with a wizard love cartoon - but the 4 lines i mentioned in my first post were different - it showed different numbers. But it still stuck there.
10. I thought maybe the wizard love is not compatible with my phone? So I went to the 02 XDA mini site, and downloaded the software from there - Xda_Minis_Upgrade_v2.21.4.101. I redid the whole thing, this time with this software.
11. At the end I saw Congratulations! again, but this time the screen had gone back to 02 - and the numbers went back to what was in my original posting. But still the phone does not start - its just stuck at that 02 screen with the 4 red lines.
12. Somone help me please!!! Have I made it worse???
Jocelyn
The Love ROM should work on your phone since it it does not have IPL/SPL (AFAIKnow). However, it seems that the phone itself already have a bit of problem itself. Using the "Xda_Minis_Upgrade_v2.21.4.101" to flash the phone in bootloader mode is the wise thing to do. Probably you'll need to hardreset it again (i.e. what you've done in the very first post).
As far as I can see, you've did nothing wrong on your first post. It seems to be the phone problem. ANYWAY, you may want to note the little issues. Example, do not have the miniSD card in the phone when doing all the stuff said above.. and possible, remove the SIM as well.
Also, sometimes, it takes ages for it to boot up. I'm not sure how long you've waited, but I would say.. give it a good 5 mins to do its bootup to confirm it hanged.
Sorry
I should have mentioned - in both cases when I ran the utility, once I waited at the splash screen for more than 10 minutes and nothing happened, i just tried to do a hard reset. In both cases the words came up, press send to do a reset etc...
but when I press the left (green phone) button (i think that is the send button?) it says format failed everytime.
I searched at some other thread and followed what Zabardast_1 says about flashing and I tried that, it does not work. Is there any other option? Oh i also tried it another time, this time disabling Anti Virus first - but still no luck
Jocelyn
Hmm.. I'm sorry to tell you. Since you have a 'Format fail', you 'officially' have a bricked device. That has something to do with the hardware.. or stuff that doesnt have any thing to do with your flashing.. probably CID unlocking may cause this problem.
ANYWAY, it seems that your only choice is to get it to somewhere to have it fixed. probably you want to make it as official (i.e. use the O2 ROM) before taking it to O2 to have it fixed.
Related
ok I just got my mda out of the new box it was working fine.
I tried to update the rom, everything went well until 88% when the pc outta nowhere shut off. I dont know why it did this , my pc never turns off.
now its stuck in the RUU red green blue screen
some one plz heeeeeeeeeeelp
sometimes you can begin the update process all over again, and the rom flash will recover and complete.
Don't fret dude, all is not lost, I take it you didn't make a backup of your device to SD? Well no worries go to this thread http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard try to read up as much as you can there to make sure your not doing anything wrong, it's better to take an extra 15min reading then spending 1 hr worried about your machine. Question 2 I think applies to you:
"Q2 : What to do if the device hold at splash screen after upgrade?
A2:
- connect the device with usb cable
- hold the "voice dial" and shortly press the reset button by stylus
- release the reset button and wait for the USB color screen
- download and run the shipped ROM upgrade program (with .exe file extension) e.g. ftp://xda:[email protected]/Uploads/HTC_Wizard/Roms/
- you device will be bootable again.
- then start aWizard and run through the 'e', 'u', 'w' one by one. Of coz you have to connect your phone to ActiveSync before running the 'e' option. "
I hope your able to fix your problem bro, good luck!
Jesus, your title makes me want to hit you in the nose. Learn to spell
As for the update, I've never had a problem fixing it by doing what the poster above said. Mine was totally dead at one stage.
Ok, Ive got a new problem with my XDA Exec.
Opened it up and tryied to turn on the backlight and nothing. tried a soft reset, nothingtried a hard reset now it just sticks on the splash screen, the red writing comes up on the right and side and just hangs there forever!
Please help
You're stuck. apparently the only remedy is turning it in to repair. For most of us it is under warranty.
Just off the phone to 02. Theres sending me a new one via courier on monday. it's less than a day old.
Is this a comon fault with the Exec?
erm ... I managed to experience this problem.
I was trying to uninstall SPB GPRS thingy that comes with the O2 package, and it just wouldn't go. I ended up deleting the program files and getting an error when it started up, so I deleted the GPRSNotify file under Startup. It never worked again ...
I got the splash screen, tried soft and hard resetting and various permutations (including standing on one leg and while holding breath) ... nothing. Did try to install fresh ROM, but startup wouldn't get far enough to let PC load ROM over USB.
Ended up contacting O2 who sent me a nice shiny new one, as it was only three weeks old. This time I haven't installed GPRS monitor thingy, and I don't intend to fiddle with it again ... or at least until I've forgotten my lesson ...
Sorry i ment to give you guys an update on this. I did manage to get it working again, although i still accepted the new one the sent to me.
What i did was installed a new rom off the 02 website. at 1st the computer couldnt see the phone so wot i did was enter what i think was the programming side of the phone. i found the instructions on how to this on the net. i think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb. Double clicked on the rom file and 30mins later my phone was revived.
Funny it was the gprs monitor that i too installed before the phone screwed up? ive since installed it again on the new phone and have had no problems with it since.
trickydickyd said:
I think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb.
Click to expand...
Click to collapse
Otherwise known as Bootloader mode
Aye, thats the one.
Cheers
I have a g4 8125 and tried to flash black diamond 2.0 using shelltool. I followed all the instructions, but I may have messed something up. I installed the enablerapi and certspcs files on my phone, but i realized later that i did this after turning off my radio. After flashing I made a hard reset, and now it just comes to the cingular splash screen and shows my ipl, spl, gsm and os (which it says is 6.0.0.0) and doesn't load anything. Anyone have any ideas? It won't connect to activesync either.
edit: sorry for my ignorance, thanks for the help though!
Please refrain from posting WITHOUT using the search bar. This question has been answered more than a million times.
For starters, hold down the camera + power button whil poking at the reset button
Hello there.
This is my first post, and I hopefully pray that I don´t get a "Please Do a search" kind of answer as I have been doing a hard search through the forum but haven´t found what I´m looking for. Probably I´m just using the wrong search terms but english is not my native language so I´m not sure how to look up for this issue.
First, I unlocked the sim of my device by sending it to a third party. Afther that, the phone came with a Wizard-Love OS installed, and finally I got excited and started to mess around with the Shelltool to get the device upgraded to WM6. (It´s a G4 by the way).
First I successfully upgraded to wm6 wee htc wizard v5.2.660, but then I found that the keyboard mapping was all wrong with the shown special characters (they weren´t where they were supposed to be at all), so i tried messing up with the registry trying to select a local language for spanish with no success at all....
Also I was having some issues trying to connect to internet via wi-fi even when I did get connected to the network, but did not test it hard enough.
Then I went farther trying to "shelltool" a Black Diamond 2.0 Touch rom, but then everything became a real mess... The Shelltool said that it was finish only like 4 to 5 minutes after starting so I disconected and Hard Reseted the unit. Don´t remember if I disabled the radio before flashing it, nor if I had the sd card installed on the device at the flashing momment, but definetly i had reinstalled the cert_spcs and EnableRapi cabs prior to this seccond attempt.
After the hard reset, it started but freezed on the first screen showing the ipl, spl, gsm and os (which it says is 6.0.0.0). Then I hard reset like two more times, with no luck. Then I entered on the bootloader mode, but after trying that for a while the phone stopped responding. It did not turn off, so I removed the battery. Then when I put the battery back the unit did not turn on at all. Even it did not show the charging red light when I connected it to the usb nor the wall ac adapter. I was devastated... I leaved the unit with the battery out all the night and the next day I reinstalled the battery to see that the device did turn on and did charge, but still it was locked on the splash window.
I tryed to reflash the unit using the bootloader under windows xp, after killing the activesync connection and using the wizard_Love_2.26.10.2_WEE_Novii_CF2 rom. The unit showed a progress bar so the pc and after 10-12 minutes it was done. I Hard reseted the unit but then it always started on the bootloader screen as if I was pressing the camera button.
Hard reseted, soft reseted, battery out and in, no luck. Then it went dead again. It did not turn on at all and no charging light. Once again i leaved the unit all day without battery and send it to the friend that had unlocked the sim for me. He just called me and told me that the unit was now up and running again with wizard_love rom. I´m really not sure how he did it. Probably i did something with the sd inserted when it was supposed to be out. I did flashed the wizard love on bootloader with the sd inserted but i´m not sure if that could have make the mess.
I would like to know if anyone have had this kind of lock up and how to deal with it (how much time to leave the battery out, etc). Also I will love to know how did my friend (he wont tell me as is it´s bussines and he charges for it) finally restarted my unit flashing wizard_love again, as I´m still too curious to not try to flash my unit again and probably be on the same mess once again.
Thanks in advance.
That's a lovely 1st post. If every one is to be like that.. it would be just to nice to help others.
Anyway, this may not sound logical, but I get problems with Shelltools when I do not have the official ROM flashed before another flash. What I would suggest is that, you ought to have an official ROM (check Wiki to download your official ROM flashing EXE), which seems to get me out of trouble a few times.
Also, it maybe wise to check your battery before any flashing attempt, make sure it is 100% (60% will do mostly, but in case of an emergency, that 40% helps). It cases where a phone doesn't go charge/bootloader, it is battery problem. The overnight thingy that you've done, probably rest the battery long enough to boost it to a charge (e.g. how you get a blink when you switch off a torchlight for period of time on a low batt).
Good also among your information, tell us the IPL/SPL/Radio on the ROM you are using.
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
Hello everyone. After some researching, this seemed like the best site to answer my question, as I have not found an answer yet.
Yesterday morning, I was running my ATT 8525 (which I believe you refer to as "hermes") just fine. I was using the internet sharing feature, and went to reset the phone. I "believe" I pressed the power button while pressing the "ptt- push to talk" - button. The phone turned off, and when I turned the phone back on, rather than loading like it normally did, I got a new screen.
The screen has 4 color bars. A red bar at the top, then a green bar, then a blue bar, and last, a white bar of color on the bottom. Each bar takes up 1/4 of the screen and runs horizontally. At the top, the phone says, in white text:
HERM100
1PL-1.04
HERM100
SPL-2.03
At the bottom of the screen, in the white bar of color, in black text, it says
SERIAL
Now, when I press the power button to turn the phone off, nothing happens. I have to remove the battery to shut off the power. If I plug in a USB cable, the SERIAL text changes to USB. If I press the top two buttons, the one above window and the one above ok, while pressing the stick in to reset the phone, that screen works ok. I believe it is called a "hard reset" It asks if I want to erase all data and restore factory settings, and if so, press r. I press R on the keyboard, and the screen then says reset complete, press space. I press space and then I am back to the screen with 4 color bars. Nothing else I have tried works either. I have been stuck on this screen with 4 color bars since yesterday.
I took my cell phone in to ATT to be looked at and the sales people at the store say that I am 7 days past my warranty, and that they can't/won't repair the phone, but they would be happy to sell me a brand new one... for several hundred dollars.
So, the folks on the internet are my last hope =( If anyone reading this knows anything, even if it is a link to another site or something, that may help me resolve this problem, I would greatly appreciate it. If not, I at least thank you for your time reading my post.
- Wormling
Oh, as an additional thought, if it helps, I have not used any of these :baked: roms or any such thing. I bought my phone and used it as is. The one and only change I ever did to my phone was I followed ATT's steps on upgrading from Windows Mobile 5 to Windows Mobile 6, if I remember their names correctly. Hope this helps.
Bootloader. This is the name of the screen according to my research.
"Is your device able to boot Windows Mobile OS?
This one is easy: If can you see your today screen and use your phone as a PDA means you can boot OS. If you only see the splash screen, bootloader screen (tri-color) or windows mobile splash screen you can't boot OS."
Got this from the thread at
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
So, I guess I am stuck at the bootloader screen.
Try a Hard reset - hold both soft keys and reset with stylus. Hold in until it asks to reset to factory (whatever). Press "r" on the slideout keyboard and then space. You should go back throught the setup PPC steps.
YOU WILL LOOSE ALL INFORMATION ON YOUR HERMES...This is unescapable as you would any other way you tried to recover your Hermes too.
I suggest if you get it working to install Hard SPL V7 (makes recovery easier) and also pim backup so you can restore all your contacts/messages if something goes wrong again.
Cheers... & good luck.
I have tried hard resetting many times, and it does not work. It says that it succeeds and that factory settings have been restored, and then I am back to the bootloader screen. I have been to the wiki on bricked hermes phones and recovering from a brick. From that, I ascertain I have a type 2 bricked phone (goes directly to bootloader screen). I tried the MTTY tool, and it says that the NAND write was successful on both commands, but, I am still stuck at bootloader screen. I have since tried installing a few different roms, even in SSLL and HARDSPL modes, and nothing has worked.
What I have not tried is the JPIN fix, as I am not an engineer and don't have the tools or knowledge on how to do that. I also don't know how to do the microsoft operating system download fix (using an emulator?)
** UPDATE **
I think it might have been the mtty commands, but I took the battery out overnight, and when I put the battery back in to try the KITL attempt, the phone booted up and started to do the config. I was happy and thought that the phone was fixed, but when it was done with the configurating the phone, it reset back into boot loader screen -_-
You may need to check for bad blocks. This sometimes causes the problems you descibe as well as spontaneous Hard Resets and occasional soft resets.
Do a search for "how to fix bad blocks hermes" and you should get the info you need...
Hope this helps...