Database Users

Disable Mic on Magician?

hey guys anyone know how to disable the mic on the device when using a bt handsfree, when not in a call? thanks in advance

anyone???

heloooooo

#1: Don't bump your thread three times in one day, it pisses people off, and you won't get any help.
#2: Why would you want to disable it if you're not in a call anyway?[/list]

this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me

no u st**pid f**k!!! read the other thread before opening a new thread!!!

neckarb said:
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
Click to expand...
Click to collapse
thats bcoz we don't support lazy a** like u! read the project VCABT its absolutely clear there!!

i have read it and found no mention of disabling the mic. thanks for the help though, real usefull.

so i still havent got an answer then?

i use a BT headset and its not even connected when not in a call.. only when i make a call or recieve a call does the phone connect to the headset... so i dont know what your askin for.. sorry

i am asking the fantastically simple question, how do you turn the microphone on an imate JAM OFFFFFFFF!

neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay

neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
Click to expand...
Click to collapse
thank you so much mate your the first one with a straight answer, thank you again.

The microphone's not active if you're not in a call anyway. The only possible reason you'd need to turn the mic off is if you're in a call (there's a mute options for it), or if you were recording, in which case, stop recording. Please FOAD, and stop treating people as if they were put on earth to answer your pointless pathetic questions!

its because im using bt ms voice command, which leaves the mic on the magician on while im using the headset for voice command.

Nokia bluetooth headset with PPC-How to run

Hi friends I am using ORange SPV3100 device[Hermes] I got a nokia bluetooth headset, but I could not able to use it as my device couldn't able to find it. I dont know what things I need to do to get this accessory work for me. I am helpless as there is no guide available for this problem. My Device supports BT 2.0 with A2DP. Which company headset works best with this phone & anything more. Thanx
Saksham Katyal

You might wanna post this in the HERMES ACCESSORIES forum?

Junner2003 said:
You might wanna post this in the HERMES ACCESSORIES forum?
Click to expand...
Click to collapse
Sorry in a hurry I forget to put it in a right place. I did search & found most of similar queries posted here. Any moderator can do that for me. Any solution about my problem?

Usually you have to set the bluetoon headset device to pairing mode, then you phone can find it.
how to do that will very from device to device. You need the manual or call Nokia about it.
If you already did that double check to make sure you did it right. If that not it, I dought any of us are going to know how to fix it. Return/excannge get a different device.
Good luck...

Dialer / Bluetooth Question

Greetings.
This is my first post to this forum section. I'm more of a Windows/web developer who's just beginning to get his feet wet with WM development - I've written a process manager and a "kill task" command line tool so far.
I own a 8125 (Wizard), and I've had a blast customizing it. I'm currently running the latest release of TNT's WM6 ROM and quite content. However, I do have one issue that I have not been able to resolve.
When using a Bluetooth headset, most audio is redirected to the headset as expected. However, when I invoke a call via VoiceCommand, the dialer still outputs the dial tones to the internal speaker. This can be annoying when in a crowd.
Has anyone come across this issue? Does anyone have a solution? I've considered trying one of the dialers posted under the HTC thread, but I thought it might be wise to consult with experienced devs.
Thanks much,
W James
P.S. I originally posted this question under the Wizard WM6 section. Unfortunately, no one was able to offer a solution. Sorry about the cross posting. Hopefully someone can provide some suggestions here.

bluetooth stereo g3 wizard

Hi guys, is it possible to have bluetooth stereo on my wizard. Is there maybe a particular rom i must load.

Can any1 help me with this.

Doesnt anybody have any information on this topic.

Dude. Patience.
This site is analogous to a bulletin board, not to a chat room. Sometimes, it takes days before someone with the right answer to your question reads your post. Sometimes, it never happens....and you will almost always find answers if you run a search. You certainly aren't the first person to try upgrading the bluetooth on a Wizard.
To answer you, Yes. There are several options available, ranging from difficult (manual editing of your registry) to easy (load a .cab file or two) to way overdoing it (loading an entire ROM just to get BT stereo) with varying degrees of popularity and success throughout the user population.
I have heard this works on some Wizards:
http://forum.xda-developers.com/showthread.php?t=263745
When I was using WM5 only, I used this successfully:
http://forum.xda-developers.com/showpost.php?p=931212&postcount=1
If you're in love with the idea of flashing an entire ROM for more reasons than just stereo bluetooth, do some reading first, and make sure the ROM you want has "A2DP" capabilities, or you'll be right back here looking at my suggestions again.
Welcome to XDA, and please don't forget to search before asking questions. You'll often save yourself a lot of time and frustration.

edge200is said:
Hi guys, is it possible to have bluetooth stereo on my wizard. Is there maybe a particular rom i must load.
Click to expand...
Click to collapse
BLuetooth stereo is built into the Wizard, with the standard ROM, at least on my T-Mobile (USA) MDA
You just need a BT stereo headset.

Thanks Myrddin Wyllt for the welcome.
Sorry about my impatience i would just like to say what a gr8 forum and you guys are doing amazing work. Been spending hours reading all the post and I hate reading so this is definitely good stuff.
Thanks

Help needed on these 2 issues and then I'm happy

So far, love the phone but I have two issues that I'm wondering if someone can help.
1) On some system screens, for example, when pairing a bluetooth and select "add new device", the right edge of the screen is cut off when in portrait mode. It seems like the length of the screen has fooled the x1 into thinking that the right edge should be wider and so the resolution isn't supported. Any tips on this issue?
2) When pairing a bluetooth device, sometimes either I get a "bluetooth hardware problem" message or the pairing code seems to be incorrect, although of course its always 0000 for all my bt devices. Should I take the phone back or is this happen for all devices currently?
i have the HK xperia which is I think the UK Generic ROM and no updates are at SE's site.
Thanks for any help
Best
Ken

please search and read,
a you'll find an answer
b you'll find the uk v2 rom

fards said:
please search and read,
a you'll find an answer
b you'll find the uk v2 rom
Click to expand...
Click to collapse
I am affraid your answer will not suffice him:
I guess he thinks this is a hotline and he wants answers
Maybe he doesn't want to search or read even when his specific questions have been answered and discussed before (and more than once)