Hi
my microswitch( the switch near the simcard) was damaged and nowmy divice not charging, how can i repairthat?
Or there is any way to make a chargr for battery?
Related
Hi all,
Need som urgent help. The backcover of my device is not fitting well any longer. Guess I´ve bumped it to many times...
As a result (Iguess) I cant turn on or even charge my magician!
The only thing that is happening when I try to charge is that a red light is turned on. What does this mean?
Any solution of how to get it work again?
Is it possible to buy a new back-cover? Live in Sweden.
Thankful for some ideas!
Regards Emil
Most probably the notch on the battery cover that hits the microswitch lever has broken. You will find the microswitch on the lower-right corner of the device when facing down. Put something soft but strong enough (ie. foam) to keep the microswitch in the ON postion then mount the battery cover and temporarily fix it with tape. Be sure to keep your device plugged in via USB or charger in order not to totally discharge the backup battery. If the backup battery gets depleated, then it's like doing a hard reset.
You can buy parts from ebay but I've always bought from Brando and is very reliable dealer (shop.brando.com.hk). Delivery is quite fast too.
Hi Zerimar and thanks for your answer!
Unfortunately that didn´t do the trick. Still the same red light when trying to charge. And I can´t turn it on! I am pretty sure that the battery is flat out by now but even so I would think it would load and then after a while, I would be able to turn it on.
Am really frustrated abt this!
Any more ideas maybe?!?
Regards Emil
u'd better send it to service...
BoomerCE said:
u'd better send it to service...
Click to expand...
Click to collapse
Well, that´s what I´m trying to get around... Thats why I´m hanging around here
If have have my device charged via USB or charger, the LED becomes as soon as I remove the battery cover. If I hit the microswitch lever then the LED turns green and start to boot up. If main battery is removed the LED stays red even though hitting the microswitch's lever.
It looks like it's not charging your main battery or your battery is already defective. If your device is over a year old and you're still using the same battery, then its time to change it. Bulges in a battery is a sign that it needs replacement.
Before sending your device for repair, why not look for someone you know who also has a Magician or equivalent device and quickly borrow his/her battery?
I had red LED when plugging into a main charger - and then the phone reset.
Red LED + loop booting-poweroff = dead battery
If the LED is RED when you charge your device for hours
If the device tries to boot sometimes, but powers off by itself some minutes after (it means, at least, that your device CAN boot! )
Your battery may be dead, I bought a new one for 10Euros on ebay...
Those batteries are perfectly compatible with HTC Prophet or HTC Beetles (Ipaq 6515) and maybe other devices... easy to find!
hi! i have a dopod 838 pro. and it suddenly cant turn on. i was just texting then it went buggy (hanging up) then i did a soft reset then all of a sudden it didnt turn on. i was charging it at that time.
the phone never got wet, was never dropped. i installed the official wm 6.1 rom and it had been running for more than two weeks so i dont think the problem was the ROM. battery is good since i still get two days of battery.
i have tried hard resets, used the usb connector to power the phone up. havent tried another battery though. is there any way i can diagnose the problem before spending for diagnostics in the shop?
this was an observation: when i remove the battery and connect it to the charger, LED is red then it disappears when i replace the battery. no amber going. how do i test if the problem is in the battery? battery connector? power? or (please i pray not) the motherboard itself?
a little help please! more power to this forum. thanks!
gab
Would suspect the battery... Red LED WOULDN'T turn on if this was a hardware problem, broken battery connectors and such. However, if you install the battery when the red LED is visible (connected to charger without battery) & it doesn't turn amber (charging) then I'd suspect the battery has died.
Take in to a shop and ask to try a battery, easier if you know someone with the same phone.
Cheers...
i have it sent to the authorized htc center here in our area. the technician tried using another battery but still it didnt work. my phone will be left at the shop for about 4 to 5 days for diagnostics. the technician said that theres a possibility that this may be a motherboad problem like the board short circuited.
but how come? how can this happen?
can anyon confirm that this is a motherboard problem? awh! cant wait for the result of the diagnostics.
thanks!
hello
my phone is dead after dropping it in water.
i dont know how to test what is faulty here.
phone not turning on and no display even after putting charger except a red led when i connect charger
is it board or batterY?
thank you
It is both unless you screw off your phone and check it. Nobody can tell you what is broken exactly...
Hi guys, im testing a crashed galaxy s4, when i use a power supply to wake up pcb, this only give 0.100 Amperes when i try turn on the phone, at put off the buttom this come to 0. Logically is a pcb problem , but, is it possible to fix replacing some chip?,Or should i drop it.
Regards and Thanks.
Have you tried replacing the battery? I'm just thinking most phones won't turn on with a dead battery.
BAttery is right, anyway im using a alternate power supply.
hi all everytime i need to restart my phone during charging it turns off then don't turn on ... when i keep the USB in and push power button it show the that there is water in usb but when i turn on the phone without putting the usb on the phone after it completely turn on i charge my phone normal and it dont send me msg about water in usb
im using light rom
i tried stock rom it also doesnt work
thnx sorry for bad english