Database Users

I REALLY GOT PROBLEM AFTER UPGRADE

I made several upgrades with ROM 4.00.05 ENG ppc2003 from cook machine... with no problems.
after that i decided to try 4.00.16 ENG T-Mobile US. It loads without any problems and the problem starts now. I got strange error when I try to upgrade now (it is on console before Program A starts):
connection disconnected by peer ..
HELP !!! can I do anything ??

seems you didn't invest enough time to read through this forum before starting doing upgrades, coz if you did you should have found that T-mobile ROMs can't be changed by a USB flashing. your only option now is SD card method.
next time if you want to continue playing with different ROMs try to stick to 4.00.05 or 4.00.11

You can upgrade ROM 4.01.00. This version newer than 4.00.16
:wink:

upgrading sx56 went wrong

Well this is the first time I've been unlucky for once. I've just finished cooking up some Rom for my ATT Siemens SX56. I was using the WM2003SE upgrading from PPC2002. I have a feeling that I did something wrong here and I'm guessing that I can't upgrade from PPC2002 and only WM2003? Well I'm not quite sure since I'm new to this. I successfully always upgraded the rom until now. After powering up, it started hanging at the startup logo with the version of the radio stack I think.
G1.3.3
UA.33
3.04
I've tried using ActiveSync and of course it didn't work. The cradle or A.S. did not recognize the device. Tried using XDATool, none. Is there anyway I could go around the ActiveSync?

Use sd card method for flashing.

tried that and it didn't work. I tried almost any methods out there. I tired upgrading from the original ATT Rom PPC2002 to the Special Edition 1.2 Rom and it still didnt work. What's odd is... I can't get my WM2003 to work anymore! When I first started upgrading the rom, I upgraded using SE 1.2, then downgrade to the original ATT rom back to the WM2003 which actually worked fine until I got piss at the radio stack and downgrade back to the PPC2002 but once I tried upgrading to WM2003SE, it didnt work at all which brought me to downgrade back to PPC2002 again and tried upgrading to WM2003 (ATT Version) which still didn't worked. I've tried upgrading the radio stack 6.24 and 6.25 and radio stack that would be compatible for the SX56 still didnt work. Even downgrading my bootloader from 5.22 to 5.15, it still didn't work. It's really odd... Can ANYONE help me?

I have similar problem, I have Qtek 1010 and I can put original rom on only (2002). I have had 2003 on there before and it worked fine but I have tried everything and nothing seems to work, all the 2003 and 2003se rom will not go past the boot screen.
Is your phone working at all.

My phone is perfectly fine, I'm just trying anyway to resolve that booting problem and so far, I'm getting no good results out of it... This is totally driving me nuts!

I tried neally every rom and I can't get any to work on my Qtek except the original 2002 Carrier device Rom...... I don't understand why we could both upgrade before with no worries and now it just will not work....
PLEASE HELP SOMEONE.....
THANKS

Well, so far I tried another rom, an older one and I still didn't get it to work... SD Flashing... The normal method with ActiveSys, it still didn't work. There has to be a reason to why this isn't working. Does ANYONE out there know whats going on here?!

NO SIGNAL

I recently unlocked my wallaby xda, but now i have no signal no network at all, i tried upgrading my radio version to 6.25.02 but it didnt work, i then tried to put my old radio version but i cant find the exact one i had which was 4.21.05 i only managed to get a 4.16... which will not load completely, it only gets to 1% then its says failed to flash rom....... i cant complete the installation and i cant find my original radio version.
PLEEEEEEASE HEEEEELP, NO SIGNAL...........

I really need help with my hermes rom/radio issue

Now I know this is a novas question at best and its probable been covered already but I don’t know how to fix this. First I was experiencing what I believe to be radio issues, like I had a fully functional sim card in my Hermes but I was not receiving and service anywhere, only had this problem with the Hermes other phones where fine. I tried to do the wm6 rom update but I kept getting an error I think it was 262, so then I downloaded spl 2.10 in an effort to just update the radio, and as I went one to install radio rom 1.40 I kept e getting another error and now my Hermes has been stuck in the boot loader for 2 days, can someone please tell me how to get out of the boot loader and how to get my radio working again.

Phone will not connect to network

Hello All,
I upgraded my EXEC to WM6 with the ROM of lucathebig. I did not upgrade the radio rom.
I don't know how it happened but, every time I switch it on, even without the sim card in, I can't access the phone settings! Or even the dialpad for that matter.
When I click on the signal icon, the balloon comes on but says "The phone is off"
When I tap settings nothing happens.
Please note that it was working a couple of days ago. I reset it to factory defaults but nothing happened.
Has anyone else got any suggestions? I will try to avoid flashing the ROM again and I'll keep it as the last option.

Update:
I noticed that there's no Radio version or IMEI on the system information on my phone so I figured that the radio got corrupted or something like that.
I tried to flash the Radio but i get the 114 error from the upgrade tool.
I tried all sorts of different upgrade tools with different radio version but none of it worked...
I am now downloading the official O2 update Xda_Exec_Upgrade_v113188.exe and try to install this instead to see if it fixes the Radio.
Has anyone found a solution for the 114 error? I have read tens of posts but can't seem to fins anything that helps. The people who solve it, use different versions of the update tools or they remove the USB hubs or try the upgrade 3 times.
Help ..?

I tried O2 update but the upgrade executable gave me a country ID error.
So I took the WM ROM and the Radio Rom from the zip file and tried to upgrade both but on the the WM ROM was updated. The Radio rom still gives me an error when I try to Flash...
Ohhhh this is so dissapointing.....