I recently installed (and then uninstalled Resco MediaSuite) on my Imate Jamin. Now, earphone has static. I've figured out that actually the microphone is comes on when I answer a call. The microphone is picking up a bunch of the surrounding environment noise. That's interfering with the sound of voice calls coming through my earphone. Imagine something like blowing into a microphone.
I figured this out because if I put the phone on mute while I'm on a voice call, I can hear the call fine (as I could before I installed the Resco MediaSuite).
Can anyone help me figure out this one? I figure it's some sort of registry setting that got messed up.
Here's my config:
IPL 1.00
SPL 2.G3.4 PDA
ROM Version: 2.20.7.9 PV WWE
ROM Date: 7/06/08
Radio Version: 1_02.20.21
Protocol Version: 4.1.13.9
ExtROM version: PDAVIET
WM 6.1/CE OS 5.2.19214 (Build 19214.1.0.4 PNT)
V/R,
Kurt
I think your best bet is a hard reset...
That worked! Thanks.
Thank you for your help. That worked, although it required some configuration. I'm certainly not complaining though!
V/R,
Kurt
frnorke said:
Thank you for your help. That worked, although it required some configuration. I'm certainly not complaining though!
V/R,
Kurt
Click to expand...
Click to collapse
Glad it worked for you.
Hard resets seem to solve a lot of problems
Related
Hi,
I flashed my Dutch MDA Compact with the 1.06 Swedish QTEK roms and the 1.05 Radio Stack. But now, all of a sudden, when I use my speakerphone, the other side has a lot of trouble hearing me properly. Does anyone have a solution to this?
I already tried hard resetting my device several times, but this did not solve anything!
Other than this, I am quite happy with the update...
try lowering the volume of the speakerphone. Just by using the volumeswitch.
I'm affraid this did not solve my problem.
To be more precise: people on the other side of the line only hear bits of me talking, like i am breaking up or something.
Any other suggestions?
Sanomi said:
I'm affraid this did not solve my problem.
To be more precise: people on the other side of the line only hear bits of me talking, like i am breaking up or something.
Any other suggestions?
Click to expand...
Click to collapse
I can't help you but I have exactly the same problem.
I bought a Dutch T-Mobile (English ROM) last week and I immediatelijk flashed it with the QTEC 1.06 end radio 1.05.
I never user the phone with the original ROM, so I don't know if that had a better quality?
I've the original T-Mobile Dutch ROM still in place. No problem with the other side not being able to hear me. I've seen a lot of messages on upgrading the ROM. But I've seen very few messages telling me what you would gain. Also the sound of the speaker using the phone is fine to me.
AK
mine is unlocked, and I'm using it on Orange network.
ROM 1.01.00 WWE
Radio 1.00.10
ExtROM 1.01.124 WWE
ak_koko said:
I've the original T-Mobile Dutch ROM still in place. No problem with the other side not being able to hear me. I've seen a lot of messages on upgrading the ROM. But I've seen very few messages telling me what you would gain. Also the sound of the speaker using the phone is fine to me.
AK
mine is unlocked, and I'm using it on Orange network.
ROM 1.01.00 WWE
Radio 1.00.10
ExtROM 1.01.124 WWE
Click to expand...
Click to collapse
Same here. What will a compact owner gain? I did upgrade my camera though. Check this thread: http://forum.xda-developers.com/viewtopic.php?t=18244
Hi,
My Wizard works fine except for one problem: when using it as a phone, the little top center speaker doesn't work; I hear nothing.
(no, changing the volume level doesn't help.)
I can now only use it as a phone by either activating the speaker phone function (which lets everone else around me hear what's being said), or use a bluetooth headset.
Both are not really convenient.
Is there any way to test the center speaker without first disassembling the whole thing? activate it with another program besides 'telephone'?
Maybe such a test shows the speaker itself is OK, so no disassembling needed (but what then...).
Any help is welcome.
Tovarim
System data:
OS 5.1.195 (buiold 15605.3.2.0)
ROM version 3.0.0.0 WWE
ROM date 6/7/06
Radio version 02.47.11
Protocol version 4.1.13.24
ExtRom 3.0.0.0 Molski.Biz
Simlock and CIDlock free.
It has also run the original and updates T-Mobile ROMS with the same problem: no center speaker.
Please check this thread http://forum.xda-developers.com/showthread.php?t=261573&page=2&highlight=wizard+headset+plug
Hi,
I've just been reading for the last 4 hours, searching for a solution to my problem of the Hermes not working with my bluetooth nokia car kit.
Specifically, I'm getting serious breakup in areas with perfect reception.
People on the other end of the connection are hearing serious ghosting of their and my voice. Other times, the phone is crystal clear.
The phone doesn't seem to be losing sync and has always paired as soon as I get in the car and turn it on.
I bought this as a business tool and at the moment it isn't worth squat to me.
I have read as much as I can and implore someone to tell me if this issue can be fixed, and if so, point me in the direction of what I need to upgrade without all the acronyms. And yes I have read the wiki
Below are my spec on the unit.
Thanks in advance.
ROM; 1.31.305.2
Rom Date: 09/08/06
Radio Version: 1.38.30.10
Protocol: 32.71.7020.12h
Extrom: 1.31.305.106
Anyone have any thoughts?
i have the same problem with my dopod d810 and the nokia car kit. It connects fine over bluetooth and I can hear everyone else clearly, but no-one else can hear me properly - mainly the ghosting problems and static.
I've been looking at the following registry entries, but have not had any luck as yet..
HKCU\controlpanel|AudioAdvContrl
And as yet have had no luck...
I'll keep trying
sanquar said:
Anyone have any thoughts?
Click to expand...
Click to collapse
Have you tried this software? it has additional support for the nokia HS-12W and a 30 day trial.
http://www.jetwaremobile.com
worked for my bmw x5 BT when nothing else would.
Other options would be to upgrade the radio to 1.40 and/or OS to one of the wm6 variants excluding black 3.0 and 3.1
i noticed big hands free improvements with the BT stack on wm6, to the point where I didn't need jetware anymore.
good luck!
Hi ,
I have a Wizard (Qtek 9100) with WM5 and I wanted to upgrade to WM6.
So I followed the tutorial from Wiki, and managed to upgrade to BlackDiamond 3.1 Touch, I was happy and then very sad when I found out that there is no sound from speaker, but it works with earphones.
I searched the forum and found that
There's a little connector in the earphone slot which bends in the way its not supposed to bend which in fact causes the effect that the phone thinks the earphones are plugged in.
Click to expand...
Click to collapse
but I never used the earphones before.
The sound went off in the update process, but I didn't notice at which step.
Initially my Wizard had
WM5
ROM : 2.17.7.2
RADIO : 02.07.10
IPL : 2.17
SPL : 2.17
The step I followed from the Wiki :
1. Install "Button ROM"
IPL become 1.01
SPL become 1.01
RADIO become 1.12.10.0
OS 1.5.4.2
PROTOCOL 4.0.13.23
2. I used "Lokiwiz 0.2b" Tool to SIM Unlock and CID Unlock
IPL remain 1.01
SPL become 1.01.0000
3. Install "T-mobile Official WM5 ROM"
IPL become 2.26
SPL become 2.26
RADIO become 02.25.11
OS 2.26.10.2
PROTOCOL 4.1.13.12
4. Upgrade to IPL/SPL 3.08
IPL become 3.08
SPL become 3.08
RADIO remain 02.25.11
OS remain 2.26.10.2
PROTOCOL remain 4.1.13.12
5. Install "BlackDiamond 3.1 Touch"
IPL remain 3.08
SPL remain 3.08
RADIO remain 02.25.11
OS became 11.0.0.1
PROTOCOL remain 4.1.13.12
Since I did not move (dropped, disturbed) the Wizard from it's place during the upgrade procedure, I think that the sound problem is software related.
And another question, I noticed that RADIO version remain the same from WM5 to WM6, it's normal or should I upgrade the Radio ?
Edit: I upgrade to Radio 02.47.11, still no sound!
Edit: I tried to call my brother, the mic works and also I can hear him loud and clear from small receiver. But when choose "Speaker On" still no sound!
Does someone has the "Diagnostic Program", so I can run speaker test.
Any help and suggestions appreciated!
Speaker sound lost also
Sadly, the same happened to me with my HTC x7500. I still have not found a solution, but will keep you posted if I do.http://forum.xda-developers.com/images/smilies/frown.gif
speaker sound lost 2
I have a dopod 383pro (i think the same as a HTC Hermes) upgraded to wm6; sound was fine. I then did 2 things in a row & lost normal speaker sound.
I tried about 4 different Blue Tooth (BT) enabling protocols or hacks to allow me to listen to music through my mono BT headset, & dropped it from waist height. the speaker didn't work after that, & I assumed the drop did it. But recently I realized that the Hacks like BT Audio & Navaudio etc may have affected the registry in such a way as to disable the speaker. The BT audio works well. I then found by "accident" that the speaker actually works if I (continue to) push down hard the "connections" button under the On/Off button. This is quite touchy & difficult to maintain. Any ideas?
hermes soooo. why are you posting???
twice... the same answer.... dont duplicate threads!!!! this was asked twice!
I wish you to make a little experiment! please make somebody calls you if the speaker dont works and in the earphone it did so blow up in the hole... maybe you have a little trash inside many people has this issue blow up with power... maybe you can get a preasure air can. so... if not maybe the rom is upgraded an loaded bad re upgrade the OS... if not.... open up your wizard and be sure your speaker are conected to the motherboard... if not you are screw up!!!
Hi there to all of you from Italy.
since some months a strange thing happens to my qtek9000. what happens is that when I receive a call I hear nothing and to hear I have to put the call on speaker. After that, I can go back to the call turning off the speakers.
I really don't know what to do here.
I don't know if this issue was covered before. if so, please excuse me for it.
here's some of my qtek info:
rom 1.30.89 ITA
radio 1.09.00
protocol version 42.42.P8
extrom 1.30.177 ITA
let me know if you need some more info about this.
all the bests
Michael