Hello
sorry for my bad english; i hope that you will understand my problem:
when i open the keyboard, the screen don't turn on horizontal and the keyboard light doesn't turn on.
I changed my cover and after it doesn't work.
i try to open it but i din't resolve the problem
i don't think that is a rom problem, however now i try to change it
thanks a lot for your help!
Khael said:
Hello
sorry for my bad english; i hope that you will understand my problem:
when i open the keyboard, the screen don't turn on horizontal and the keyboard light doesn't turn on.
I changed my cover and after it doesn't work.
i try to open it but i din't resolve the problem
i don't think that is a rom problem, however now i try to change it
thanks a lot for your help!
Click to expand...
Click to collapse
I hope you have the old cover. You did not remove the magnet from the old cover and glue it to the new one! The screen rotation sensor is a magnet operated switch.
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1449001&postcount=6
Mike
mikechannon said:
I hope you have the old cover. You did not remove the magnet from the old cover and glue it to the new one! The screen rotation sensor is a magnet operated switch.
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1449001&postcount=6
Mike
Click to expand...
Click to collapse
Thanks thanks thanks thanks
I resolved it...
sorry but i try to search without result.
my english is bad and i can't explain or found what i wolud like.... =)
really thanks!
khael
Related
I have bought a new housing for my Uni off ebay and replaced my old one. Everything went smoothly but now the screen won't rotate from lanscape to portrait automatically when I flip the screen, neither will it turn on/off the display when opened/closed.
Any ideas how it works to see if I can rectify the problem?
Thanks
Thanks everyone for looking. I have managed to figure it out. In case someone else ever has the same issue, a small magnet is responsible for the screen rotation. It is located near the front camera as can be seen in the picture.
Thanks a lot, I have the same problem so I will check if this works for me...
Did you solved the problem of turn on/off the display?
The magnet is also responsible for the display turning on and off. If you have both issues, you need a magnet
Thanksssssss
XL3N7 said:
I have bought a new housing for my Uni off ebay and replaced my old one. Everything went smoothly but now the screen won't rotate from lanscape to portrait automatically when I flip the screen, neither will it turn on/off the display when opened/closed.
Any ideas how it works to see if I can rectify the problem?
Thanks
Click to expand...
Click to collapse
Thanks amigo
You are welcome guys. Hope this will work for you too.
hi guys,
i just replaced the casing on my dopod 838 pro. though i seem to have two problems. first is that my keyboard won't light up anymore and 2nd when i open my keyboard, the screen won't rotate to the portrait view.
can anyone help me???
First check that all connections are made inside the housing.
Maybe you just forgot some plug.
greetz
playdo
Yes and you forgot to move the screen orientation magnet from the old case to the new one!!
See here:
http://forum.xda-developers.com/showpost.php?p=1449001&postcount=6
Mike
.... so let's hope he didn't throw away the old case!!
Problems occur after replacement of the panels, interested, which provides sensor signals to change a picture in portrait and landscape mode, I would be very grateful if you specify eventoalnite causes of this accident, IMATE JASJAR phone is silver and the new panel is Q2 black, thanks in advance
enigma79 said:
Problems occur after replacement of the panels, interested, which provides sensor signals to change a picture in portrait and landscape mode, I would be very grateful if you specify eventoalnite causes of this accident, IMATE JASJAR phone is silver and the new panel is Q2 black, thanks in advance
Click to expand...
Click to collapse
Anybody experienced this problem, I accept any suggestions and idea
The screen stops rotating when the casing is replaced due to you leaving a small magnet that is located next to the screen in your old case. It's a fairly common mistake and the small magnet is easy to overlook.
enigma1nz said:
The screen stops rotating when the casing is replaced due to you leaving a small magnet that is located next to the screen in your old case. It's a fairly common mistake and the small magnet is easy to overlook.
Click to expand...
Click to collapse
exactly this debate with a friend, consider that the panel was missing that part, now wait to prestigne another part, because mine is different and will test, thanks a lot, I promise to write what happened
enigma79 said:
exactly this debate with a friend, consider that the panel was missing that part, now wait to prestigne another part, because mine is different and will test, thanks a lot, I promise to write what happened
Click to expand...
Click to collapse
The new casing does not come with the magnet pre-installed, of course, you have to actually pull one out of your old casing and place it into the new one. No need to debate, that part is what makes your screen rotate.
enigma1nz said:
The new casing does not come with the magnet pre-installed, of course, you have to actually pull one out of your old casing and place it into the new one. No need to debate, that part is what makes your screen rotate.
Click to expand...
Click to collapse
The problem was in the magnet, was assembled phone today and everything is fine, special thanks to enigma1nz, to magnets was not there on the panel, but this panel was the second hand has fallen and appears in dismantling, now everything is OK
Hey guys,
im looking for a tool which switch the display off if im phoning with someone and hold the phone to my ear and switch it on if im take the phone away from my ear. I allready tried Touch Lock Pro, but i removed it accidentally and as i installed it again, it wasnt working any more
Sorry for my bad english, i hope you know what i mean
Greets,
Leofx
attached zip may help you, manual inside the zip...
Another one... Touch InCall Screen Tweak v1.2.0
p.lepes said:
Another one... Touch InCall Screen Tweak v1.2.0
Click to expand...
Click to collapse
LOL - same app
Hey,
thank you, but before i've allready tried this one and it wasn't working. With which sensor is this programm working? gsensor or light sensor?
greets,
leofx
Leofx said:
... With which sensor is this programm working? gsensor or light sensor?...
Click to expand...
Click to collapse
gsensor - if you hold the phone at your ear (vertical) display is out and if you look at the phone in your hand (horizontal) display is on
Well I did it. I dropped my phone and the digitizer is ruined. Does anyone know of a good tutorial on how to replace it? I found this after hours of searching, but it is vague at best. I have removed all parts but the the digitizer. I do not want to take a heat gun to it until I know this is the right process.
If anyone can elaborate or confirm I would greatly appreciate the input.
Thank You
PopOne
here
http://www.youtube.com/watch?v=gMI7sNY5YZg
there is an aria but design and hardware are the same(except the optic trackball)
and here
http://www.youtube.com/watch?v=SwomVNUtCm0
Thank you for you post. Very helpful indeed. The phone has now been disassembled and waiting on its new glass.
Do not know why I did not check youtube :S
PopulationOne said:
Thank you for you post. Very helpful indeed. The phone has now been disassembled and waiting on its new glass.
Do not know why I did not check youtube :S
Click to expand...
Click to collapse
Keep us informed of your repair, im very curious how easy it is to replace the parts.
u may not need a heat gun.... i just got it repaired here in india. the mechanic fellow did it really gud.....
Hi guys. I just followed this tutorial and replaced my digitizer. However, I must have disturbed the proximity or light sensor as now my screen blanks when I receive or make a call (as it did before) but now I can't re-enable the screen whilst in a call. Is there a way to disable the proximity sensor on the phone or another way of fixing this issue?
memeny said:
Hi guys. I just followed this tutorial and replaced my digitizer. However, I must have disturbed the proximity or light sensor as now my screen blanks when I receive or make a call (as it did before) but now I can't re-enable the screen whilst in a call. Is there a way to disable the proximity sensor on the phone or another way of fixing this issue?
Click to expand...
Click to collapse
if you use cht 2.0 there is a switch of proximity sensor..so u can enable or disable it