I have bought a new housing for my Uni off ebay and replaced my old one. Everything went smoothly but now the screen won't rotate from lanscape to portrait automatically when I flip the screen, neither will it turn on/off the display when opened/closed.
Any ideas how it works to see if I can rectify the problem?
Thanks
Thanks everyone for looking. I have managed to figure it out. In case someone else ever has the same issue, a small magnet is responsible for the screen rotation. It is located near the front camera as can be seen in the picture.
Thanks a lot, I have the same problem so I will check if this works for me...
Did you solved the problem of turn on/off the display?
The magnet is also responsible for the display turning on and off. If you have both issues, you need a magnet
Thanksssssss
XL3N7 said:
I have bought a new housing for my Uni off ebay and replaced my old one. Everything went smoothly but now the screen won't rotate from lanscape to portrait automatically when I flip the screen, neither will it turn on/off the display when opened/closed.
Any ideas how it works to see if I can rectify the problem?
Thanks
Click to expand...
Click to collapse
Thanks amigo
You are welcome guys. Hope this will work for you too.
Related
hi guys, I have a problem, my screen keeps doing this thing where it stops working, it looks like the device has crashed, but all the buttons work fine. the touch sensors for the screen works about 30% of the time. I've just figured tho that if I twiddle the screen a little it works again. but does it again soon after.
does this sound like it needs to go back to shop for repairs? does it sound broken?
please give your replies.
I have a similar problem with the screen:
- Sometimes (once or twice a day) the Universal does not accept touch screen input.
- Then I twist the screen back and forth.
- After this touch screen works again.
How can avoid this?
BTW, is there a method to physically fix the screen in landscape?
I only use the Universal with the screen oriented in "Laptop" Mode.
Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
lorrin said:
Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
Click to expand...
Click to collapse
This might help:
http://forum.xda-developers.com/showthread.php?p=1098622#post1098622
Mike
Cheers. I will have a look
Why do you need to turn auto rotation off?
sprice82 said:
Why do you need to turn auto rotation off?
Click to expand...
Click to collapse
same reson I want to
to stop the screen rotation when puling out of my case
elivne said:
same reson I want to
to stop the screen rotation when puling out of my case
Click to expand...
Click to collapse
If I understand correctly you mean when taking the device out of the carrying case. The orientation can change when taking it out of the case due to the magnetic catches in the case operating the keyboard magnet operated switch.
If this is the problem then I suggest using a case with no magnets. (a better solution than disconnecting the switch). This however is not the same as not wanting landscape mode when the keyboard is out as the OP wants.
Mike
I remember getting very annoyed with the phone changing orientation when in it's magnetic case when I first got it. I searched and searched for days to find a setting or tweak to fix it. Eventually, I mentioned to my wife that I need to buy a new case.
She said "why don't you put it into the case the other way round?".
I put it in with the screen facing the belt rather than the magnets, and it's worked fine ever since that way round! Felt such an ass!
Sometimes I don't see the wood for the trees me...
I know it's the magnet doing it
I've tried the following:
1. Buy a new case with only one magnet clip (a magnet clip is more comfortable then scotch or any other solution).
2. Reverse the screen to the back.
None works, I think it's the way I pull it out...
Anyway, the only solution doesn't exist, I can't find a normal belt side case.
So my last resort is to find a way to stop the rotation, I always miss calls cuz the rotation during a call slows the device and I can't answer...
I tried to use that registry hack, I followed the instructions and I do not have the rotate icon..even after two resets. Is there any other way to force your screen a certain way?
I changed the entire housing on my Hermes as it was looking a little battered. All seemed ok but now when I slide the keyboard open the orientation stays in portrait mode. Also the keyboard light stays off. I've tested another keyboard pcb from an old broken hermes and the same problem persists.
Does ANYONE have any clue as to how I could fix this, or if it's even fixable. Not as bothered about the backlight....
Also my internal mic volume has gotten really low. I have to switch to loudspeaker unless i'm in a really quiet room!
there is a magnet in the housing that triggers a switch to swap the screen, did you swap it over?
It'll either be what beermonster65 said above, or possibly the ribbon connector which connects the screen to the mainboard isn't plugged in properly - I had that when I opened mine up to repair the sliders.
beermonster65 said:
there is a magnet in the housing that triggers a switch to swap the screen, did you swap it over?
Click to expand...
Click to collapse
As far as I knew I switched over everything from the old housing. What does this magnet look like and where is it? If i've lost it is there a possible fix?
Thank you both for your responses so far.
Any news on the mic issue also?
Hey guys... I'm having a lot of troubles with the lcd screen on my 8525 and this start about a month ago.. I've had this phone for almost one year... bought it as a refurb.
1. when i'm using the phone portrait mode the screen alignment would be perfect... however when i slide the keyboard open the screen goes to landscape and my alignment would be completely off. Heres the interesting part... say if it is still in landscape and i align it then.. it would work perfectly in landscape but then when i close the keyboard and go back to portrait the alignment would be extremely off again.
2. now when i'm in portrait mode and i go to start -> settings -> system -> screen and switch the screen to landscape (w.o sliding the keyboard open) the screen would be perfectly aligned... but when i slide the keyboard open... the alignment would be completely off again... now if i align it while it is in landscape (keyboard open) and go to start..settings..system..screen and change it to portrait the alignment would be perfect... but when i close the keyboard.... it would be off again...
is there anyway i can fix this? I've done a hard reset and flashed the firmware all over again... btw i'm using WM6 from the htc website. if anyone can help...lemme know what i have to do....
thankz
p.s my phones starts with s/n ht649.
Can't say I've seen that reported before. Sounds software based. You could try backing up and hard resetting.
Mike
I already tried that.. it didn't work.
Sorry, my bad - you clearly said you had done that already.
I can't fathom what hardware problem there could be. The magnet orientation switch is clearly fine it seems the X Y co-ords are not swapping over - but that seems a software matter, yet your hard reset suggests hardware - Im stumped.
Mike
If the whole screen is moving, including the start menu etc,
I have seen this before, when building my phone, if the lcd ribbon cable is not alligned perfectly this can occur... but resetting the device did not resolve the issue in this instance.
Cheers
Steve
So I guess I'll have to take it to a cellphone repair shop and have it looked at. I just hope it won't cost too much... the phone was a refurb and i got it for $100. Do you guys have any other suggestions?
i think my proximity sensor is too sensitive because it ONLY works normal when i am outdoors at direct sunlight, but even when my shadow drops on the sensor it locks the screen, also in shade or in well lit indoors my proximity sensor doesnt work properly either.
i want to know if there is a way to change the SENSITIVITY of PROXIMITY SENSOR at will? i removed the screen protector so there is nothing on the way of the sensor.
also during a call pressing hardware buttons doesn't bring the device back from standby, hardware buttons are lit for a split second and nothing happens. is there any way to use the hardware buttons (except "end call" button of course ) during the call to turn the screen on?
t-mobile us hd2's proximity sensor works fine but mine has a problem, see the video here;
http://www.youtube.com/watch?v=OKCRqFYtLMs
thnx for your help..
Any idea?
Any idea? Does anyone have the same issue? Plz it's a very irritating problem I couldn't find a solution..
I havent own HD2, but eventually I will get it this year.. So, I wondering why you removed screen protector? because of sense Ui wont work with screen protector?
I removed the screen protector because I thought that it blocks the proximity sensor and cause it to malfunction, I searched the forum and some people had the same problem but solved it by removing the screen protector. But it didn't work in my case so I'm looking for a solution.
As you can see on the video the proximity sensor works normal under direct sunlight when i move it to the window, in the room it somehow doesn't work correctly..
(english is not my native language so pls excuse me)
Thank you
Thank you for your creativity with subtraction
Sorry for disturbing again but my problem is killing me i am desperate to find an answer could you pls at least share some ideas or recommend something to do?
İ emailed HTC for the issue and waiting for an answer, if you have any idea pls feel free to share i'm stuck with this annoying problem, thnx..
HTC's response
I do apologize there is no way to change the sensitivity of the proximity sensor on your device. You can try a soft reset by pressing the reset button on the back of the device. If that does not resolve the issue then you may want to do a hard reset on the device. Hard resetting the device will clear off the device and reset everything back to factory settings. You will want to back up your information from the device before doing the hard reset. If the hard reset does not resolve the issue then I suggest contact our support department..........
Click to expand...
Click to collapse
I guess I'ıı have to get the proximity sensor changed..
I searched eBay for a replacement but couldn't find it there are proximity sensor replacements for iPhones, I wonder if the iPhone's and HD2's sensors are the same?(probably not but I just want to be sure)
Hi a have the same problem. Did you found the solution?
well the promicity censor has nothin to go with light or shadows..it could be a glitch in the Radio or ROM try using a new radio or ROM