I have a HTC Touch 3G (Jade?), and I would like to manage info about the storage memory. In the configuration menu (quit programs) I have not info about the memory of each program, and so it is difficult to manage the (limited) memory.
Any app to manage this info?
Thanks jade-addicts!
Try MemMaid from Dinarsoft.
Thanks azahidi, I'll try it!
Related
I now have an SD card so I'm going to rebuild my xda2 system with my preferred applications. Some of these can go on to the SD card and I know that some must go in to main memory.
Can I save settings for programs like Pocket Informant and Battery Pack Pro and use them in the new system? If so, how?
for pocketinformant at least the settings are stored under my documents, so it should automatically be restored when you sync again.
Surur
Thanks for your answer Surur I'm a bit closer to taking the plunge, I've just identified that file in my backups.
I use the Storage to store some DLLs to save space. It works, not for all programs though.
Have tried installing programs to storage before (Journal Bar and Avantgo) but system seemed to be unstable afterwards.
Wonder if anyone has any good experience of storing and running other programs from Storage.
Also, has anyone tried installing the cab files from extended rom to Storage??? Is that possible at all???
RE
Yes, you can use Storage to store your cab files for the EXTROM.
BTW, program cab files for Storage and EXTROM are those that don't upgrade frequently otherwise you'll have to hard reset frequently too
Using Storage or Storage Cards should be avoided for anything on the today screen or anything which is bound to a hardware button. This is because the SD drivers take a little time to initialise when the device powers up and can result in files not being found - which can lead to small or big problems, depending on the nature of the 'missing' file.
This is why Pocket Plus cannot be installed in Storage any more and why Pocket Informant recommends installation into main memory. This is documented both by Spb Software House and WebIS.
I was beta testing SpbWeather and had some of the skins installed to Storage - whenever I used those skins, the plug-in was icon-less on power up, but main memory skins were fine.
As mentioned above, be careful selecting where to install Today Screen plug-ins.
As of the Storage, well I am not sure but I recommed you put in SMALL items in there since the storage becomes unstable at times because to OS may use a little of the Storage space to accomodate memory intensive applications like Adobe Acrobat. Correct me if I am wrong but this is what I understand about it.
Mvmajorem said:
As mentioned above, be careful selecting where to install Today Screen plug-ins.
As of the Storage, well I am not sure but I recommed you put in SMALL items in there since the storage becomes unstable at times because to OS may use a little of the Storage space to accomodate memory intensive applications like Adobe Acrobat. Correct me if I am wrong but this is what I understand about it.
Click to expand...
Click to collapse
Ther is so little storage there, why not just ignore it and use SD memory, or main memory where required?
I use storage to store my wma ringtones... haven't have the guts to move the DLLs yet. with regards to this... if i create a folder named Windows in Storage and move all my DLLs there would I need to hack into the apps individually ang make them look at this folder... or will the OS automatically look at both folders? Some people say to use systempath to do this.
bnycastro said:
I use storage to store my wma ringtones... haven't have the guts to move the DLLs yet. with regards to this... if i create a folder named Windows in Storage and move all my DLLs there would I need to hack into the apps individually ang make them look at this folder... or will the OS automatically look at both folders? Some people say to use systempath to do this.
Click to expand...
Click to collapse
As I know U have to hack the registry files of single appz to point in to storage folder instead in the main memory... :roll:
Regards,
Primoz
belfast-biker said:
Ther is so little storage there, why not just ignore it and use SD memory, or main memory where required?
Click to expand...
Click to collapse
It's 10% of the device's memory, that's not insignificant and certainly not worth wasting. I store 13.2Mb of utilities and etc. in Storage so that it frees up the same amount of Main Memory but permits me to use them when swapping cards. I think it's a waste not to use it.
Into my Storage i have install :
Resco keyboard pro
Laplink controller
Handymenu
Hottbutton plus
Phone today
Today phone pro
VIto voice dialer
Used space for all this 3.21 mb
Free space 4.31 mb
I Don't have any problem at all, my JAM works smoothly & stable plus the today plugins run faster than ever...
Try with no doubt ...
Hi, I really like using emulator on my wizard. But I need around 33MB Program memory free to use one of my favorites. Is there any way to get that kind of program memory free? After a soft reset I have around 27MB free , what can I do to free up about 5 to 6 MB more?
Please someone help me out on this one?
Thanks!
Buy a storage card, thats what they are for.
boboki said:
Buy a storage card, thats what they are for.
Click to expand...
Click to collapse
Thnx for you reply, but I'm talking about Program memory, not Storage. I own a 1GB storage card, and I know what they are for
I'd like to know too, I only have 25mb free after soft reset. I'm guessing you don't have any Today screen plug-ins, which gives you 2mb more than I, as I have Pocket MSN, PHM Launch, SmartSKey, OmapClock, and vBar all running. btw, is the program you want to run PocketGBA, because that's the app. I want to free up my program memory for in order to play 32mb carts?
NorrinRadd said:
I'd like to know too, I only have 25mb free after soft reset. I'm guessing you don't have any Today screen plug-ins, which gives you 2mb more than I, as I have Pocket MSN, PHM Launch, SmartSKey, OmapClock, and vBar all running. btw, is the program you want to run PocketGBA, because that's the app. I want to free up my program memory for in order to play 32mb carts?
Click to expand...
Click to collapse
Lol, yes, that is the app I want the free memory for, nice to see another emu fan.
And yeah, i have to no today-screen plugins loaded. I really hope someone has a solution to this.
I hope so too as well, but so far you have the most free memory of anyone i've seen on the forum. Too bad we can't apply storage extended rom memory to program memory like previous OS'...
yeah, I understand why it's usefull to have the program mem seperate from the storage, but it was pretty cool to be able to increase your program mem with the slider...
But back then all of the memory was the same RAM no matter if it were used for programs or storage, now with persistent storage it's seperate memory and the flash memory is much much slower you wouldn't want to reallocate it like that anyways.
so there isn't a solution for this?
Try running in safemode
Safe mode releases all the plugins and programs to run in memory.
SPPOCKETPLUS have this utility.
Hi all, can i move all the cookies,history,cache to my storage card instead of saving it in my device's memory, are there any registry tweak that can automatically do that while im surfing the net?
use anton tomov pocket mechanic. the program will automatically adjust all necesary registry entries, also all shortcuts refering to old storage or place in device memory.
also read the wiki! it's got all sorts of useful info on this!
Go to Tweaking The Hermes Registry. It's in there.... you need a registry editor to do this but youve got to dive into this eventually so why not now?
Although I Might ADD:
I stored my PIE cache on the storage card for a while (bc it took up 17 MB of memory on the phone) and it did crash more than usual....
After a hard reset I didnt feel like taking all the necessary steps to reconfigure, so I just use ClearTemp to delete the PIE cache and dump my recent programs... VERY useful program ...
thanks for the input guys ....
Every time when I start the GPS (Route 66) I got the mensage 'ERROR - Not enough memory to open this map'. The only way to use the GPS is to do a 'soft reset', then after start again the GPS general works. I use a 2Gb memory card which have more then 1Gb free.
How to improve the 'program memory' and avoid this problem??
There is a programm called "hibernate" which frees memory
Also there is Memmaker 2.2, a program that optimizes the RAM usage and the Memory Storage, eliminating unnecessary files and moving temp files to the storage card.
Very good program! If you use it once in a while, with batterystatus, you will have full knowlege of what is going on on your PPC all the time.
Icefeldt said:
There is a programm called "hibernate" which frees memory
Click to expand...
Click to collapse
Thanks Icefeldt, the "Hibernate" really works and is very easy to use it! Many thanks!!!
Dear 'working man', where can I find the program "Memmaker 2.2"??
MiguelChina said:
Thanks Icefeldt, the "Hibernate" really works and is very easy to use it! Many thanks!!!
Click to expand...
Click to collapse
no problem
Memaid 2.2 is from Dinarsoft. Try google
....
del Program not use