Touch or L.C.D? - P3600 General

Hello,
At last i got my used HTC P3600 by upgrading from my Blueangel.
The device have one issue which is that when i press something in the center the start menu pop up. I also try to align the screen but it is aligned properly too. But, whenever i press something in the center such as number 5 while dialing any number the start menu pop up.
Is this digitizer problem or i have to change the complete L.C.D?
Thank you.

mustking said:
Hello,
At last i got my used HTC P3600 by upgrading from my Blueangel.
The device have one issue which is that when i press something in the center the start menu pop up. I also try to align the screen but it is aligned properly too. But, whenever i press something in the center such as number 5 while dialing any number the start menu pop up.
Is this digitizer problem or i have to change the complete L.C.D?
Thank you.
Click to expand...
Click to collapse
it is a famous problem!! install Batti and you solve your problem

mpowerbit said:
it is a famous problem!! install Batti and you solve your problem
Click to expand...
Click to collapse
What is Batti and where i can found it! Is it software or hardware?
Thanks.

Related

P3600 screen no response

Hi all,
I have my P3600 for only 1 month. The touch screen suddenly has no response without any reasons.
I have tried soft and hard reset but with no luck. Is there any hold button/fuction at the P3600?
Can you guys please help and give your expert advise.
Thanks.
Dennis
Anybody please.
The buttons are functioning just the touch screen had not any response
are you using a screenprotector?
ifnot youll probably need to rma it
You have notice that the menu start pop up with no reason?
Try to place the trinity in a very cold place and tell me if the touch screen function again.
I find that in a warm place some trinity simulates the press of the upper corner sx pixel, so in this case the touch screen not respond and the menu start pop up frequently.
i have this problem, my trinity open the more start menu and the screen not respose. Only recover this problem is remove the battery and wait more hour.....
I have this problem also, bring back to service centre and they said the LCD might me the cause of the problem, replace it under warrenty.
Could you post the S/N and the radio/rom version of the device with the "start menù" problem?
Unfortunatelly I have this same problem, I have read on the internet that when the trinity gets hot it does this because some parts of it extends and puts pressure on the screen top left corner.
I don't know how to fix it but it is a relief that I am not the only one having this problem. I don't know what the fix is but this problem basically renders the phone useless for me.
If anybody has resolved this issue with HTC please let us know.
I don't think it's a pressure problem on the screen.
I have the same problem also with the phone totally open and the screen free of the upper cover.
I have the same problem.
It's not a LCD Screen problem because i have replaced LCD screen with a new but it's the same problem.
Perhaps touch screen controller on motherboard or touch screen driver (dll) in the ROM.
I think it's linked with the following problem :
http://forum.xda-developers.com/showthread.php?t=290519
I have the same problem.
I repeat:could all you that have this problem post your serial number??? (exp,htc646...)
me too
My start button flashes too.
If I change the viewing mode sidewards, it is the calendar button that pops up all the time., and opens the calendar again and again. You can not control it anymore. Just X all the time. Seems to be software or ?
rom 1.23.707.6
radio 1.35.00.11
P 3600 Ger
sn HT648FK10262
maybe someone came help us.
thank you
seppo
seppo said:
My start button flashes too.
If I change the viewing mode sidewards, it is the calendar button that pops up all the time., and opens the calendar again and again. You can not control it anymore. Just X all the time. Seems to be software or ?
rom 1.23.707.6
radio 1.35.00.11
P 3600 Ger
sn HT648FK10262
maybe someone came help us.
thank you
seppo
Click to expand...
Click to collapse
how much time after the purchase?
did it start suddenly?
open and close,start menu
hi
i have rom 1.24 my problem is that the menu start .......is crazy
open/close open/close open/close i must remove the battery
i want a new ROMMMMMMMMMMMMMM
shuttle77 said:
hi
i have rom 1.24 my problem is that the menu start .......is crazy
open/close open/close open/close i must remove the battery
i want a new ROMMMMMMMMMMMMMM
Click to expand...
Click to collapse
I wonder if this screen problem is going to be a time bomb for everyone. I don't think it has anything to do with the new ROMs as it is a hardware problem.
I hope it's not like the peeling thing. One started complaining and ten days later everybody was facing the same problem.
DavidTwister said:
I repeat:could all you that have this problem post your serial number??? (exp,htc646...)
Click to expand...
Click to collapse
Could you explain for what you want to know serial number? This can help or just for statistics? Maybe then everybody will be glad to do it.
I bought the device on Feb 3rd,
and it started on march 3rd when playing a 'tetris like' game. It always opened the 'new game' button on the bottom left, while playing.
I must say, it does not occur constantly! There are times I use my p3600 and it is completly normal. But then just as from ghosts hand the task that is combined with the button in the 'left top corner' (upright position) starts to be pushed.
Seppo
[email protected] said:
Could you explain for what you want to know serial number? This can help or just for statistics? Maybe then everybody will be glad to do it.
Click to expand...
Click to collapse
Simple:i'm trying to understand if it's a problem of specified p3600,or if it's a problem that occurs randomly in all the p3600!
Ok. Lets collect same statistic but lets do it organized. For example my data.
Rom: 1.15.405.5 (HTC) - official (or modified by somebody)
Radio: 1.20.00.11
s/n: HT645FK08xxx
CID/SIM Unlock: No (or "Yes" if you did it and with which method - IMEI or FreeUnlocker)
Screen Protector: Yes ("Brando" mat for Qtek s110/S200)
Issue: "Start" menu pop up very seldom (seldom,often,very often,constantly) while I use stylus to scroll items of field "Play sound" of "Clock&Alarms" Settings, switch "iLauncher" tabs, play "MasterSoft Sudoku" (I list all places where I find out my issue) and I need to tap to "Start" or other place of the screen to close it.
I do not do CID/SIM Unlock and I do not reflash any ROMs. My current ROM is the ROM that was then I purchase P3600.

I cannot go past the 'align screen' setup!

Scaphs 4.20 is the 3rd ROM i have tried, and my phone will not align itself!!!!
I tap the target firmly and accurately like it blady tells me at each location 5 times, then the process just repeats itself!!
There is no dust or dirt on my screen.
What's next? Throw this phone against the wall?!
STUCK IN align screen window - -HELP
kastro said:
Scaphs 4.20 is the 3rd ROM i have tried, and my phone will not align itself!!!!
I tap the target firmly and accurately like it blady tells me at each location 5 times, then the process just repeats itself!!
There is no dust or dirt on my screen.
What's next? Throw this phone against the wall?!
Click to expand...
Click to collapse
I suddenly have the same problem - no one else? My problem is more specific. Screen alignment seems normal until the 4th (last) corner is reached. Then no response x2. By third try it jumps back to center to start again - no way out!
I have reflashed to TMobile WM5 V2, Love, and several WM6 ROMS - all same issue. I can read my phone fine though active synch - al software is there ...
IS THE DIGITIZER GONE BAD - ? just in one corner? How can I be sure? Any way around the required align screen to test further? PLEASE HELP!
Same issue,follow here:
http://forum.xda-developers.com/showthread.php?t=285062
HELP!!!!!!!!!
My 8525 could not pass the alignment screen so I bought I new digitizer and I installed it and I still get the same thing. What else can it be???
Disable Touchflo.... that should work if you have that enabled. Also Transcriber WONT work with Touchflo enabled. Cheers
HELP!!!!!!!!!
The Touchflo was never enabled on the phone. What else can it be???
thanks
Solutions for all of You : http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Same thing happened to me last week. I did a hard-reset because I was having a different problem and then I couldn't get past the screen alignment. I brought it to an AT&T Device Support Center and they couldn't figure it out so they swapped it out for me
jas_pik said:
Solutions for all of You : http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Click to expand...
Click to collapse
this just what i need since my touchscreen did not work thanks a milllion
And in case you want a little more info on that codefactory remote alignment application, see here:
http://forum.xda-developers.com/showthread.php?t=347539
Mike

Screen No Response but Occasional Response HELP

Hey I have an elf the T mobile version 64/128mb , phone has been working for 8 months now all of a sudden it wont respond but the call and end call buttons work fine the 4 way navigation key only work when lets say you go into the call records by pressing the green call button. You cannot do anything besides change time, answer calls and hang up. Please Help Tried hard reset soft reset, and the phone is unlocked to all networks using the network key method.
this looks a hardware problem may be the LCD or the digitizer
Is it fixable by software or maybe opening it up to fiddle ?
It is not the LCD, it is only the digitizer (the thing that is responsible for the 'touch') I recently had the same problem, until 1 week ago I purchased a new digitizer off eBay for $15.
Do not get LCD and Digitizer, just the digitizer to save money.
If there is no cracks or damage to the screen (bad cracks, pixel damage etc) you only need a digitizer.
I have a video I made of me changing mine which I'm editing atm. I do have photos.
This is the correct response. It is not software if it started to work occassionally and then stop, this is what happened to mine. 99% it is digitizer!
Thats cool please email me link [email protected] for your video I will order one now.
http://www.google.com/search?hl=en&...nge+digitizer+htc+touch+youtube&aq=f&oq=&aqi=
See the 3rd result.
Hey I read its going to ttake 14 days for my digitizer to come , in the mean time is there a way I can bypass the touch the screen alignment page when you first boot up?
you can get www.mymobiler.com
Cheers.
Tried it but requires you to accept the installation on the phone any other ideas?
Thats weird, mine doesnt.
it will auto install.
It says on the little status box installing mymobile to the phone then it dissappears saying not connect. this message comes up everytime you try and run it.
Sorry, I ran out of brain juice.
You have to stick with this for a while than, and bear the bitter pill.
MyMobiler should be able to install onto the phone itself.
But I really wonder why this doesnt work.
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
varyjam said:
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Click to expand...
Click to collapse
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
varyjam said:
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
Click to expand...
Click to collapse
Can you use the d-pad to do that?
Thanks you guys just come back from florida fitted the new digitizer everything works super and the digitizer i bought came with a new screen attached to it. best £7 spent lol
jeremy89632 said:
Can you use the d-pad to do that?
Click to expand...
Click to collapse
tried but d pad just initiates what ever is highlighted on the today screen
^^ A digitizer is a screen Its the touch screen part with htc logo at the bottom... right? (with a little ribbon comin out).. this IS the digitizer! (screen included).

htc blackstone screen calibrate

hi
i made a had reset for my htc blackstone but now can't calibrate touch screen it return always in the center of screen .
Any solution to skip screen calibrating
thx
flashing rom can cause this problem ??
hbstun said:
flashing rom can cause this problem ??
Click to expand...
Click to collapse
Do a Hard Reset again
ozmoran said:
Do a Hard Reset again
Click to expand...
Click to collapse
can't reset it
!!
Take the battery out. Pop it back in. Hold down both volume up and down and tap the power button (don't hold the power button down though). You should then boot into a menu where you can do a hard reset.
On a similar note though I used to look after some old Windows CE devices that would do the same thing if you clicked too far away from the cross, never tried it on my HD though!
crankshaft said:
Take the battery out. Pop it back in. Hold down both volume up and down and tap the power button (don't hold the power button down though). You should then boot into a menu where you can do a hard reset.
On a similar note though I used to look after some old Windows CE devices that would do the same thing if you clicked too far away from the cross, never tried it on my HD though!
Click to expand...
Click to collapse
there's no solution to skip align screen ??
hbstun said:
there's no solution to skip align screen ??
Click to expand...
Click to collapse
When you hard reset the device, everything is wiped on device apart from OS, so you need to align screen at start to be able to use device once automatic setup has completed.
There is another option as Throys latest roms, R6 & R7 has a complete automatic setup and there is no align screen. You could always try one of these
Try using the tool located at this thread, maybe it helps.
chitza said:
Try using the tool located at this thread, maybe it helps.
Click to expand...
Click to collapse
worked on my htc touch HD . tnx

[Q] screen trouble

Hello you all
I've got a strange problem with my HDmini :
Sometimes, the screen stops responding !
I can touch any button, the screen in any place, nothing happens.
I only have to remove the battery ( because thre is no reset ).
After strated again, when PIN code is asked, if a tap on "3" for exemple, it is like if i have tapped on "6" ; if i tap on "erase", i see "cancel" highlighted !
And after a few minutes, everything becomes normal again.
An idea ?
Did you install any cab or custom settings?
Yes, i'm using throttlelauncher with WP7 theme but when the screen is stuck, i have two choices :
Remove the battery to start again, without throttlelauncher started .
Restart the HTC with Mymobiler if the HDmini is connected.
At the end, the problem stays on.
I only have to wait for some time and then the touchscreen works again... by itself !
I haven't tried Throttlelauncher yet. I don't know if that can be the possible culprit.
Bart3385
For example, yesterday and today everything was OK and 5 minutes ago, the screen has stuck again !
Nothing possible to do on the screen neither with the 5 keys at the bottom !
I have to connect the HDmini to the PC and reboot it with my mobiler;
then i can use the screen interface.
It seems that the problem is the touch screen !
francois64 said:
Bart3385
For example, yesterday and today everything was OK and 5 minutes ago, the screen has stuck again !
Nothing possible to do on the screen neither with the 5 keys at the bottom !
I have to connect the HDmini to the PC and reboot it with my mobiler;
then i can use the screen interface.
It seems that the problem is the touch screen !
Click to expand...
Click to collapse
Try to ask for a new device (if it's still under warranty )
bart3385 said:
I haven't tried Throttlelauncher yet. I don't know if that can be the possible culprit.
Click to expand...
Click to collapse
Maybe your device is blocking so hard that your keys and screen both don't work anymore. I have had that too once Maybe Trottle causes this?
Madmatt
The problem is to be sure that a software is the problem origin; before i ask for the PDA to be replaced by my operator.
Try to do hard reset. Install only the basic stuff. (Minus Throttlelauncher.) See if the phone goes back to normal.
_Madmatt said:
Try to ask for a new device (if it's still under warranty )
Click to expand...
Click to collapse
That's a possible option.
Somehow, i'm not allowed to make that kind of suggestion anymore. Someone keeps on following me and make a mockery whenever i mention anything like that.
Anyway, try to check software problem first. As i first did on my own device. Before i've ascertained it is defective hardware.
francois64 said:
Hello you all
I've got a strange problem with my HDmini :
Sometimes, the screen stops responding !
I can touch any button, the screen in any place, nothing happens.
I only have to remove the battery ( because thre is no reset ).
After strated again, when PIN code is asked, if a tap on "3" for exemple, it is like if i have tapped on "6" ; if i tap on "erase", i see "cancel" highlighted !
And after a few minutes, everything becomes normal again.
An idea ?
Click to expand...
Click to collapse
It is normal, sometimes, it doesn't respond, lame htc hd mini. I have this problem long ago.
Thank's for your suggestions.
Today, the phone is completly stuck.
That's why i don't think it is a software problem.
I can' even entry the PIN code.
i've tried a Hard reset, to flash back to Original Rom = nothing more.
So i've asked Orange for an exchange under garanty...
That's a good move.
In some areas, a high percentage of units need replacement.

Categories

Resources