Database Users

Invalid Vendor Id and upgrade to wm6

i have the c800 with rom 1.7 , i would like to upgrade to newer version at 1.8 but at 2 % was stoping with note : INVALID VENDOR ID
Can somebody help me to this problem, i would like to upgrade to wm 6 and need the radio version more than 2.71 instead the original asia at 2.69
This lowest version make the signal always keep searching on gsm..with wm 6 os , really sad for this problems..hoping somebody can help this problem

Invalid Vedor ID means that your device is CID-locked, so you can only flash official ROM's to your phone. You can however unlock your phone at imei-check.co.uk.. BUT a person has already bricked his device with this, because it did not work properly! At this tim of speaking there is no alternative for CID-unlocking.

CID unlock...
...i have an Herald to. The OS was in finish(i think)...the only way i found to write an WWE OS...wrote to IM CHECK.CO.UK...in same day send me the application for my IMEI to unlock. I made the unlock under Vista Home Premium...now i have a brand new WWE OS in my HERALD.
Try it...it realy work.

CID unlock...
http://www.imei-check.co.uk/

But the CID unlock for what is? It's for a phone which is blocked to a company?

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
Why are you posting like you have the solution and instead you are looking for help?
If you do so, only people with same problem like you will read your post!!!!
Christian

schumy said:
But the CID unlock for what is? It's for a phone which is blocked to a company?
Click to expand...
Click to collapse
For the lock that is set by the company indeed

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
The title of your thread is a little bit too optimistic don't you think? If you have the solution, kudos! But if not, please watch your title.. I almost jumped a hole in the ozon layer, but too bad...

need help ( german to english)
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...

kunalg7 said:
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
Click to expand...
Click to collapse
While the phone is on, press the soft reset button with the stylus while holding the camera button. You should then see a tri-colored screen(this is the bootloader mode, to exit simply soft reset again). What version does it say next to IPL? If it is 4.0 or higher, you need to flash HardSPL, found here. Don't do it anyway if your IPL is lower than that, it will turn your phone into an expensive doorstop. If you do have the right IPL, then proceed to flash the HardSPL, then choose your ROM and install it. However keep in mind, you won't be able to install any official ROMs while HardSPL'd. But official ROMs suck anyway.

Herald Unbrick... At least!

Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!

wait....how did your herald get bricked?
i assume it was during a failed HardSPL

yes dude unfortunately
but the main here is to recover OS area... at least

I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck

if the above does not work, try flashing using the USPL

tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.

a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.

mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!

Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.

Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:

HEY
how progress on unbricking
hopefully you get it working

first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????

all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored

it means we should give our ppcs to repairman to change their motherboard??????????????

no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us

tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful

thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro

new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami

dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))

tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami

[Error 300] INVALID UPDATE TOOL!!! Is there any fix

Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?

nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned

farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!

anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.

corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2

Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????

no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---

ELF JTAG In Need

Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........

JTAG?
Why do you need to flash in this manner?

Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......

You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.

jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse

alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?

Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.

Thanks for the compliments
Glad to help.

So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind

Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................

Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.

Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........

let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.

Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........

So wait, did your phone worked in the end?

Yes its done man & thanks to u tooooooooooo

Great to hear that.
If you have any more issues, hit us back again

Have anyone to help

have a HTC Athena 7500 SLP-V1.20 OLIPRO and tried to install Athena_SPL3.5_R6.5_RC1_B21500_MiChY And U.S. IMPOSSIBILITIES nothing more I DO HAVE ONLY THREE COLORS UKRAN have no proper rom not know how to get it back to life if you can help I would gladly pay

Hope it helps
skorpionxxx said:
have a HTC Athena 7500 SLP-V1.20 OLIPRO and tried to install Athena_SPL3.5_R6.5_RC1_B21500_MiChY And U.S. IMPOSSIBILITIES nothing more I DO HAVE ONLY THREE COLORS UKRAN have no proper rom not know how to get it back to life if you can help I would gladly pay
Click to expand...
Click to collapse
Hi,
I will try to help, though not an expert, because few minutes ago I managed to fix a problem that looks like yours. Actually this is my first post!
What I suggest is to initialize your device by flashing a shipped rom. You can find it by googling "shipped roms" and looking for "athena"
First, download the version: RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe
Then, enter the bootloader (this is the tri-colored screen), by fully pressing camera button + reset. Make sure that you see "USB" at the bottom part.
Then, run the downloaded rom.
This is a good start, as you will bring your x7500 back to life.
PS. Don't be dissapointed about the no-reply, because the device is considered old and only few people spend time for it nowadays. Just smile and be positive...
I hope I helped!

First aid thanks
Now I have this
ERROR 244 INVALID MODEL ID
This update utility cannot used for your PDA phone.please check your update utility
Now what help please:crying:

2nd attempt
skorpionxxx said:
Now I have this
ERROR 244 INVALID MODEL ID
This update utility cannot used for your PDA phone.please check your update utility
Now what help please:crying:
Click to expand...
Click to collapse
I would suggest downloading and trying to install other shipped rom's from the same website. There are lots of versions/languages in there. I think that you should try the one for your preferred language.
As for me I installed the WWE because there was no rom available in Greek but I don't mind at all
There is another WWE one in "Advantage", on the devices list. Give a try!!