Related
Hi everybody,
I completed some tests using my bluetooth car kit (Audi integrated BT MMI car kit). Here is what I saw :
With the original french ROM (1.18.256.2)
Outgoing calls
90% of the calls were interrupted during dialing or connection. The main problem was UMTS stability with the french mobile operator named SFR. After deactivating UMTS/3G and falling back to GSM, 80% of the calls were interrupted during the first minute of communication because of BT unstability.
Incoming calls
Impossible to take a call : half were immediatly interrupted, half were answered using the internal micro instead of the BT one.
With the JasJam ROM (1.20.305.3)
Outgoing calls
After deactivating UMTS/3G support all the calls are stable. Every thing is working fine and the Audi BT car kit works just fine !
Incoming calls
Still impossible to take a call : quite all are not well handled. BT is still unusable to take calls.
I don't think the BT car kit is the problem, because I am using it every day with a Qtek 8310 (Tornado) and both incoming and outgoing calls are well handled.
If you've got some experience, please share it. I am so disapointed that this marvelous TyTN cannot replace my Tornado, only because this "merdique" (<------ french romantic word ) bluetooth functionnality is not working ! :evil:
Arnaud.
Hi Arnaud,
I too have problems - see:
http://forum.xda-developers.com/viewtopic.php?t=61594
Paul
Im also having problems with carkit.
Jasjam and kjam just dont connect with my carkit (while they pair with it) but Jasjam and all nokia / samsung phones work perfectly well with it. Even Palm treo 650 works.
Is this a problem with iMate sets or with Windows Mobile 5.0?
I've had a friend who also has a TyTN which we tried in my kit and it didn't work. It seems that users with other variants (e.g. Orange) don't have this issue?
Further (non-technical) tests have shown that if you answer or make a call, you can get the audio by going into the call menu and choosing "Turn handsfree off". My uneducated guess here is that there is some issue with the headset feature on the TyTN and by doing this, it resets the headset profile and bingo!
It is a pain in the ar$e doing this for inbound calls, but for outbound it is manageable - you simply dial the number and whilst it is connecting, do the menu->Turn handsfree off workaround. Hopefully the new ROM will fix it - when it arrives!!
Hi All,
Just to put in my experience.
I have an Audi A4 with a Gen II car kit. As there is no handset holder for the TyTn I am using the Bluetooth function.
I have the Orange SPV M3100 variant, which works absolutley fine with the Audi Bluetooth, with one problem....
As I don't yet have a car charger, when the phone goes into sleep mode, it appears to disable bluetooh (I occasionally get a 'BT OFF' signal on the car display). Switching off bluetooth, then switching on again on the phone tends to kick it back into life where it stays live for another ten minutes or so until the phone dozes off again..
I have heard of a few people who have also diagnosed the problem as possbily the phone going to sleep to conserve battery, and solved the problem with an in car charger. I will report back when I have a charger.
Again, I do not suspect the Audi car kit as I have previoulsy used this (on Bluetooth) with a Nokia 6230 and MDA Vario, with no problems at all (the Vario was externally powered from the car).
Maybe you TyTn owners can flash to the Orange ROM ;-)
Same Scenario Different Cast
I have a Lexus GS with BT.... here's my Undesired results
actually, the only Problem i am having is very annoying.
If i receive or make a call after i pair with the Car kit, EVERY Thing is fine,
The sound quality is good, the response time is good (no Delay).
BUT after that call is ended, the BT itself on the jasjam TURNS off...
so i have to turn the BT on After EVERY Single Call (either made or received)
Is this Normal, I don't think so, but i had to ask
I have the Original Ship ROM Arabic version
My BMW handsfree works just fine with my TyTN. No issues other than an occasional BT off (loss of pairing). Interestingly, it's not sleep mode related since it usually works just fine in that mode. Generally, disabling Bt then re-enabling it re-establishes the connection then all is well. I have no issues making or receiving calls.
No doubt CarKit issues will be addressed when HTC releases their ROM update. Recent information tells me that this update is pretty much guaranteed to be an AKU3.0 variant. There's a tremendous amount of BT stack improvements in this AKU that should improve this as well as A2DP bluetooth issues.
.. No issues other than an occasional BT off (loss of pairing). ..
Interesting! I have the same issue with MTeoR.. I wonder if MteoR and TyTn are based on the same HTC device PLATFORM.
Updated my Parrot CK3100 to the newest version and things still don't work too well. When I start a call on the Parrot it takes around 20 seconds to start dialing on the phone, and when I receive a call I have to pick it up, place it on hold, and retrieve from hold to be able to hear the other side.
I wonder what/why they changed in the Bluetooth stack, it worked perfectly on my Wizard...
Renault Laguna II integrated BT kit
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
rmorby said:
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
Click to expand...
Click to collapse
Try installing Jetware mobile extender, that adds signal and battery bars as well as network name.
I enabled Remote SIM Acces in the Bluetooth Menu and now my contacts sync on my Audi Bluetooth Car kit with WM 6.1.
Hi,
I have a Vodafone P3600 which I had unlocked and flashed to test both HTC WM5 and Faman WM6 3.3 and 3.4. I have a problem using it with my Parrot CK3100, and it's the following: devices pair perfectly, but when I leave my car and then return, most of times P3600 does not connect with handsfree. Sometimes, it does connect, but after a long time. This occurs with any OS version I have tested.
A problem with CK3100 is discarded because I have flashed it with latest software version, and it was tested with a HP RW6815.
I tried disabling power saving, setting bluetooth as discoverable, installing Jetware, but nothing made it work as it should.
I'm near to sell my P3600 and buy a new HTC Touch only to solve this problem, because I need much a handsfree working in my car.
Can any of you give a hint of what the problem could be?
Thanks.
I forgot to say that if I power on my HTC, it always connect to the Parrot. But when it's in standby sometimes connects and others no.
I have an SonyEricsson HBH-DS200 and this works unfortunately with the P3600 also in a from you described way. I tryed AWE and PDAVIET and also AX3L ROMs.
Other points and problems with BT HandsFree are:
1.) A litle icon to show that the BT HansFree is connected will be showed in the status only after the first paaring. After that, nothing shows you, that the BT HansFree is connected (and therefor can be used) or not.
2.) After a phone call the BT HandsFree will be disconnected.That meanns, that I can not hear the phone ring in the earpice. I only hear it from the P3600. I have 2 choises after that:
a.) If I push te Answer button on the P3600, the voice is on the P3600.
b.) If I push the Answer button on the BT HansFree then the voice is on the BT HansFree (but it will be disconnected after the call).
3.) The volume can not be changed if I use the BT HandsFree. That means, the volume slide bar can be moved/changed, but this has no effect to the volume in the BT HansFree.
In my opinion if the paaring is done and the BT HandsFree is switched on it should be always:
- connected
- an icon in the status line appear
- the voice in the BT HandsFree - independent if the answer button is pushed on the phone or on the BT HandsFree
For me is the BT HandsFree very imortant, and I am a litle bit disappointed, that a device for 500 Eur works that buggy with a technology that is almost 10 year old.
I have now tried 3 different bluetooth headsets with my AT&T Tilt with Stock Rom. First was my BlueAnt V12 I used great with my RAZR then I bought a Motorola S705 now I have Sony HBH-DS980.
With the BlueAnt V12 the audio was low and tinny and couldn't hear the caller
The Motorola S705 sounded good minor choppiness but the callers couldn't hear me worth a damn. Both of these devices paired great and kept connection, only the Motorola would loose connection if I got a system alarm or if I was streaming music. For just handset operation it worked great. With the Sony it seems to be a crap shoot when they are going to work. I installed JetWare to enable Caller ID Name and Ringtone through headset and when I pair them the first time they work great all day long. However if I turn bluetooth off on the phone and then back on I have issues with disconnecting and sound not going through headset for calls.
So I installed the new Official AT&T Rom from HTC's Site the other day hoping the bluetooth improvements they made would help. I decided to try JetWare again just to see if it worked, again I started having problems again. So I hard reset and didn't install the JetWare Extensions. For the first day everything worked great. Next day I fired it up it's up to it's old tricks of disconnecting after a call.
Anyone else having these issues? My state is going to be bluetooth only while driving in about 4 months so I really need bluetooth to work.
Can you charge the sony ds980 via usb?
No it has a real strange plug for charging
Hi, I have the Sony Ds980. I've experienced similar problems in the past.
check your Bluetooth settings on the phone: communication manager --> Settings --> bluetooth. Select your device (ds-980) but don't double click on it. and then check its mode: in that window, ensure that you have checkmarks in both options (i.e, Turn on bluetooth & make sure this device is visible to other devices). Sometimes, when you restart your bluetooth headset, the second option is left unchecked, thus causing disconnections between it and the device.
another option is to trigger the headset button. sometimes, when a call comes in, I would have to do this once or twice before it connects.
I think it is a bug.
i have the Jetware extension and MSVoice, and they help with the caller ID.
HTH,
rgds, Manny
I'm trying to decided between the DS980 and the Moto S9.
I'm so tired of wasting my money on crap.
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
dalavar said:
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
Click to expand...
Click to collapse
Well, that does it for me. The DS980 is officially off my list.
Finally, i got my HD today. Everything is working fine, except for one thing.
I'm not able connect with my bluetooth carkit. I've tried severall things: Carkit searching my device, which was visible and device searching for carkit. Both without success
Anybody an idea what i'm doing wrong here?
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Acelister said:
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Click to expand...
Click to collapse
What do you mean with a power cycle?
I turned the device several times off. Performed several resets. No luck. The carkit is working fine with my old HTC 3600
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Got my HD yesterday, was able to pair Motorola S9 BT, both in headset and A2DP and listened to podcasts via RSS HUB. Today, nothing works!!!!
Tried soft-rebooting HD and restarting headset to no avail. HELP!
blackb1ade said:
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Click to expand...
Click to collapse
Same problem here. I was able to pair my HTC Touch HD with a JVC KW-NX7000 radio/Nav. On the display of the JVC I can see the batterypower of the HTC and the signal of my provider (Vodafone). My adresbook is transferred to the JVC, I can place a call from my JVC and then I get an error. When I turn on the screen of the HD Touch HD and then place a call on my JVC everything works fine. The problem seems to be, that the screen of the phone doesn't turn on when I place a call. When I dial a number on my phone, everything works fine.
I hope that someone has an answer to these problems.
I thought the problems had to do with the JVC but now I have my doubts.
Today I removed my bluetooth-connection and tried to make a new connection between my HTC Touch HD and the JVC KW-NX7000 radio/navigation in my car. On top of the screen of the HTC I saw two icons appear. (Left from the 3G icon)
I was surprised to see everything work, even though it was just for a short period. I could place a call from my JVC, the screen on my HTC turned on, the number was dialed and I got connected. At some point 1 of the 2 icons disappeared and again I wasn't able to make any calls from my JVC. The problem has something to do with those 2 icons which (should) appear when you make a bluetooth connection. I hope that somebody can help me with my problem.
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
james00000007 said:
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
Click to expand...
Click to collapse
Got excactly the same problem. Tried A2DPToggle but that thoes not work on my T-HD. Hope someby knows a tool or an answer for this.
absolutely agree , bluetooth is buggy !!!
sometimes I am loosing the connection to my car , sometimes it worked fine for hours , sometimes only for minutes
if I am listening to music (ds980) and receive a call, the connection to hear music is lost after closing the call
if I have some longer calls, sometimes the connection drops
so at the moment bluetooth @ HD is absolutely not stable !
buggy BT still happening?
Had issues with Nokia E71 randomly dropping/reconecting BT ... sometimes dropping during a call ... sold it on eBay
Brought Omnia i900 - Voice over BT headset does not work ... (but now a fix has been found over at modaco.com so happy)
was seriously looking at touch HD but will not if this thread is correct as sick of paying out good $$$ and finding a must have feature is not working
Q. has a fix been found or is BT still buggy
thanks
Bluetooth Problem
I think the problem may have something to do with multi-function devices (make and receive calls + stream music) I'm having problems with my Jabra
SP700 ,pairs no problem , 2 icons in top bar , can make calls and play music. Switch off phone or Jabra and then reconnect I can only make calls, no music, even though the 2 icons are displayed in top bar. I also have a Sony Erricson external speaker and a pair of Sony headphones both of which work fine no problem. Is this something that can be fixed with updated bluetooth drivers for HD?
Hi there,
Finally I assume I found out why some people have problems with their unit using BT and others not.
Those, who use BT headsets only (not stereo) and don't use the AD2P and AVRCP Profile don't have any problems. (I can confirm this - tested it with HBH-660 and Motorola without any troubles!)
And those people who have a stereo headset like the HBH-DS980 (which I own personally) and/or do own a car radio that can receive AD2P signals to transfer Stereo sound, face with the BT disconnections while listening to music and/or during a call or just right after...
So I think SE should solve this issue quickly as it seems to be a problem in WMP 6.1 in accordance to X1 hardware with AD2P / AVRCP profile devices.
So I start a poll for anyone who could confirm this or not !
BTW: I am using the Generic AT ROM but this BUG is affected through all other ROMs too, so that shouldn't matter -
Thanks,
Freako
My kenwood headunit uses avrcp and a2dp and works fine.
There was a discussion on this issue already and it does exist w/ my AT&T Tilt (Kaiser) as well w/ all the A2DP headsets I tried (SE DS220/205/980, JVC BT-1, ClipD R Radio, Jabra (forget what model)) so far
I believed the bluetooth issue that R2A fixed is another one where BT will turn itself off if not use for a while.
The 'turn off' issue is still there with mine! I had it only after 2,3 days but then continuously turn off by itself! Now, still happening! Generic_UK R2A
Generic Swedish R2A.
No problem for Bluetooth! But when I softreset x1 via spb mobile shell panell it crashes on boot.
jackleung said:
There was a discussion on this issue already and it does exist w/ my AT&T Tilt (Kaiser) as well w/ all the A2DP headsets I tried (SE DS220/205/980, JVC BT-1, ClipD R Radio, Jabra (forget what model)) so far
I believed the bluetooth issue that R2A fixed is another one where BT will turn itself off if not use for a while.
Click to expand...
Click to collapse
Yes absolutely Jackleung, you're right, the new firmware should have fixed the automatic turn off of BT only, but I belive what michaelthemage said, that it still exists after his UK firmware update so do I - today the BT icon dissapeared suddenly - so it was turned off automatically ... very curious...
Anyway, Jackleung, you say that this problem was present in earlier WM6 machines like the Kaiser? As far as I know I did not try a stereo BT headset on my previous Tytn II but you say it seems to be a bug in WM6.1 in general, right ?
Very interesting that trinode doesn't have these problems with it's Kenwood headset - maybe I give it a try if it isn't too expensive -
On the other way Persian Boy links it with the SPB Shell - I do have the standard SBP Panel that you can download from web. Maybe I should uninstall it and try again - maybe the SPB panel makes these troubles? Personally I can't imagine, but will try anyway -
So far,
Freako
trinode said:
My kenwood headunit uses avrcp and a2dp and works fine.
Click to expand...
Click to collapse
Can you please tell me the exact brand of this headunit by kenwood?
So you did try transferring music to the kennwood radio and there were no problems like sudden disconnections or so?
Thanks,
Freako
Freako said:
Yes absolutely Jackleung, you're right, the new firmware should have fixed the automatic turn off of BT only, but I belive what michaelthemage said, that it still exists after his UK firmware update so do I - today the BT icon dissapeared suddenly - so it was turned off automatically ... very curious...
Anyway, Jackleung, you say that this problem was present in earlier WM6 machines like the Kaiser? As far as I know I did not try a stereo BT headset on my previous Tytn II but you say it seems to be a bug in WM6.1 in general, right ?
Very interesting that trinode doesn't have these problems with it's Kenwood headset - maybe I give it a try if it isn't too expensive -
On the other way Persian Boy links it with the SPB Shell - I do have the standard SBP Panel that you can download from web. Maybe I should uninstall it and try again - maybe the SPB panel makes these troubles? Personally I can't imagine, but will try anyway -
So far,
Freako
Click to expand...
Click to collapse
The problem I am talking about is A2DP/Headset disconnected after phone call, and I have to re-connect it after that. I don't thinks it's WM6 or SPB panel issue since only HTC devices (X1, Kaiser w/ no SPB install) have this issue. My other device Asus P525 (WM6/6.1 w/ Widcomm bt stack) or Eten M600 (WM6 w/ MS BT stack) do not have this issue.
Is anyone with the Bluetooth problem running MS Voice Command? I'm still on R1A. I had no trouble at all using my Motorola T505 A2DP kit, but when I installed MSVC, the stupid thing would drop out as soon as I picked up a call. Uninstalling MSVC seems to have done the trick.
bedlam_au said:
Is anyone with the Bluetooth problem running MS Voice Command? I'm still on R1A. I had no trouble at all using my Motorola T505 A2DP kit, but when I installed MSVC, the stupid thing would drop out as soon as I picked up a call. Uninstalling MSVC seems to have done the trick.
Click to expand...
Click to collapse
Hi, yes I have Voice Command 1.6 on my device. It's working pretty well, but I know, what you're talking about -
Please try it with a usual BT headset (without the AD2P / AVRCP profiles!) if you have this possibility, - you'll see that it will work without any hassle.
I made this experience after I tried the HBH-660 and a Motorola headset.
Anyway - the new firmware R2A is recommended, even if the BT issue isn't solved.
But interesting to know that it seems to be a bug in HTC machines... so it will exist in further firmware updates... probably... I personally don't hope so....
No problems with the Sony HBH-IS800's and the bluetooth turning off randomly.
I have a problem with the WIFI randomly turning itself on during phone calls but no problems with anything turning off.
I have HBH-DS980 and I don't have any problems with disconnecting it on my X1 - not with R2A and not with R1A UK roms, also tested few modifided roms and there woudn't any problems too. I am also using SE MBW-150 watch and it also don't disconnect's with X1 (tested with R1A and R2A). I have BT turned on in my X1 all the time (previously in R1A rom and now in R2A) and after I turn on my HBH-DS980 headsets it will connect with them automaticly. Only sometimes I have to switch off and switch on againg BT to get connected with headsets but I think its headsets problem not the phone. But I never had a problem with suddenly disconnecting (not even once).
ell82 said:
I have HBH-DS980 and I don't have any problems with disconnecting it on my X1 - not with R2A and not with R1A UK roms, also tested few modifided roms and there woudn't any problems too. I am also using SE MBW-150 watch and it also don't disconnect's with X1 (tested with R1A and R2A). I have BT turned on in my X1 all the time (previously in R1A rom and now in R2A) and after I turn on my HBH-DS980 headsets it will connect with them automaticly. Only sometimes I have to switch off and switch on againg BT to get connected with headsets but I think its headsets problem not the phone. But I never had a problem with suddenly disconnecting (not even once).
Click to expand...
Click to collapse
Thank you very much ell82, but maybe I should describe more specifically - disconnections also happens after calls - for example, if you switch on your BT headset (in this case the DS-980), you see a symbol next to the BT symbol on the top of the phone, that indicates, that a BT headset is connected. Now, I figured out, that after calls this symbol dissapears and the BT headset dissconnects, so I have to push the button on the DS-980 again to get connected with the phone, you know? And when I get a call, the phone does not automatically transfer the call to the headset, I always have to push the button on it first, to be connected again...
And you also confirm that sometimes you have to switch the BT on and off again - this is absolutely the same with my phone.
You assume it is a problem with the specific headset DS-980 ? Maybe, but SE support told me that there is no firmware update or sth. similar for this type... what a pity -
Anyway I hope it is not a hardware bug of the phone - I haven't heard of any phone that was repaired or refurbished because of the Bluetooth bug.
Ok, so can we say that the HBH-DS980 will not work with X1 as it should do ?
This is very pity, because it is the top of thir line of headset products... and I liked it very much on my previous P1i and it worked perfectly on it...
Freako said:
Thank you very much ell82, but maybe I should describe more specifically - disconnections also happens after calls - for example, if you switch on your BT headset (in this case the DS-980), you see a symbol next to the BT symbol on the top of the phone, that indicates, that a BT headset is connected. Now, I figured out, that after calls this symbol dissapears and the BT headset dissconnects, so I have to push the button on the DS-980 again to get connected with the phone, you know? And when I get a call, the phone does not automatically transfer the call to the headset, I always have to push the button on it first, to be connected again...
And you also confirm that sometimes you have to switch the BT on and off again - this is absolutely the same with my phone.
You assume it is a problem with the specific headset DS-980 ? Maybe, but SE support told me that there is no firmware update or sth. similar for this type... what a pity -
Anyway I hope it is not a hardware bug of the phone - I haven't heard of any phone that was repaired or refurbished because of the Bluetooth bug.
Ok, so can we say that the HBH-DS980 will not work with X1 as it should do ?
This is very pity, because it is the top of thir line of headset products... and I liked it very much on my previous P1i and it worked perfectly on it...
Click to expand...
Click to collapse
This is exactly the same issue I am talking about and it's NOT specific to DS-980 alone. I tried DS-980, DS-205, DS-220, JVC BT-1, Clip-D Radio, and one Jabra model. And they all have the same issue on my X1 and Kaiser. (but not on my Asus P525 and Eten M600). The issue not happening 100% of the time but at least 80% which is enough to be frustrated.
jackleung said:
This is exactly the same issue I am talking about and it's NOT specific to DS-980 alone. I tried DS-980, DS-205, DS-220, JVC BT-1, Clip-D Radio, and one Jabra model. And they all have the same issue on my X1 and Kaiser. (but not on my Asus P525 and Eten M600). The issue not happening 100% of the time but at least 80% which is enough to be frustrated.
Click to expand...
Click to collapse
Yes, 80% of that time is ok, but the 20% lead to be very frustrated - ABSOLUTELY !!
In a time (2009) were bluetooth does exist several years and where all bugs should have been cleared over the years..., the truth shows that there still exist "minor/major?" bugs in current phones...
BT Headset problems
I can confirm that the problems with BT and HBH-DS970 are a fact - and it seems to drain the battery enormously. I have tested for a few days the PV 710 (Mono handsfree), no issue. Today with the 970 my battery was empty after 6 hours standby, and it was disconnected allthough the icon said "BT-Stereo-Headset connected! After switching it off, the icon remained. Strange, isn´t it?
I come from P1i and there was no such problem at all.
I experience the same problem. New NL firmware and a Volkswagen (Bury OEM) Bluetooth carkit. My Nokia 6500 and SE K850i work perfectly but terminating a call makes the BT connection disappear on a fairly regular base. If the other party terminates it usually stays connected
...very strange but anyway it seems that it is mainly affected with AD2P / AVRCP devices - I hope it is just a software/firmware bug that can be fixed easily and not caused by a hardware failure....
Sorry guys but again I have to say it doesnt effect on my X1 and DS-980, never and I'm using it a lot. Have you guys tried it on fresh phone, without any additional software?
ell82 said:
Sorry guys but again I have to say it doesnt effect on my X1 and DS-980, never and I'm using it a lot. Have you guys tried it on fresh phone, without any additional software?
Click to expand...
Click to collapse
The first thing after the purchase of the phone was to couple the device with the DS-980 headset and the bluetooth issue was really not expected and made me angry and at that time I didn't have any extra software on it...
When did you buy your headset ? I bought mine approx. 1 1/2 years ago...
Maybe the current items go better with the X1?? I don't know.
But we found out that this issue was also caused in other Windows Mobile devices like the Kaiser, TyTn etc.
The poll shows significantly that there are still some who have troubles with bluetooth, even after update-
AND now we can ask them if any of you have tried the headsets with clean and fresh install ? (Xperia X1 without any additional software, even without sbp panel, etc...! )
I am curious...
Freako