Hey there,
so i bought a i mate jasjam second hand, worked fine when i got it. after 2 days of using MSN on it and SMS i had the thing just die on me, like while typing on MSN the phone would loose all power. and the screen would fade away to nothing.
i thought oh battery must be dead and tryed charging it... nothing. no charge light (red orange or green) phone is 100% dead. opened the back up, checked for loose connections. etc. everything seems fine i have left it for a few hours with no battery, few hours with the battery, tryed charger only, leaving it plugged into the charger without a battery etc
still get no where.
any ideas?
(i am new to the forum too. so sorry if i have made any posting mistakes.)
the answer
my dear whenever you wouldn't be able to charge your Jasjam you have to reset it as it plugged to the charger then your device get charge surly .
Plug into the wall without a battery. If you see a red led light up on the front, its recoverable. If not, its only good for spare parts...
Related
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
I bought my Orange M3100 about 60 days ago and it has been working well until today. Last night I plugged it in to get charged and this morning I noticed that my alarm didn't go off. When I looked at the phone I saw that the charge light on the phone was red; I had never seen it red befor. When I tried to turn on the phone....Nothing, I tried to do a soft reset, hard reset, remove the battery and the sim card put them all back in....still nothing.
I tried hooking it up to the computer, car charger, wall charger and still nothing. The only time i get anything is when i plug it into power and even then the only thing i get is a red LED light at the top of the phone.
Does anybody have any ideas as to how to fix it??
I really appreciate any help as I paid $575 for this phone 2 months ago.
Thanks,
David
bigtal said:
I bought my Orange M3100 about 60 days ago and it has been working well until today. Last night I plugged it in to get charged and this morning I noticed that my alarm didn't go off. When I looked at the phone I saw that the charge light on the phone was red; I had never seen it red befor. When I tried to turn on the phone....Nothing, I tried to do a soft reset, hard reset, remove the battery and the sim card put them all back in....still nothing.
I tried hooking it up to the computer, car charger, wall charger and still nothing. The only time i get anything is when i plug it into power and even then the only thing i get is a red LED light at the top of the phone.
Does anybody have any ideas as to how to fix it??
I really appreciate any help as I paid $575 for this phone 2 months ago.
Thanks,
David
Click to expand...
Click to collapse
There have been other instances of this problem. I had it once and it eventually came back after lots of fiddling. The last thing I did was to leave the battery out for half an hour - whether it was this that corrected fault I don't know. The issue ssems to be around the battery or circuit that monitors battery. I've not heard a definitive solution other that time!!
Edit: Also not unique to Hermes - seen this on several other phones PDA or otherwise.
Mike
Thanks for responding. I will try that now and let you know if it worked.
**Keeping my fingures crossed**
This happened to a wizard. really frustrating. I just had to exchange. But my m3100 ha sissues charging. sometimes when I plug it in it will behave like it is not plugged in. I fiddle with the plug and wiggle it and nothihng. let it sit and then on comes the charge light...but then some times it goes out. really wonky and scary cause I too paide 650 for my hermes and can't ecahnge it with my provider
Well I waited only 30 min and that didn't work...I will try 2 hours and hope it fixes the problem....
bigtal said:
Well I waited only 30 min and that didn't work...I will try 2 hours and hope it fixes the problem....
Click to expand...
Click to collapse
Darn!!
Curiously had this exact issue with a cheap office mobile a few weeks ago. Nothing would work. As it was chaep I took it apart- nothing loose or such like, put it back together and worked straight off. Not that I'm suggesting you try that!
I still think it will come good but what a frustrating wait. One post I saw was from someone whose TyTN never charged from the day he got it. How's your warranty/guarantee situation?
Mike
Well I am in the US and I bought it from a guy in the UK. I have sent him an email but didn't get a response. I am not sure if Orange in the UK will honor the warranty. As I said it is only 60 days old.
It is very weird. I think I will go to my local Cingular store and try a new battery, maybe that will help. I would rather it be a battery issue than something with the phone itself.
bigtal said:
Well I am in the US and I bought it from a guy in the UK. I have sent him an email but didn't get a response. I am not sure if Orange in the UK will honor the warranty. As I said it is only 60 days old.
It is very weird. I think I will go to my local Cingular store and try a new battery, maybe that will help. I would rather it be a battery issue than something with the phone itself.
Click to expand...
Click to collapse
Sounds like a good idea. (guy in the UK - not a scotsman I hope!!)
Check this link. I know he's talking about car charger but the bit about having charger plugged in whilst soft re-setting might be interesting. Second last post page one:
http://forum.xda-developers.com/showthread.php?t=277742&highlight=reset
EDIT Just tried having mine plugged into charger and removed battery. Light instantly goes red. Suggests your problem most likely battery and not device. Might be worth trying also taking battery in and out whilst connected to charger.
Mike
Mike - Thank you for your help in this issue and the suggestions....looks like we are getting closer to a solution.
I don't have my wall charger here at work but i connected it to the PC USB cable while the battery was OUT, then I poped the battery in and the red light changed to Amber to indicate it is charging. The phone powered up after a soft reset. The battery shows 0% charge even though it was plugged in all of last night. It now seems to be charging, I will wait to see if the battery holds the charge or not.
Now I don't know if the problem is with the battery, charger, or phone
I guess I will be able to narrow it down in a few hours and see if the battery holds a charge.
bigtal said:
Mike - Thank you for your help in this issue and the suggestions....looks like we are getting closer to a solution.
I don't have my wall charger here at work but i connected it to the PC USB cable while the battery was OUT, then I poped the battery in and the red light changed to Amber to indicate it is charging. The phone powered up after a soft reset. The battery shows 0% charge even though it was plugged in all of last night. It now seems to be charging, I will wait to see if the battery holds the charge or not.
Now I don't know if the problem is with the battery, charger, or phone
I guess I will be able to narrow it down in a few hours and see if the battery holds a charge.
Click to expand...
Click to collapse
Brilliant!!!
Sounds good. so the secret here maybe, taking battery out and in whilst connected to charger or usb?
I'm confident it will hold charge and things will be fine as mine is.
Like I said earlier it takes time and in the end it works fine again, BUT what precisely caused it to work again so we can help others? Because like me you've tried quite a few things.
Mike
I just hope that this will not be a regular issue.
What finally worked was:
1) Remove battery
2) Connect phone to charger or USB (USB in my case)
3) Insert the battery while phone is connected to charger
4) Red light should turn Amber
5) Soft Reset
In the 20 minutes or so that it has been charging the battery went from 0% to 10%
bigtal said:
I just hope that this will not be a regular issue.
What finally worked was:
1) Remove battery
2) Connect phone to charger or USB (USB in my case)
3) Insert the battery while phone is connected to charger
4) Red light should turn Amber
5) Soft Reset
In the 20 minutes or so that it has been charging the battery went from 0% to 10%
Click to expand...
Click to collapse
That sounds positive. Well if my experience is anything to go by I've only had it once in 4-5 months.
With your permission I think this may be worth a spot on the Wiki. I'd be happy to use your points above and also Cieplowski's points which appear similar but have a couple of other observations, and put these up as potential answers to this not uncommon issue.
I would not do this until over the weekend just to see how you get on, though I have every confidence.
Mike
I think putting it on the wiki would be an excellent idea.
Right now it is at 70% charge so things are looking good....
I will post back on Monday and let you know how the weekend went
Thanks again,
Dave
I put my phone (T-Mobile MDA VARIO) on charge last night before I went to bed, nothing strange about that, but this morning the phone was completely dead ,wouldnt charge, no lights, wouldnt boot etc.
After searching this forum I found what I thought was the fix for a dead battery (3 AA batteries/wires etc) I did this and the phone now boots and says its chargeing, but only if I charge using USB, it wont do anything if I use the wall mains charger
If I take off the wires/AA bateries, the phone shuts down and wont charge, but as soon as I put the wires/batteries back on it works as normal.
While the phone is running I looked at the power application & it shows the battery chargeing, but wont hold any charge at all
obviously I cant walk around with 3AA batteries & 2 wires attatched to my phone.
does anyone have any suggestions please
cheers
Phil
I'd look into a new battery...
If this were a notebook battery I would say the cells had collasped.
exact same thing happened to me last night. I think there is an issue with charging the wizard when its off, like it doesn't know when to stop charging and it overloads the battery. Do you happen to have the link for that 3 batteries and the 2 wires trick, I want to give it a go. Thanks.
2 days ago i had my cingular 8125 plugged into a charger . when i woke up it was off and dead, still plugged in?
now when i plug it in (to the stock charger) the red light comes on, but if i take the battery out, it stays on. if the battery is in, it is on. but i cant turn it on. ive left it for 15 hours now, and still nothing
even tried another battery.
when i first put the other battery in it turned on, was booting, but then died. probably cuz the battery was dead. but i had it plugged in as soon as i turned it on.
now the same thing happens.
any ideas?
i also thought i smelled something burnt. like if you have ever had a laptop that had a bad a/c connector and would heat up a bit, or even smoke!
dont know if it was my imagination or what?
thanks in advance
dan
T mobile MDA shows RED LED
that is strange that you post this today, because I just received T-mobile MDA unit from 3bay that has a similar problem.
-The phone does not turn on when I press the power button.
-It does not respond to a soft reset or a hard reset.
-With the battery in, I connect the AC charger to the phone and for about 1-3 seconds the charging LED color is RED. THe LED turns off and I can not get the same result if I reconnect the AC charger.
The only visible sign of life this MDA unit has is:
-with the battery out and the AC charger connected, when the USB is removed to the point where it is not connected to the MDA, the charging LED light flashes red for a split second and the screen flashes white for a split second as well. [I hope this is a sign that there's still life in this MDA, but i'm thinking my unit is truly a brick..]
From all the websites I've searched, this does not seem to be an issue, although for me it is a scary one! Anybody that can help would be much appreciated because I want a working MDA not a dead one
EDIT: It turns out my non-booting MDA was due to a faulty vibrator and flashlight MDA part. After removing these two pieces that are connected to the back cover of the MDA housing, the MDA booted up with no problem.
danrw84 said:
2 days ago i had my cingular 8125 plugged into a charger . when i woke up it was off and dead, still plugged in?
Click to expand...
Click to collapse
I'm in exactly the same position - left phone on charge overnight two days ago and in the morning it was completely dead. I have managed to get it to power on for about 2-3 seconds on one or two occasions but now it won't do a thing
Not sure if this will help, but have you tried to push that soft reset button that you have to to push with your stylus when it is plugged in?
Sounds stupid, but my power button is completely dead and I thats how I have to start mine up. I also have to pop out the SD card to get the screen to come out of sleep mode!
I might not work, but hey...worth a try.
Well, I eventually got back up and running. Turns out the battery was completely dead. I used the 9v battery trick and then used my USB charger to get the battery fully charged and all is well.
This leads me to query how do I now charge my phone when I don't have access to a PC? I was using a standard AC wall charger and the phone showed that it was charging but due to the fact that the display stays lit whilst on external power, this eventually killed the battery as the charge indicator appeared to be false.
*as posted verbatim in another thread*
WHAT IS THIS 9 VOLT TRICK YOU SPEAK OF?!?
funny...i'm having the same problem with 2, what were perfectly fine, wizards.
which is what brought me to this forum post.
These two devices were turned off and sat in my desk for months as they were not needed. They were perfectly good, successfully unlocked and upgraded from the advice/steps/tools provided here (thanks!). They were my primary personal and work devices until i was given the option to try a few iPAQs.
Now that I want to go back NEITHER device will boot. On the original chargers (both wall and usb) both devices will display the red light as shown in the pic above, will not boot normally, or via the 2 or 3 button methods common for these devices. The batteries do not get warm, which tells me that they are not getting current...which makes NO sense if i'm using 4 different stock charging options (2 wall and 2 usb) in different locations. One expect some variable would work to eliminate some oddity, but nothing is working.
something odd is going here. how can 2 perfectly good devices and charges suddenly crapout? I could really believe it's the battery, but one is grand spankin new (only used for a month)! Both have the main board die? Both not recognizable on any computer?
Is it possible that the backup battery is causing this? Can it me charged same as the standard if its drained? I know i'm grasping at straws here, but this odd a coincidence.
FOUND FIX
okay..this was too simple.
for some reason the USB will not provide enough"juice" to pop these out of their sleep.
I have been using this great little charging system made by good old Radio Shack that is a single plug with different adapters for all different devices...i've been using it for my iPAQ's, Blackjacks, BB's, ect. SO as a last resort i went and got the CORRECT adapter (as there are many mini usb adapters available) and SHAZAM!!! they boot right up!
don't ask me why the stock wall chargers will not work, but these RS iGo systems are the trick!
i'm going to link to the other similar issue in hopes any other folks having the same issue can benefit from this.
Hi guys!
I know, that there are some threads about the topic, but i think, here it is a bit different...i´ll describe:
Everything was OK with my withe G1, since I forgot to recharge the battery, and the G1 switched off. I wanted to recharge it, but - you know- the red led light blinked...i read different threads etc, and then I decided, to buy a new battery. The new battery arrived yesterday, and I put it in my G1, tried to switch it on, and it worked. I was quite happy! I taped it on the charging unit, and the first problem: the battery display didnt moved, it remained at 23%, also after a few hours at the charging unit. I knew the problem, because it was the same with my old battery, but it doesnt interest me, because the battery recharged, only the battery indicator showed that not. I thought OK, dont thinked about it, and waited. Today: I took my G1, yes, battery display at 23%, no problem. I switched it off and after a few hours I wanted to switch it on. Second problem - F**K! The red led light blinked...and now, the battery doesnt recharge at all. The G1 works now only, if the charging unit is put on it, if I remove it, the G1 switchs off. Its the same behavior with the old battery.
I dont know what to do now, because i dont think, that it is a hardwarebug, because yesterday it worked, with the brandnew battery. Or is it possible, that the G1 destroys my batterys while switching it off?
I hope, that there are solutions for this...because im loosing my temper slowly...
Can you charge the battery if the phone is off? Red led light should show. You should wait even 30-60 minutes for this - it depends of battery discharge. If the red light will not show this will means that your hardware is broken (phone or phone charger). You can try use another phone charger to test.
That works sometimes....at the moment not, but one hour before, yes.
I had the G1 with the USB cable on the PC, the phone was off, the light was red (not blinking). I waited about 50minutes, then disconnected, tried to switch it on - nothing except a red led light - blinking
At the moment, there isnt any led light, if i connect the phone to the charger unit or the PC...
It looks like hardware problem :/
Would be OK, because there is still warranty.
But what irritates me, is, that it worked without problems, when the battery was charged. Also with the new battery...worked good, since I switched the phone off.
I only want to be sure, because the return merchandise authorization (rma) takes quite long time...
I have the same problem. last week i bought the phone, and used it till the phone battery was empty. I tried to recharge the phone, but i wouldn't go on, only the red light blinking. I had the phone charged for 2 days, with the og charger, no result. Looked like the phone was dead.
Today i tried it again, still no result. All of a sudden the phone turned on and was charging. It is now on 99%.
Should i contact HTC?
edit:
sorry, wrong forum
Just a wild guess. It could also be the ROM that you have. I had a similar problem with my battery drained out like that with flashing red light. Come to find out later that it was something to do with the ROM (CM6.x) that I was using.