SPV C500 - RED LIGHT! :( - HTC Typhoon

My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?

Related

universal dead?? HELP red light!!!!

Hello, earlier today i felt the device was very warm, i tried to switch it on but it dint respond, even to a reset. when i plugged it into the wall charger all i get is the right hand LED glowing red.
HELP!!!!!!!!!!! how do i hard reset it or get it to work again!!!!!!
i would call in orange care, but im out of the country and i really need the pda functionality!!!!
Unlucky. The 'red' light on most HTC devices indicates a serious power problem, usually it means that the battery is dead (as opposed to simply having run out of charge) or very close to death. You can probably get it working again with a new battery, if the incident hasn't damaged any other components.
i had this with my JJ after I accidently let the battery run down, I plugged it in and led went red and unit would not power on, left it plugged in started scanning the manual and web about a red led, 30 mins later, JJ just switched on and all fine.
It's worth a go and ive not had problem since
i dont think that was the case...
i have a feeling it might have been a short or something, because the unit was SERIOUSLY hot.....
nothing i did worked....until............
final time before giving up, the light was still red etc.
i figured what the heck, either way its dead and im going to get a replacement.
i then gave it fairly hard thump
the red light disappeared. i thought to myself, oh crap, i've really killed it.
then i reset it............. IT BOOTED UP!!!!!!!!!!!!!!!
and all my info still intact......brilliant.....im still going to try and get a replacement when i get back, but thank goodness.
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
afhstingray said:
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
Click to expand...
Click to collapse
Actually, it's called percussive maintenance, "the fine art of whacking a machine till it works"
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
I would recommend not using the machine too much until you can get a replacement battery if I were you. Lithium batteries will get very very hot (in some cases expand and ignite) if they are dis-charged too far. Most equipment which uses lithium technologies will have a voltage cut-off on the power input. As each cell is a nominal 3.3V-3.6V, this is often at around 3V in order to not discharge the battery too far. I would have hoped that this was a HARDWARE function rather than software. However with what you have described, if the voltage cutout was somehow disabled, then this could explain the problems.
Of the units that I have seen in the past like this, the red LED would describe the battery voltage being too low to safely power the unit (i.e. battery be dead). Generally a couple of minutes charge will bring it up to a safe working value. However, after 30 minutes this certainly should have been enough. On one of my motorola units, the battery has expanded a couple of millimeters as it starts to dissociate. It may be worth you checking to see whether the battery in your universal has distorted in any way.
Hmm the red light comes on mine all the time.
It just means the battery is low and the unit is charging. .
It should turn green when the battery is at or near optimum charge.
no....thats not the red, charging is orangy when i say red i mean PROPER red. battery is not distorted, and to the best of my knowledge the unit had a good charge, im pretty sure it must have been some kind of hardware short, and am going to call orange as soon as im back in the country.
dosent explain though why when i whacked it it started working again. the whack instantly made the light go out :wink:
i did a battery rundown test as soon as i got the unit, and posted the results on the forum, if the cut off was not working, i would have ended up with a red light then.
i dont have the manual with me now, but is there any documentation on the red light?
Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs
Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
JOEJOETHEJOEY said:
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
Click to expand...
Click to collapse
this is damn scary! Every day more people add on to the "my univ's gone dead after a small drop" community :?
When my univ was brand new, a friend of mine dropped it from a coffee bar table 3 feet high, and i still heave a sigh! Cant believe nothing happened...!
But one thing i guess we all know, its a "drop" away to kiss our device good bye :roll:
hope you get it back up and running m8! look around the forums, there are lots of breakdown-solutions threads...
cheers,
San
nice work afhstingray
do you think it was a baterry problem.
i have often used my battery till tit just ran out, from what i read in the post it seems to be a bad practice. anyway to turn off the phone
i doubt it was a battery problem as i've been using it until now without problems. (i didnt get a replacement as soon as i got back cos im waiting for this unit to get a bit scruffy before i get it replaced)
i had this once on my c500 as well, but taking out the battery for an hour did the trick. so i dont think the problem is related.
i've dropped my universal quite a few times already and im happy to say other than a few annoying dings on the metal plate with the orange logo, its working fine. and 2 of the drops were pretty bad ones too, i thought for sure the screen would die or crack. guess i got lucky and it hit the floor at an angle not too critical
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
ViaraiX said:
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
Click to expand...
Click to collapse
wouldnt it have worked if it was plugged into the AC then?
Well my Exec was dropped onto concrete at the petrol station whilst I was trying to sort out TomTom and fill up my Yamaha R6 bike at the same time :roll:
No problems, just a couple of case marks.
I guess multitasking should be left to the ladies and computers :lol:
steverae said:
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
Click to expand...
Click to collapse
Also explains why Servers are built so solidly.
When you are trying to recover a server at 2am in the morning they need to stand up to all but a sledgehammer :twisted:

i mate jasjam (HTC Hermes) not charging/fireing up

Hey there,
so i bought a i mate jasjam second hand, worked fine when i got it. after 2 days of using MSN on it and SMS i had the thing just die on me, like while typing on MSN the phone would loose all power. and the screen would fade away to nothing.
i thought oh battery must be dead and tryed charging it... nothing. no charge light (red orange or green) phone is 100% dead. opened the back up, checked for loose connections. etc. everything seems fine i have left it for a few hours with no battery, few hours with the battery, tryed charger only, leaving it plugged into the charger without a battery etc
still get no where.
any ideas?
(i am new to the forum too. so sorry if i have made any posting mistakes.)
the answer
my dear whenever you wouldn't be able to charge your Jasjam you have to reset it as it plugged to the charger then your device get charge surly .
Plug into the wall without a battery. If you see a red led light up on the front, its recoverable. If not, its only good for spare parts...

[Q] battery problem, red led light is blinking, bought new battery, no bettering

Hi guys!
I know, that there are some threads about the topic, but i think, here it is a bit different...i´ll describe:
Everything was OK with my withe G1, since I forgot to recharge the battery, and the G1 switched off. I wanted to recharge it, but - you know- the red led light blinked...i read different threads etc, and then I decided, to buy a new battery. The new battery arrived yesterday, and I put it in my G1, tried to switch it on, and it worked. I was quite happy! I taped it on the charging unit, and the first problem: the battery display didnt moved, it remained at 23%, also after a few hours at the charging unit. I knew the problem, because it was the same with my old battery, but it doesnt interest me, because the battery recharged, only the battery indicator showed that not. I thought OK, dont thinked about it, and waited. Today: I took my G1, yes, battery display at 23%, no problem. I switched it off and after a few hours I wanted to switch it on. Second problem - F**K! The red led light blinked...and now, the battery doesnt recharge at all. The G1 works now only, if the charging unit is put on it, if I remove it, the G1 switchs off. Its the same behavior with the old battery.
I dont know what to do now, because i dont think, that it is a hardwarebug, because yesterday it worked, with the brandnew battery. Or is it possible, that the G1 destroys my batterys while switching it off?
I hope, that there are solutions for this...because im loosing my temper slowly...
Can you charge the battery if the phone is off? Red led light should show. You should wait even 30-60 minutes for this - it depends of battery discharge. If the red light will not show this will means that your hardware is broken (phone or phone charger). You can try use another phone charger to test.
That works sometimes....at the moment not, but one hour before, yes.
I had the G1 with the USB cable on the PC, the phone was off, the light was red (not blinking). I waited about 50minutes, then disconnected, tried to switch it on - nothing except a red led light - blinking
At the moment, there isnt any led light, if i connect the phone to the charger unit or the PC...
It looks like hardware problem :/
Would be OK, because there is still warranty.
But what irritates me, is, that it worked without problems, when the battery was charged. Also with the new battery...worked good, since I switched the phone off.
I only want to be sure, because the return merchandise authorization (rma) takes quite long time...
I have the same problem. last week i bought the phone, and used it till the phone battery was empty. I tried to recharge the phone, but i wouldn't go on, only the red light blinking. I had the phone charged for 2 days, with the og charger, no result. Looked like the phone was dead.
Today i tried it again, still no result. All of a sudden the phone turned on and was charging. It is now on 99%.
Should i contact HTC?
edit:
sorry, wrong forum
Just a wild guess. It could also be the ROM that you have. I had a similar problem with my battery drained out like that with flashing red light. Come to find out later that it was something to do with the ROM (CM6.x) that I was using.

[Q] Mytouch 4g died in sleep?

So, this phone was working without any problems but then my wife turned it off and left it in the drawer for about 3 weeks when she went overseas. When she got back and tried to turn it on it wont turn on. We figured it might have drained the battery so we plugged it in but now its not charging either! When I unplugged and plugged in, the LED blinked orange once but now it wont even do that either, no power, no LED, not charging either. I have tired everything, left it disconnected, battery out for an hour, then put it together and tried to charge, still nothing.
Any ideas? It is already out of warranty so talking to T-Mobile is out of question.
Nothing has been done to it, it is physically fine, it was just off for a long period and not it just wont respond.
Edit: Fixed it! I don't know what, I was almost giving up, but I took the battery out and blew hard on the battery contacts in the phone and in the charging port then plugged everything in and put it back on charger, orange light started to blink and then went solid and now its charging. I just turned it on. This phone is dodgy, no other phone hard bricks like this if you leave it off.
Some phones don't function with completely discharged battery. Actually, most of newer phones. You need to leave the battery inside and the phone connected to charger for some time, till the charging light shows up. MT4G is very far from being "dodgy", doesn't differ from many other phones that behave the same, and you were nowhere near "hard brick".
Good luck in powering up Motorola Defy with completely discharged battery.
Recoverable problem
syl0n said:
So, this phone was working without any problems but then my wife turned it off and left it in the drawer for about 3 weeks when she went overseas. When she got back and tried to turn it on it wont turn on. We figured it might have drained the battery so we plugged it in but now its not charging either! When I unplugged and plugged in, the LED blinked orange once but now it wont even do that either, no power, no LED, not charging either. I have tired everything, left it disconnected, battery out for an hour, then put it together and tried to charge, still nothing.
Any ideas? It is already out of warranty so talking to T-Mobile is out of question.
Nothing has been done to it, it is physically fine, it was just off for a long period and not it just wont respond.
Edit: Fixed it! I don't know what, I was almost giving up, but I took the battery out and blew hard on the battery contacts in the phone and in the charging port then plugged everything in and put it back on charger, orange light started to blink and then went solid and now its charging. I just turned it on. This phone is dodgy, no other phone hard bricks like this if you leave it off.
Click to expand...
Click to collapse
Had a similar problem. Phone died while using it then wouldn't light up when plugged in. Left it plugged in for half an hour wouldn't seem to charge via wall or car charger. Tried doing a hard reset with/without the battery & plugged in/not plugged in in various combinations. Got nuthin. Drove around for hours looking for a replacement or open T-Mobile place, until it got too late and I went home. Live chat with T-mobile rep was a waste of time. Plugged it in the wall and left it, as this once brought back a G2 battery that I thought was cold dead. Five hours later it was lit up and charging, showing 40% charge on the battery indicator app once I turned it back on. "HTC Sense" crashed immediately on boot then recovered. Seems to be fine so far.
- Suggestion; plug it in and leave it overnight if it seems cold dead and doesn't appear to be charging. It seems to need to hit some critical threshold before it will work again (as indicated by previous poster). Also pick up a couple spares off amazon or newegg if you don't have a second phone available.

[Q] Fixed (not blinking) red light after changing battery

Hi everyone,
a friend of mine's Nexus 4 has this strange behavior.
It went into water for about 1 second: unfortunately, she was working far from home and needed to keep the phone on for working reasons, I know and told her that the best would have been to switch it off and put in a bag of rice.
In any case, after few minutes where she was not able to listen to the people speaking, and the same on the other side (she was not listened), she kept the phone in a pocket and under the sun, and suddenly everything went fine: probably some water in the audio jack made the phone think the earplugs were plugged, and then this was fixed.
In the rest of the day everything was working, and we thought that, thanks to the hot day and the phone under the sun, the humidity has dried up.
At night when she came back home, she switched the phone off and put in the rice for the night.
The day after, she tried to switch the phone on, and nothing happend.
Screen black, no signals.
After reading something on the internet, she plugged the charger, and kept power+volume down buttons pushed: after some time, the red light appears, just one fast blink and then dark again.
So, we ordered a replacement battery (I have already substituted a Nexus 4 battery of another friend of mine), which arrived yesterday. I proceeded with the substitution, everything went fine (and I noticed that the internal water detectors are still perfect white, only the one in the sim tray is pink), but when I plugged the usb charger, again nothing happened. This time, holding power+volume down made the red light appear and stay solid, no blinking, no disappearing, until I unplug the phone, at that moment it disappears.
I let her charge the phone for the whole night, but still the same issue this morning.
What can the problem be?
It sounds strange to me that at first the phone worked and then it stopped at the first switch off (and I think that she powered off and on the phone right after the incident, and was still working) :-\
And I'm not able to understand the red light behavior...can someone help please?
Many many thanks :-[

Categories

Resources