Does anyone know how to Transfer map to PC using mapsource? I tried to copy my Thailand Streetmap V.8.10 but i get the error:
Map cannot be copied because I have no MapSource with Thailand Streetmap V.8.10 NT installed on my PC
Related
Hi,
I installed TomTom 4.4 on my MDA II with Windows Mobile 2005. The problem is that TomTom finds maps only if installed directly on the device; on storage card, TomTom says: "no map installed". Has anybody a solution for this problem?
You must put the map in the root of the storagecard.
For instance:
\Starage Card\Benelux
Hi,
thanks for your help, I could fix the problem by editing the map's path in the registry: \HKCU\TomTom\TomTom Navigator\Maps
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
DID YOU GET ANY MAP ONTO ?
i'm trying too ...
caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Hallo,
It's not possible to install maps trough .cab files.
TT has to install map related lines in the .exe file, .doc file and in the reg.
So you have to install trough setup.
Succes, Hannes 8)
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Can you please tell me how you managed to get TomTOm installed? I get the error message every time: Tomtom was unsuccessfully installed.
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
caprotti said:
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
Click to expand...
Click to collapse
can you give us a step by step process. and what versions of TT have you used ?
I installed tom tom 5.1 copying .cab files in the jasjar, then I copied the italy_plus folder in the jasjar and the program acknowledges the map ... but it asks for the activation code, saying that i must insert the disposal code (shown by the program) in a tom tom site mask. I tried but the site says that the disposal code is wrong.
I Got my TT5 working on the K-Jam! (Partially) This is what I did:
1 - TT5 did not istall properly over active sync - So I installed all of the CAB filed to my Storage Card and installed directly on the divice (I belive there are 4 files + get 1 voice file by searching the CD) I belive some the files are named ttn, GPS, etc)
2 - I emailed TomTom support and sent them a copy of my card so they can allow me to Re-activate my account (Belive they needed a copy of the card/cd, invoice of purchase and device invoice -- u can scan them , attached them, to a word file and email it to them). My code originally activated for my JAM (diff device code).
3 - I used the TomTom Map software to install the map to my PC. Then I copied the folder to my devices card via active sync
4 - when I started the TT5 -- it asked me for the activation code (which I got through ttcode.com)
5 - I activate the GPS control panel on Windows 5.0 (instructions I found on this site)
That is as far as I have gotten -- I am trying to figure out how to LINK the GPS to the K-Jam -- TomTom only lists a few coms open, but not one that the Blue Tooth lists.
Once I Figure it out -- I will post again!
Email me if you have any questions.
Hoped this helped!
In total you have to copy 4 files
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp
\TomTom\TomTom\data05.chk
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO
check www.htcclub.net for the soultion for installing TT5 and make it work ! :roll:
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my xda exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
moved to universal
not sure how this posted here but moved to universal
I had the same problem: After much teeth gnashing I found a work around:
Explore the Tomtom install CD and copy the following files your SD card:
GPS.CAB - the conduit between TomTom and your Bluetooth COM port
PIMAddIn.CAB - the conduit between TomTom and your Outlook contacts
WZD.CAB - the Today plug-in (completely optional)
TTN.CAB - the actual application and data files
ENGF.CAB - Jane's lovely voice!
On the Universal, click and install the above files in the order they are listed.
You may also need to reload the maps on the SD card, which should be done via a card reader. I used my old registered XDA2 to reload the maps from the CD. Once you insert the SD card into the Universal, you would have to activate the maps via Tomtom customer support and fax over proof of purchase for the Universal / product codes / device codes etc to gain a new activation code etc.
For the record, I have deleted Tomtom from my old XDA2!!
I hope this helps!
creynish said:
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my xda exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
Click to expand...
Click to collapse
I had a similar error on the XDAII. Creating an empty file called CurrentMap.dat in \MyDocuments\TomTom (create the Directory if neccessary) solved the problem on my device
Topic moved to Universal section.
if you download and install 5.2 from tomtom it should go straight across forget using the disc
sorted
sorted with 5.2 but still needed to input voices manaually but working fine
Tom Tom will not load
I am trying to load TomTom 5 from an upgrade pack which I bought from TomTom including all maps. This worked fine with my XDA11i so long as I copied the application CD to my hard disc but doesn't work with the Exec. I get "The application at 0x004088C3 referenced memory at 0x00000000. The memory could not be "written"". I have tried installing the 5.21 download, which installs OK on my XDA11i but says "cannot connect to your device" on my exec.
I can't find any CAB files on the disc I have. They are all zip files and if I open the zips they contain files of .001 format or similar
Tomtom are no help at all as they say the exec is not on the list of compatible machines
Hi guys!
I'm trying to install TomTom 6 on my Jamin but I can't.
I've got 2 cabs file (and the crack exe file): the installation and the today plugin.
The installation complete succesfully but when I start it up it show me that no maps founds.
I have the Italian map on the root of my SD ("Storage Card\Italia-Map") and it works fine with the 5.21 version...
:?:
Try installing the GUAM map first on the root of your SD card, this map contains the crack for all the other maps.
The file is 1 ore 2 mb only but contains the key ore crack to make the other maps working.
Good luck
old map don't work with tomtom 6, muss download new map for tomtom6.
Hi all,
Im having problems trying to install garmin on my X1
I install the program (GarminMobileXTforSymbianS60_41020.exe) from my PC and then select the remote disk (X1) and it installs all the correct files in a folder garmin which is in the SD cards directory.
But when i go to select the garmin app in 'my programs' it is not there?
There is no icon available anywhere.
What am i doing wrong?
You need to install the one for windows mobile; not Symbian.
Rob84 said:
Hi all,
Im having problems trying to install garmin on my X1
I install the program (GarminMobileXTforSymbianS60_41020.exe) from my PC and then select the remote disk (X1) and it installs all the correct files in a folder garmin which is in the SD cards directory.
But when i go to select the garmin app in 'my programs' it is not there?
There is no icon available anywhere.
What am i doing wrong?
Click to expand...
Click to collapse
you need ppc version
Ive tried another version - (2008) Garmin Mobile XT v.5.00.20
Is that right?
Can you give me an example of what i should be using
I install Garmin Que that is for ppc...it works good