Hi,
I installed TomTom 4.4 on my MDA II with Windows Mobile 2005. The problem is that TomTom finds maps only if installed directly on the device; on storage card, TomTom says: "no map installed". Has anybody a solution for this problem?
You must put the map in the root of the storagecard.
For instance:
\Starage Card\Benelux
Hi,
thanks for your help, I could fix the problem by editing the map's path in the registry: \HKCU\TomTom\TomTom Navigator\Maps
Related
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
DID YOU GET ANY MAP ONTO ?
i'm trying too ...
caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Hallo,
It's not possible to install maps trough .cab files.
TT has to install map related lines in the .exe file, .doc file and in the reg.
So you have to install trough setup.
Succes, Hannes 8)
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Can you please tell me how you managed to get TomTOm installed? I get the error message every time: Tomtom was unsuccessfully installed.
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
caprotti said:
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
Click to expand...
Click to collapse
can you give us a step by step process. and what versions of TT have you used ?
I installed tom tom 5.1 copying .cab files in the jasjar, then I copied the italy_plus folder in the jasjar and the program acknowledges the map ... but it asks for the activation code, saying that i must insert the disposal code (shown by the program) in a tom tom site mask. I tried but the site says that the disposal code is wrong.
I Got my TT5 working on the K-Jam! (Partially) This is what I did:
1 - TT5 did not istall properly over active sync - So I installed all of the CAB filed to my Storage Card and installed directly on the divice (I belive there are 4 files + get 1 voice file by searching the CD) I belive some the files are named ttn, GPS, etc)
2 - I emailed TomTom support and sent them a copy of my card so they can allow me to Re-activate my account (Belive they needed a copy of the card/cd, invoice of purchase and device invoice -- u can scan them , attached them, to a word file and email it to them). My code originally activated for my JAM (diff device code).
3 - I used the TomTom Map software to install the map to my PC. Then I copied the folder to my devices card via active sync
4 - when I started the TT5 -- it asked me for the activation code (which I got through ttcode.com)
5 - I activate the GPS control panel on Windows 5.0 (instructions I found on this site)
That is as far as I have gotten -- I am trying to figure out how to LINK the GPS to the K-Jam -- TomTom only lists a few coms open, but not one that the Blue Tooth lists.
Once I Figure it out -- I will post again!
Email me if you have any questions.
Hoped this helped!
In total you have to copy 4 files
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp
\TomTom\TomTom\data05.chk
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO
check www.htcclub.net for the soultion for installing TT5 and make it work ! :roll:
Hello there,
I just want to install TTN on my Wizard. I have all Versions on my PC.
5.0, 5.1 and 5.21 but there are serveral Problems, I was not able to get at least one of these Versions working.
5.0 -> The Installation of the gps and pim.cab went fine. But my Wizard always says that installation of ttn.cab failed.
5.1 -> Installation went completely fine. Installed PIM GPS and TTN (all to storage card) Voice Installation is also recognized by TTN but it states that it can't find my Map
5.2 -> The same Problem as 5.1
My Map is installed to \Storage Card\Deutschland-Map\
Also tried to put a CurrentMap.dat containing "& \Storage Card\Deutschland-Map\" to \My Documents\TomTom, but that doesn't help
Can someone help me?
Now installed TomTom Navigator 5.1 again (to Device Space) and got working the Benelux map at one, but still the device doesn't find the German Map. When i delete the Benelux Map TomTom again doesnt't show the German Map at all and instead says that it can't find any map...
By the way...has someone found a way to install TTN 5.2 to Storage Card? The Cabs don't ask where to install, they just load on the device space
I had the same problems, even my voices do not show up!
I followed the instuction on this link, about 5 times...
http://www.beyondthetech.com/blogs/kjam/2005/10/surefire-method-of-installing-tomtom.html
is someone here who was been able to load the german map?
I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!
The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps
Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.
just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem
Hi
Does anybody have any information on installing and getting tom tom navigator to work on my t-mobile mda vario.
Cheers
Edd
Yeah...buy the CD, insert the CD in the drive, install the software, soft reset the device and start TomTom via the shortcut that is created during the installation
Sorry for that: what exactly is the problem you are experiencing? Of you provide some more information, I can be of more help.
Regards,
--Marc
you will only be able to run tomtom 5.21 on WM2005 (unless it will "work" but no bluetooth connection on com6/7 possible) use the .cab installation files...
gps.cab / PIMAddIn.cab / ttn.cab / wzd.cab
http://www.tomtom.com/updates/navupd521.zip
1. Extract files in a folder
2. Run setup.exe
3. Do not close set up
4. Go back to the folder installation and get .cab files
Hope it will help
The main problem i faced was that i was using active sync to copy the cabs over ... use a cardreader and its cool ...
Hi All
I have just received my T MObile MDA Vario II phone and am trying to install TomTom Navigator 5. If i copy to my memory card the automatic install starts but just stops without intalling, if i try to install from the CD it just crashes.
Anybody have any idea's??
You are using 5.21 or above, right? Only these are compatible with WM5. Current is 6.03. And you have a PPC version, not Smartphone (TT Mobile). You can download the 5.21 update here
http://www.tomtom.com/support/index.php?FID=3361&Lid=1
yes, download the update and install via activesync using the updated 5.21.
This will install tomtom, but with no maps. For that you will have to use your cd and copy it into your microsd card using a card reader. For the voice, I believe I logged online using tomtom and downloaded the free voice.
Thanks guys, working fine now