I can't seem to find where to set HTTP/Socks proxy settings for applications using WIFI networking on my Xperia. Basically I'd like to do this so I can use Pandora here in Hong Kong.
Any ideas?
i asked this question before >.> no one answered ;P
Not sure but wouldnt that be dependant on your carrier. might need to look your carriers website
in opera u could try setting them manualy with "opera:config" as URL
never tried it
sitelister said:
I can't seem to find where to set HTTP/Socks proxy settings for applications using WIFI networking on my Xperia. Basically I'd like to do this so I can use Pandora here in Hong Kong.
Any ideas?
Click to expand...
Click to collapse
There's no way you can connect through a proxy with your AP. The connection with the AP (wireless connection) is established directly. If you want to use a proxy when you're connected to the wifi, it is up to the application that you use for browsing/do the networking.
For windows there's Proxycap,..etc., apps that "proxyfies" anything. I don't know if there's one for WM.
There's PUTTY for WM (ssl tunneling software), bot i don't know if this is useful for you.
According to the SE tech support, it is not possible to set up a proxy through WiFi. You need to use a browser that you can enter your proxy setting into, such as SkyFire. That is the only way I have been able to get it working.
Related
I want to use PPTP vpn connection to my work together with Remote Desktop (Teminal Service) application.
The PPTP vpn connection is established successfully.
From my work PC I can ping the pptp ip address of my PPC.
However if I switch to an application which would generate internet traffic (such as terminal services, internet explorer) my PPTP connection drops.
On my vpn server I get the logs and see the disconnect reason as "user requested)
What is the problem ?
Thanks...
hi,
I guess nobody has such experience with vpn connections.
where can I find information about this problem ?
thanks
Hi, I have the same problem more or less
see http://forum.xda-developers.com/showthread.php?t=291208
I have the same problem when trying to use Skype. My office also requires the use of a VPN (PPTP) when connecting via the wifi.
Skype connects, I can make calls, but the connection is dropped after 30s (the VPN is closed). Oddly enough, it I have the impression I prevent the VPN connection from dropping by using Pocket Internet Explorer at the same time (I have tried creating a website that automatically refreshes every 10s, but this didn't keep the VPN open). The Messaging client als shows odd VPN behaviour: it always closes the VPN, and opens it every time send/receive is selected.
I suspect not all programs keep the VPN open, even despite the fact that those programs are generating traffic over the connection.
Any hints or suggestions are greatly appreciated!
Jorg
(sorry, I can't edit posts in Opera Mini)
MarsRover: I have changed the AlwaysOn registry setting in the registry (in the folder of my work vpn). Ii appears to have changed the Messaging behaviour (but I need further testing to be sure). Tomorrow I'll see if it changed the Skype connection.
Thanks for the suggestion, if it works it ought to be put in the FAQ.
Jorg
Hi,
MarsRover,
I couldn't understand the solution. Can you explain ?
My situation is :
I am using Wifi connection to access internet. This connection is selected as my internet connection.
My pptp vpn connection is set under my Work connection.
So when I use the pptp connection I connect to Work over Internet.
But then it gets dropped if I open internet explorer.
If I set "*/*" to my intranet addresses, I have to connect to everywhere over my VPN connection. This is not good because I don't want to use VPN connection for Web browsing etc.
There must be another way ? Don't you think so ?
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Hi
You do not have to redirect all traffic through the VPN you can pick and choose under settings>connections>advanced>exceptions just add the urls you need. ie so instead of */* use the specfic range ie 10.0.0.*/* or whatever range your work uses. One more issue however if the wirless ip range overlaps the internal VPN work range you may still have isssues. ie if your wireless ip address range is 10.0.0.x and your vpn range is 10.0.0.x then even if you add 10.0.0.*/* in the exceptions it may still try the wireless link rather than the vpn link for your TS etc. If you get my drift. There is a discussion on this here:
http://forum.xda-developers.com/archive/index.php/t-217422.html
Stephen
Thank you Stephen.
In fact, I am aware of how the exception list works. I can add the IP addresses which I want to reach via work vpn.
However, I still wish that there was a way to use VPN connection manually without using an exception list.
Isn't this possible ?
mrmrmrmr said:
.... This is not good because I don't want to use VPN connection for Web browsing etc....
Click to expand...
Click to collapse
This is good for me because I DO WANT to use VPN for all network access.
mrmrmrmr said:
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Click to expand...
Click to collapse
It happens if you use settings->connections to view/change settings
hello...
i haven't a clue if this helps...
in my firm theres a cisco vpn connection... i search a long time for a programm that i can use with that vpn connection...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
futureshock said:
hello...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
Click to expand...
Click to collapse
where can I find it ?
does it connect to cisco vpn concentrator / ASA ?
there is also AnthaVPN from AnthaSoft but it's not very reliable.
PPTP
Bluefire seems to work fine with IPSec, but I need PPTP (IPSec requires NAT-T in most cases with GPRS/3G).
Hi guys,
already posted a thread in the trinity forum, but nobody there seems to know the answer. I'm looking for a way to (hard)code an RTSP proxy server in the registry. Currently one can only set a HTTP, HTTPS, Wap and socks proxy. I trie d serveral things, but did not get it to work.
I've made a a special connectionprofile called 'TV' which I set as default connection profile for HTC streaming Media. But no matter what I try, using connection manager or editing the registry, the IP of the proxy stays, but the portnumber disappears which results in a connection failure. Does anyone have the answer?
Does no one know? Maybe someone can confirm that it isn't possible?
I had similar probs which were solved since I use OpenVPN. All my internet communication is tunneled through my OpenVPN home gateway.
jockyw2001 said:
I had similar probs which were solved since I use OpenVPN. All my internet communication is tunneled through my OpenVPN home gateway.
Click to expand...
Click to collapse
is it possible to use it for only for certain protocols?
Check out openvpn.net for that. I suppose it's possible, but haven't looked into that.
Hi,
first thing I want to say, this is a very great board. Just flashed my first cooked rom on my german HTC Kaiser (t-mobile brand) and I'm very impressed by all the things the people here in the board get out of this little phone ;-)
But know I have a problem, I could find no answer for.
I am using a ssh tunnel on my device to tunnel some of my internet connections which are established through my mobile provider.
For this I'm using Mobile putty's tunnelling support to create a local socks proxy through which I tunnel my connections. The problem is, some applications like mobile outlook doesn't seem to have proxy support, so the only chance i see to tunnel them is, to tell windows mobile in the connection settings to use the proxy for all of my connections. The problem about that is, I think, then my putty would'nt be able conect to the ssh server, because it would be also forced to connect through the proxy, although it is the proxy itself (i hope this is unterstandable, because English is not my native language ;-) .
So I'm searching for a way to do an exclusion like it is possible under a non mobile windows to say for example, "don't use the proxy for this addresses", or something like freecap with tunnels applications without proxy support through a socks proxy. But I didn't find this setting nor a tool do accomplish this.
So Is there a way to do this unter windows mobile 6.1?
Another nice thing would be a tool, to dynamically switch between a direct connection and a proxy, so if there's a way for this too, I would be very happy to learn about that either.
Thanks for your help,
bcom
Hi I recently signed up for a StrongVPN 3 Country deal to give me a stable VPN connection in China. I have set up all ok om my home PC and it works fine allowing access to sites otherwise blocked here.
Then i set up a VPN connection on my HTC Touch Diamond2 I can get the VPN to connect using either IPSec/L2TP or PPTP methods, however neither Tunnel seems to allow Internet access to either MS Explorer or Opera Mobile 10 or any other internet program.
In fact when i have established the VPN connection and then start my internet explorer or any other program which needs to access the internet then the VPN connection is dropped.
If I connect the VPN tunnel on the TD2 i can site there watching it for ages so it does not seem to be dropped after any specific time frame, only when I start an internet access program. for instance if i open my Hotmail account then the VPN connection stays until the point when i tap send and receive then it drops immediately and the hotmail account then synchronise mail via the standard wifi connection.
I also set-up my home PC to allow incoming connection and then set up another VPN connection on my TD2 to allow it to connect to my home PC. but whilst i can connect to my home PC i can not surf the internet using the VPN tunnel......I had thought that i might be able to start the StrongVPN connection on my homePC and then access it via the VPN connection from my TD2 to my HomePC but it does not seem to work that way.
My objective is to use my mobile phone to be able to surf social networking sites that are otherwise blocked by censorship.
Sorry for the long post but please could anyone with advise or experience at setting these two functions up on WM 6.5.3 please advise.
Well I think I may have found out the reason for the VPN connection to drop out....I needed to change my setting in CONNECTIONS and where before i selected my GPRS or EDGE service provider i now need to change that to "My Work Network" as this is where i set up the StrongVPN connection. now i have done this change to the settings the VPN connection does not drop out when any Internet program is started.
But I still can not access the blocked websites using StrongVPN on my WM device so I do not really know if it is using the VPN connection or not.....
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
ahmadnawaz said:
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
Click to expand...
Click to collapse
StrongVPN Help desk advised me to input their DNS server settings in to the VPN account settings. I will try this when i get back to China in September. the DNS settings are found by edit the VPN account then next, next and select "Advanced" then scroll to "Servers" there you can select manaual server address and use the one that you VPN service provider recommend.
Let me know how you get on.
I have a similar problem here. I have setup the VPN in network connections but am still unable to surf blocked sites. The VPN worked fine on my PC. I have also changed the DNS setting for the VPN but no luck. But since there was no popup windows telling me whether it is connected or disconnected, how do I know the status of the VPN connection? Thanks!
to see if you are connected just tap on the top info bar then u should see your wifi connect and also your VPN connection. if you enable sound notification for connections in sounds then you will also get an audible connect and dissconnect to let u know. remember to set all your connection settings to "work connections" as i fount if not then when u open opera or other program that needs internet connection it will disconnect the VPN connection.
Thanks. I have tried that and the VPN was online. But opera was just couldn't open any page. Eighter the factbook tab in TouchFlo3D couldn't login. Any idea?
Have the same problem connecting to my home network - Remote Desktop works fine, until I open a browser on my HD2 - changing settings mentioned above didn't help...
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
scv said:
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
Click to expand...
Click to collapse
I'm not sure what you mean by "added wild cards to exceptions"....what exceptions and where on your PDA did you add them?
As far as I was aware you are only able to set up a VPN connection in the "My Work Network" connections area. then to stop your VPN connection from being dropped by any application that access the Internet, you simply change your options to BOTH use "My Work Network" then the VPN connection is used for all applications.
However that said, I still cant access blocked sites using my VPN connection with StrongVPN in China. even after setting my Server DNS to that of StrongVPN it still does not work.
Anyone got any ideas why or how to access blocked content in China on their PDA??????
VPN 10 Reply
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
WiFi BUT NO EvDo FOR VPN Reply
Quick update - I now have this working at 100% through WiFi, where I don't need it.
Any updates?
- 2 Bunny
HINT INQUIRY Reply
Any updates on this one?
- 2 Bunny
CURIOSITY Reply
Any new thoughts on this?
- 2 Bunny
APRIL Reply
Any updates on this?
- 2 Bunny
DIAMOND IN NEED Reply
Any updates on this?
- 2 Bunny
kainppc6700 said:
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
Click to expand...
Click to collapse
same here
taker2
SOMEONE ELSE HAS THE SAME PROBLEM Reply
taker2 said:
same here
taker2
Click to expand...
Click to collapse
Great. Let me know if you get any updates. I'm still stumped on this one. What ROM are you using in your Diamond?
- 2 Bunny
Hello,
I haven't found anything quite related to what I'm looking for (similar, but involving the GPRS vs WiFi settings)
I'm curious if anyone knows of an app that when you connect to a WiFi network, it will automagically set the proxy server and port required for that WiFi network? One WiFi network I use requires a proxy, but the rest do not. It's annoying to have to change it all the time. It would be great to find an app that when it detects I've connected to the wifi that requires the proxy it figures out which one I'm connected to (either via BSID, ESSID, SSID, MAC etc) and sets the proxy if required. Heck a shell script on a rooted phone could do the setting just fine, but it's the first part I'm stuck with.
Thanks!
I've been looking for an app like this too. My school makes me use a proxy but my home does not and it sucks having to change it every time I go to school or home.
Hey guys can you tell me how to change to the proxy settings. I dont mind switching back and forth but the proxy settings should work. I've my proxy set at 192.168.11.5 and port 3128. How do i use internet with that ?
reddevil0709 said:
Hey guys can you tell me how to change to the proxy settings. I dont mind switching back and forth but the proxy settings should work. I've my proxy set at 192.168.11.5 and port 3128. How do i use internet with that ?
Click to expand...
Click to collapse
Go to Settings -> Wireless and Network -> Wifi, then press the Menu button and press advanced settings.
Hey, so this doesnt do exactly what you want, but its a quick and easy thing. Search the forums, or just google "xda transproxy" I use it now, and the latest beta is very stable. Connects to my schools proxy, and everything works. Or, download orbot from the market..but i personally dont like it, too many steps to do a simple thing. But, to each their own. Anywho, just search and download, and install with your file manager of choice, make sure you set up the port, and ip address before you start the proxy. oh..and on my droid incredible, with virtous 3.1, I had to reboot before I could access the market. Your results may very.
Heres the Link:
http://forum.xda-developers.com/showthread.php?t=766569
techobsessive said:
Hey, so this doesnt do exactly what you want, but its a quick and easy thing. Search the forums, or just google "xda transproxy" I use it now, and the latest beta is very stable. Connects to my schools proxy, and everything works. Or, download orbot from the market..but i personally dont like it, too many steps to do a simple thing. But, to each their own. Anywho, just search and download, and install with your file manager of choice, make sure you set up the port, and ip address before you start the proxy. oh..and on my droid incredible, with virtous 3.1, I had to reboot before I could access the market. Your results may very.
Heres the Link:
http://forum.xda-developers.com/showthread.php?t=766569
Click to expand...
Click to collapse
Dude, that did pretty much exactly what I wanted and so much more. Before I could only use the Internet Browser but now I can use any app. I love this app.
Going to give it a try myself, thanks!
OMG Hopefully this works on my x10 android 2.1update1
thanks bro
I get no iptables found in this rom... wtf i am rooted btw
Sent from my X10i using XDA App
May need to use orbot with transproxy. To use my college wireless thats what i need to do.
Sent from my Dell Streak
murr1990 said:
May need to use orbot with transproxy. To use my college wireless thats what i need to do.
Sent from my Dell Streak
Click to expand...
Click to collapse
ok so can someone bref me all this please?
I get orbot and enable it THEN I use transproxy???????????
PS: looks like my Sony ericsson kernal locked iptables or whatever (i dont have theme)
ASProxy
I think ASProxy is what you need. For every WiFi network you connect to, you can specify which proxy to use. Besides that, it does NTLM-authentication as well, which is often required in corporate environments.
First I used TransProxy for quite some time, which is great if you only use 1 WiFi network with a proxy (you can use other WiFi networks without the proxy) and don't need NTLM authentication. Then I discovered ASProxy (found a review on android-machines.blogspot.com) which is great, if you need different proxy settings for each WiFi network.