Hi guys,
already posted a thread in the trinity forum, but nobody there seems to know the answer. I'm looking for a way to (hard)code an RTSP proxy server in the registry. Currently one can only set a HTTP, HTTPS, Wap and socks proxy. I trie d serveral things, but did not get it to work.
I've made a a special connectionprofile called 'TV' which I set as default connection profile for HTC streaming Media. But no matter what I try, using connection manager or editing the registry, the IP of the proxy stays, but the portnumber disappears which results in a connection failure. Does anyone have the answer?
Does no one know? Maybe someone can confirm that it isn't possible?
I had similar probs which were solved since I use OpenVPN. All my internet communication is tunneled through my OpenVPN home gateway.
jockyw2001 said:
I had similar probs which were solved since I use OpenVPN. All my internet communication is tunneled through my OpenVPN home gateway.
Click to expand...
Click to collapse
is it possible to use it for only for certain protocols?
Check out openvpn.net for that. I suppose it's possible, but haven't looked into that.
Related
I want to use PPTP vpn connection to my work together with Remote Desktop (Teminal Service) application.
The PPTP vpn connection is established successfully.
From my work PC I can ping the pptp ip address of my PPC.
However if I switch to an application which would generate internet traffic (such as terminal services, internet explorer) my PPTP connection drops.
On my vpn server I get the logs and see the disconnect reason as "user requested)
What is the problem ?
Thanks...
hi,
I guess nobody has such experience with vpn connections.
where can I find information about this problem ?
thanks
Hi, I have the same problem more or less
see http://forum.xda-developers.com/showthread.php?t=291208
I have the same problem when trying to use Skype. My office also requires the use of a VPN (PPTP) when connecting via the wifi.
Skype connects, I can make calls, but the connection is dropped after 30s (the VPN is closed). Oddly enough, it I have the impression I prevent the VPN connection from dropping by using Pocket Internet Explorer at the same time (I have tried creating a website that automatically refreshes every 10s, but this didn't keep the VPN open). The Messaging client als shows odd VPN behaviour: it always closes the VPN, and opens it every time send/receive is selected.
I suspect not all programs keep the VPN open, even despite the fact that those programs are generating traffic over the connection.
Any hints or suggestions are greatly appreciated!
Jorg
(sorry, I can't edit posts in Opera Mini)
MarsRover: I have changed the AlwaysOn registry setting in the registry (in the folder of my work vpn). Ii appears to have changed the Messaging behaviour (but I need further testing to be sure). Tomorrow I'll see if it changed the Skype connection.
Thanks for the suggestion, if it works it ought to be put in the FAQ.
Jorg
Hi,
MarsRover,
I couldn't understand the solution. Can you explain ?
My situation is :
I am using Wifi connection to access internet. This connection is selected as my internet connection.
My pptp vpn connection is set under my Work connection.
So when I use the pptp connection I connect to Work over Internet.
But then it gets dropped if I open internet explorer.
If I set "*/*" to my intranet addresses, I have to connect to everywhere over my VPN connection. This is not good because I don't want to use VPN connection for Web browsing etc.
There must be another way ? Don't you think so ?
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Hi
You do not have to redirect all traffic through the VPN you can pick and choose under settings>connections>advanced>exceptions just add the urls you need. ie so instead of */* use the specfic range ie 10.0.0.*/* or whatever range your work uses. One more issue however if the wirless ip range overlaps the internal VPN work range you may still have isssues. ie if your wireless ip address range is 10.0.0.x and your vpn range is 10.0.0.x then even if you add 10.0.0.*/* in the exceptions it may still try the wireless link rather than the vpn link for your TS etc. If you get my drift. There is a discussion on this here:
http://forum.xda-developers.com/archive/index.php/t-217422.html
Stephen
Thank you Stephen.
In fact, I am aware of how the exception list works. I can add the IP addresses which I want to reach via work vpn.
However, I still wish that there was a way to use VPN connection manually without using an exception list.
Isn't this possible ?
mrmrmrmr said:
.... This is not good because I don't want to use VPN connection for Web browsing etc....
Click to expand...
Click to collapse
This is good for me because I DO WANT to use VPN for all network access.
mrmrmrmr said:
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Click to expand...
Click to collapse
It happens if you use settings->connections to view/change settings
hello...
i haven't a clue if this helps...
in my firm theres a cisco vpn connection... i search a long time for a programm that i can use with that vpn connection...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
futureshock said:
hello...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
Click to expand...
Click to collapse
where can I find it ?
does it connect to cisco vpn concentrator / ASA ?
there is also AnthaVPN from AnthaSoft but it's not very reliable.
PPTP
Bluefire seems to work fine with IPSec, but I need PPTP (IPSec requires NAT-T in most cases with GPRS/3G).
hey guys,
am trying to connect to my office's VPN with my vario II. the default software provided does not seem sufficient. for one, i have one of those security key ring things which means my password changes every time i want to connect.
my pc uses cisco's vpn client...
any ideas? right now i'm just synching my exchange server with my pda using activesync, but wouldnt' midn having it on the go! there's no "external" access as such for the exchange server - it does have a web front end but its highly customized and isn't as easy as just configuring it as an external data source on my pda...
This one works perfect for me..
http://www.ncp.de/english/download/testsoftware/index.html
We use AnthaVPN at my university and it's supposed to work quite well with Cisco concentrator gateways, but be warned, if you have the latest 3.3 aku, you might run into problems like I did regarding loosing 3g internet connectivity on your hermes. However it could have just been a fluke as I didn't bother trying a fresh install of antha after a hard reset or anything since 3g is just as fast as my universities wireless internet anyways
Hope this helps
You can also try Bluefire. They have a 30 day fully functional trial version.
Find out more Here
Applestar said:
http://www.ncp.de/english/download/testsoftware/index.html
Click to expand...
Click to collapse
I have installed this but can't see any way of configuring the VPN connection. How did you configure it?
You have to use the PC client in order to create a configuration file and then transfer the file to your device
duh!
thanks!
bluefire is amazing. i bought it.
I came close to getting bluefire to work on our Cisco network... But once connected it would not transfer data.
I read on a seperate post here that alledgely the medianet unlimited plan uses the wap.cingular access point. That point is NAT based and some vpn clients do not like that... So they refuse the connection based on changing ip addresses.
I am not a networking expert so I do not know if this is in fact the case.
I do know I tried every freakin setting for bluefile and could not get a vpn tunnel from my phone to our Cisco vpn... So I gave up!
NCP
Could I get more specific infos about bluefire? They wanted a 5 page survey before they would send me a (business) trial.
Well, NCP Secure Entry VPN Client works perfect for me with Lancom and other standard firewalls. And yes, configuration is made with a Win XP Desktop Application. Nice about this: They got a Desktop VPN client as well which will be configured exactly the same way. So if you got a working setting for your Laptop you can manually copy the settings and they will work on the PPC as well - thats what I did.
Hi,
I'm currently on a HTC Trinity using Mary's 3.3.5 ROM and want to be able to connect to my universities WiFi network but to do so I need to use a VPN tunnel, anyone recommend a good PPC App that will allow me to connect to my universities VPN?
Cheers,
Mike
mikecsmith said:
Hi,
I'm currently on a HTC Trinity using Mary's 3.3.5 ROM and want to be able to connect to my universities WiFi network but to do so I need to use a VPN tunnel, anyone recommend a good PPC App that will allow me to connect to my universities VPN?
Cheers,
Mike
Click to expand...
Click to collapse
WM6 Pro includes both a PPTP & a L2TP/IPSec VPN client. This will work with most VPN routers & firewalls, however they may not be configured to support it. If you can connect using Windows 2000/XP's built-in PPTP or L2TP/IPSec VPN Client then you can almost certainly connect with WM6's.
A lot if VPN Routers & Firewalls are supplied with a 'free' Windows client that has the documentation geared around it. However most (if not all?) of these products will work with the native VPN client in Windows 2000+ (and WM5/6). I would try and stick with the L2TP/IPSec client but this requires some additional steps over setting up PPTP - on both the client & server (router). It is worth the extra steps in my opinion though.
Andy
I have the same problem ... I am not able to connect using the default VPN client ...
Hi,
There's a great review of vpn clients by Menneisyys in the Wiki. It's entitled:
'Access Your Desktop PC From Your Pocket PC!'
I'm sure you'll find it very useful because it would point you in the right direction as regards VPN tunnelling to your Uni's server.
kiwi992.
kiwi992 said:
Hi,
There's a great review of vpn clients by Menneisyys in the Wiki. It's entitled:
'Access Your Desktop PC From Your Pocket PC!'
I'm sure you'll find it very useful because it would point you in the right direction as regards VPN tunnelling to your Uni's server.
kiwi992.
Click to expand...
Click to collapse
HI!
Thank you for your reply, but this articles are about "Remote desktop" - like solutions for WM - based devises. Not for connecting to VPN.
Did anybody have had any success so far?
Any working 3-rd party VPN clients / Solutions?
Thank you in advance.
Dmitry.
====
keyword list: VPN; connection; VNP over WIFI; VPN WM5; VPN WM6; VPN problem; VPN client;
Hi,
You might find Manneisyys' review very long but if you take your time to read it, you'll see that he talks about the various VPN clients and how they compare. VNC, VNC+, etc are all mentioned there.
Just take your time to read it.
kiwi992.
Nice article, is the VPN working?
Do you have the WM6 VPN client working? Specifically the ActiveSync -> VPN -> MS Exchange functionality that was there under WM5?
kiwi992 said:
Hi,
You might find Manneisyys' review very long but if you take your time to read it, you'll see that he talks about the various VPN clients and how they compare. VNC, VNC+, etc are all mentioned there.
Just take your time to read it.
kiwi992.
Click to expand...
Click to collapse
Thank you for your answer!
But. Once again: the article talks about REMOTE CONTROL with the use of things like: RAdmin, MS RDP, etc.
This sofware - are remote desktops, so called VNC, not VPN clients in a classic way.
There is a little mess we get at the moment. (I've defenetelly got)
Let me describe in detail:
People need VPN here for many reasons, for me it is:
- to connect to some VPN through WIFI with our WM5 \ 6 device.
In my case- this is a public WIFI internet provider, which has a wifi coverage in the city.
Wifi is open PPTP. I need to type in a login \ pass on the web page I get, to start using the internet in current wifi session.
The ALTERNATIVE way to conect to internet - is to establish a VPN connection over the wifi.
I can successfully do in on the laptop.
With my UNI, WM5, AKU 3.5 - I can connect to VPN with the built-in VPN Client, but the first request to internet (via browser or Messaging send-receive) - drops my VPN connection, as it described here in the forum.
So: we need some software that can work.
I tried so far:
1. BlueFire VPN - just can't connect.
2. Antha VPN - just doesn't work.
I have heard thah on some other ROMs there is no problem with the built-in VPN client for PPTP, will try with some other WM6 ROMs later.
Any solution so far?
Thank you, kiwi992
Thanks to everybody!
Hi, im sorry for my bad english.
I have the same Problem. I search for an VPN tool. I have wm6. I know ther ist an VPN client but it doesn't work. To connect to the VPN in my University I need the L2TP/IPSec "safety andcertificate" but I don't kwon where I can load this.
thank's for helping
IronMaster1987 said:
Hi, im sorry for my bad english.
I have the same Problem. I search for an VPN tool. I have wm6. I know ther ist an VPN client but it doesn't work. To connect to the VPN in my University I need the L2TP/IPSec "safety andcertificate" but I don't kwon where I can load this.
thank's for helping
Click to expand...
Click to collapse
Hi! The L2TP/IPSec is a special story.
It is widely discussed here at forum: xda-developers > General discussion > Networking >
Search for *VPN* string on this forum.
This is the: http://forum.xda-developers.com/showthread.php?t=302520&page=2&highlight=*VPN* one of the success stories.
You need to obtain the certificate from the system administrators of your network. You may also have some "magic" URL in your campus network, where you can download the required certificate. This URL should point to the inranet web page of the web interface of the VPN server.
If your goal is to securely connect to some specific computer on the network, you should use one of the VNC programs: the VNC server part on the computer, and the VNC client on your device.
In any case - first check your certificate \ settings on, say, Windows XP laptop, connected through WIFI, first, then continue with the device.
Good luck!
Dmitry
VPN problems
I don't know if this issue is specific to my device (pharos gps 600 gps phone), or to windows mobile 6 which I'm running.
I can't connect to my vpn through wifi, the reason being is that I cannot associate any connections through the wifi card with the vpn info.
Wifi card doesn't show as a selectable modem in the modem tab next to the vpn tab in the vpn config. Only modems are cellular line modems, bluetooth, and one "hayes compatible com1" which is my usb I would guess.
Does anybody know how I might get around this?
I can't seem to find where to set HTTP/Socks proxy settings for applications using WIFI networking on my Xperia. Basically I'd like to do this so I can use Pandora here in Hong Kong.
Any ideas?
i asked this question before >.> no one answered ;P
Not sure but wouldnt that be dependant on your carrier. might need to look your carriers website
in opera u could try setting them manualy with "opera:config" as URL
never tried it
sitelister said:
I can't seem to find where to set HTTP/Socks proxy settings for applications using WIFI networking on my Xperia. Basically I'd like to do this so I can use Pandora here in Hong Kong.
Any ideas?
Click to expand...
Click to collapse
There's no way you can connect through a proxy with your AP. The connection with the AP (wireless connection) is established directly. If you want to use a proxy when you're connected to the wifi, it is up to the application that you use for browsing/do the networking.
For windows there's Proxycap,..etc., apps that "proxyfies" anything. I don't know if there's one for WM.
There's PUTTY for WM (ssl tunneling software), bot i don't know if this is useful for you.
According to the SE tech support, it is not possible to set up a proxy through WiFi. You need to use a browser that you can enter your proxy setting into, such as SkyFire. That is the only way I have been able to get it working.
I am sure this is some where in this forum which I am just missing. I have spent 6 months searching for what seems to be a common issue by design. That is a solution to setup LAN Proxy Servers, specifically authenticated ones. I've found nothing that is a good fix, the best has been to setup an pass through proxy on a local workstation and then set your Gateway as that machine. The only issue with that is anyone on the network could do the same and all traffic would be logged as me. I work in the IT department so I could do so pretty easily, but that isn't a solution for other people on our network.
Is there anyone that has come up with a good solution, setting method or app to solve this?
If not something to think about is create an app that is a proxy server on the phone (so it acts as the local workstation) in the above example.
Better yet if it was just apart of the WiFi settings (and if you could set them per SSID), but that is probably more of a Google/OS thing.
Thanks,
John