Hi I recently signed up for a StrongVPN 3 Country deal to give me a stable VPN connection in China. I have set up all ok om my home PC and it works fine allowing access to sites otherwise blocked here.
Then i set up a VPN connection on my HTC Touch Diamond2 I can get the VPN to connect using either IPSec/L2TP or PPTP methods, however neither Tunnel seems to allow Internet access to either MS Explorer or Opera Mobile 10 or any other internet program.
In fact when i have established the VPN connection and then start my internet explorer or any other program which needs to access the internet then the VPN connection is dropped.
If I connect the VPN tunnel on the TD2 i can site there watching it for ages so it does not seem to be dropped after any specific time frame, only when I start an internet access program. for instance if i open my Hotmail account then the VPN connection stays until the point when i tap send and receive then it drops immediately and the hotmail account then synchronise mail via the standard wifi connection.
I also set-up my home PC to allow incoming connection and then set up another VPN connection on my TD2 to allow it to connect to my home PC. but whilst i can connect to my home PC i can not surf the internet using the VPN tunnel......I had thought that i might be able to start the StrongVPN connection on my homePC and then access it via the VPN connection from my TD2 to my HomePC but it does not seem to work that way.
My objective is to use my mobile phone to be able to surf social networking sites that are otherwise blocked by censorship.
Sorry for the long post but please could anyone with advise or experience at setting these two functions up on WM 6.5.3 please advise.
Well I think I may have found out the reason for the VPN connection to drop out....I needed to change my setting in CONNECTIONS and where before i selected my GPRS or EDGE service provider i now need to change that to "My Work Network" as this is where i set up the StrongVPN connection. now i have done this change to the settings the VPN connection does not drop out when any Internet program is started.
But I still can not access the blocked websites using StrongVPN on my WM device so I do not really know if it is using the VPN connection or not.....
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
ahmadnawaz said:
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
Click to expand...
Click to collapse
StrongVPN Help desk advised me to input their DNS server settings in to the VPN account settings. I will try this when i get back to China in September. the DNS settings are found by edit the VPN account then next, next and select "Advanced" then scroll to "Servers" there you can select manaual server address and use the one that you VPN service provider recommend.
Let me know how you get on.
I have a similar problem here. I have setup the VPN in network connections but am still unable to surf blocked sites. The VPN worked fine on my PC. I have also changed the DNS setting for the VPN but no luck. But since there was no popup windows telling me whether it is connected or disconnected, how do I know the status of the VPN connection? Thanks!
to see if you are connected just tap on the top info bar then u should see your wifi connect and also your VPN connection. if you enable sound notification for connections in sounds then you will also get an audible connect and dissconnect to let u know. remember to set all your connection settings to "work connections" as i fount if not then when u open opera or other program that needs internet connection it will disconnect the VPN connection.
Thanks. I have tried that and the VPN was online. But opera was just couldn't open any page. Eighter the factbook tab in TouchFlo3D couldn't login. Any idea?
Have the same problem connecting to my home network - Remote Desktop works fine, until I open a browser on my HD2 - changing settings mentioned above didn't help...
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
scv said:
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
Click to expand...
Click to collapse
I'm not sure what you mean by "added wild cards to exceptions"....what exceptions and where on your PDA did you add them?
As far as I was aware you are only able to set up a VPN connection in the "My Work Network" connections area. then to stop your VPN connection from being dropped by any application that access the Internet, you simply change your options to BOTH use "My Work Network" then the VPN connection is used for all applications.
However that said, I still cant access blocked sites using my VPN connection with StrongVPN in China. even after setting my Server DNS to that of StrongVPN it still does not work.
Anyone got any ideas why or how to access blocked content in China on their PDA??????
VPN 10 Reply
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
WiFi BUT NO EvDo FOR VPN Reply
Quick update - I now have this working at 100% through WiFi, where I don't need it.
Any updates?
- 2 Bunny
HINT INQUIRY Reply
Any updates on this one?
- 2 Bunny
CURIOSITY Reply
Any new thoughts on this?
- 2 Bunny
APRIL Reply
Any updates on this?
- 2 Bunny
DIAMOND IN NEED Reply
Any updates on this?
- 2 Bunny
kainppc6700 said:
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
Click to expand...
Click to collapse
same here
taker2
SOMEONE ELSE HAS THE SAME PROBLEM Reply
taker2 said:
same here
taker2
Click to expand...
Click to collapse
Great. Let me know if you get any updates. I'm still stumped on this one. What ROM are you using in your Diamond?
- 2 Bunny
Related
Hi Guys,
I have got a problem connecting to any wifi network and accessing the internet. The problem is rather confusing beacause at home i can access the shared drives on my PC over wifi, and i can also download email messages into the messaging client, but the internet does not work?
Is it something to do with the DNS settings (or lack of DNS server) in the network cards screen, and if so does anyone have the DNS servers for O2 ( i know they start 193.x.x.x)
thanks
The O2 DNS servers are:
193.113.200.200
193.113.200.201
However, I have a feeling that's not what you need; you probably want to use the DNS servers from whoever provides you home internet connection (since that's how you're connect to the internet; not via 02)
good luck
Thanks, i've put those in and will see if they work again. It did work before i "accidentally" set it to automatic :? lol
Hello,
i have a qtec 9100 and for e-mails I use our company e-mail (microsoft exchange server over VPN).
I have the VPN conection already created but how can i turn it on when I need to syncronize e-mails or how should i configure my outlook so it would syncronize via "My Work Station" not via "Internet"?
Also I have a problem with wifi connection.
It is as unstabile as possible. Even when I sit next to wifi router it sometimes disconnects me and will not connect again.
Is there any possibility for me to upgrade the driver or what else could I do?
Marko
i dont have a problem with wifi and use it daily.
it can have performance issues if you wind back the setting to preserve battery, but I dont find it much of a problem at all.
in relation to VPN, a bug in this device that wasnt there before is a need to go into network settings and connect the vpn manually first, before it will work.
in relation to activesync, if your work is using 2003, there shouldnt be a need to use vpn, you should be able to use activesync via gprs/3g/wifi without a vpn, though I found that a bit unstable.
an alternative for email is to use "webmail" which is also possible on your device, but over gprs might be a bit slow.
not sure if you have encountered yet the need for the exceptions to be used for the IP addresses at work that you are using within the VPN settings
simon_darley said:
i dont have a problem with wifi and use it daily.
Click to expand...
Click to collapse
I still have the problem
it can have performance issues if you wind back the setting to preserve battery, but I dont find it much of a problem at all.
Click to expand...
Click to collapse
i have the settings set to "best berformance" - still doesn't work.
in relation to VPN, a bug in this device that wasnt there before is a need to go into network settings and connect the vpn manually first, before it will work.
Click to expand...
Click to collapse
can you please go step-by-step, i couln't find the "connect" button.
in relation to activesync, if your work is using 2003, there shouldnt be a need to use vpn, you should be able to use activesync via gprs/3g/wifi without a vpn, though I found that a bit unstable.
Click to expand...
Click to collapse
with active sync there is no problems, but I do not want to carry my computer with me all the time
an alternative for email is to use "webmail" which is also possible on your device, but over gprs might be a bit slow.
not sure if you have encountered yet the need for the exceptions to be used for the IP addresses at work that you are using within the VPN settings
Click to expand...
Click to collapse
that one (excuse my english - third language only) i didn't understan, can you please explain it, thanks
oki doki
firstly, is your exchange server at work 2003? you dont need to carry your laptop to access exchange server 2003 activesync with your PDA, you can do it direct to your PDA over the internet, if your server is so configured to allow external access to activesync.
exchange 2000 and 2003 also have the ability to publish all of your email, contacts, diaries over the internet via what is called WebMail, similar in nature to a hotmail account or Gmail account. This is done using Pocket Internet and allows access to everything, but your servers need to be configured to access the webmail. It will normally be a secured site, and is accessed in internet using an address similar to https://myservername.com.au/exchange. Then just put username and password.
To get to VPN, Start > Settings > Connections. Go to Connections, locate the area where you have placed your VPN connection, probably my isp, find the VPN tab, press and hold it, press connect. Yes, if you want talk about to many clicks, this is a very long way. You used to be able to do it via the antenna picture on the menu bar, but its gone now and I dont know how to get it back. Have you setup your VPN connection?
A bug in the device is that depending on the circumstances, you try to connect your VPN, it drops off when you try to use it, such as run terminal server or activesync over the vpn connection, it will simply disconnect. this is due to a stupied MS setup whereby it disconnects the moment you try to run any address that has a "." in the address over a "My Work" style connection.
Is your firewall stopping you from accessing the? What is the router configuration? Are you using WEP encryption? Broadcasting your SSID? or are you accessing the settings on your router and allowing a connection based upon named devices such as MAC addresses? Is it established as an access point with security or an adhoc connection?
Further questions, we may have t work on a PM basis if you dont know what these statements mean, and address them one by one, or pay an IT technician that is MCSE qualified to get this working in about 30 minutes.
I want to use PPTP vpn connection to my work together with Remote Desktop (Teminal Service) application.
The PPTP vpn connection is established successfully.
From my work PC I can ping the pptp ip address of my PPC.
However if I switch to an application which would generate internet traffic (such as terminal services, internet explorer) my PPTP connection drops.
On my vpn server I get the logs and see the disconnect reason as "user requested)
What is the problem ?
Thanks...
hi,
I guess nobody has such experience with vpn connections.
where can I find information about this problem ?
thanks
Hi, I have the same problem more or less
see http://forum.xda-developers.com/showthread.php?t=291208
I have the same problem when trying to use Skype. My office also requires the use of a VPN (PPTP) when connecting via the wifi.
Skype connects, I can make calls, but the connection is dropped after 30s (the VPN is closed). Oddly enough, it I have the impression I prevent the VPN connection from dropping by using Pocket Internet Explorer at the same time (I have tried creating a website that automatically refreshes every 10s, but this didn't keep the VPN open). The Messaging client als shows odd VPN behaviour: it always closes the VPN, and opens it every time send/receive is selected.
I suspect not all programs keep the VPN open, even despite the fact that those programs are generating traffic over the connection.
Any hints or suggestions are greatly appreciated!
Jorg
(sorry, I can't edit posts in Opera Mini)
MarsRover: I have changed the AlwaysOn registry setting in the registry (in the folder of my work vpn). Ii appears to have changed the Messaging behaviour (but I need further testing to be sure). Tomorrow I'll see if it changed the Skype connection.
Thanks for the suggestion, if it works it ought to be put in the FAQ.
Jorg
Hi,
MarsRover,
I couldn't understand the solution. Can you explain ?
My situation is :
I am using Wifi connection to access internet. This connection is selected as my internet connection.
My pptp vpn connection is set under my Work connection.
So when I use the pptp connection I connect to Work over Internet.
But then it gets dropped if I open internet explorer.
If I set "*/*" to my intranet addresses, I have to connect to everywhere over my VPN connection. This is not good because I don't want to use VPN connection for Web browsing etc.
There must be another way ? Don't you think so ?
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Hi
You do not have to redirect all traffic through the VPN you can pick and choose under settings>connections>advanced>exceptions just add the urls you need. ie so instead of */* use the specfic range ie 10.0.0.*/* or whatever range your work uses. One more issue however if the wirless ip range overlaps the internal VPN work range you may still have isssues. ie if your wireless ip address range is 10.0.0.x and your vpn range is 10.0.0.x then even if you add 10.0.0.*/* in the exceptions it may still try the wireless link rather than the vpn link for your TS etc. If you get my drift. There is a discussion on this here:
http://forum.xda-developers.com/archive/index.php/t-217422.html
Stephen
Thank you Stephen.
In fact, I am aware of how the exception list works. I can add the IP addresses which I want to reach via work vpn.
However, I still wish that there was a way to use VPN connection manually without using an exception list.
Isn't this possible ?
mrmrmrmr said:
.... This is not good because I don't want to use VPN connection for Web browsing etc....
Click to expand...
Click to collapse
This is good for me because I DO WANT to use VPN for all network access.
mrmrmrmr said:
Btw, if I set AlwaysOn to "1" in registry , and then check it back after a connection is made, I see it is "0" again.
Click to expand...
Click to collapse
It happens if you use settings->connections to view/change settings
hello...
i haven't a clue if this helps...
in my firm theres a cisco vpn connection... i search a long time for a programm that i can use with that vpn connection...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
futureshock said:
hello...
finally i find one... NCP Secure Client... works for me... maybe it helps you...
Click to expand...
Click to collapse
where can I find it ?
does it connect to cisco vpn concentrator / ASA ?
there is also AnthaVPN from AnthaSoft but it's not very reliable.
PPTP
Bluefire seems to work fine with IPSec, but I need PPTP (IPSec requires NAT-T in most cases with GPRS/3G).
hi,
i was trying to connect to my network which has a proxy. i setup the certification and i was able to connect to the network but cant access to any site because it requires a proxy
so is there any program that the proxy go through it so i can open the sites!! or the applications
r there any programmer can do such an application for $
i hope u got my idea !!!
it used to work on v.6
a u b.e d u.l b/cns/helpdesk/knowledgebase/aubwlan/aubdot1x/pdaconfig.html
do you want to use the internet connection of a computer on your network or the internet connection the network is connected to? or open the websites on your network?
its my universities wireless network & im trying to connect my hd2 to it but because of the proxy i can only access to my universities website and no other sites like google.com even if i setup the proxy as its shown in the link i post
use skyfire or netfront proxy/vpn dosent work propertly on wm
i tried it & didnt work
can any 1 program something to fix this issue?? or where can i find someone can program a software like that & ill pay him!!
proxy is part of your Connections Settings.
Hello to all any people able to answer to the following question:
On my HD2, I tried since a long long time (too long !!!) to connect to internet through the proxy of my company and I never succeed.
I was able to connect with my HTC Touch P3450, but with the same parameters on my HD2, I never have the popup requesting me my name and password for passing through the proxy, and so I always have the famous message : DNS not found !!!
Just another information: I'm able to surf on all pages of the INTRANET of my company, but unhopefully, not on INTERNET
I will be very happy if someone get a solution
Did you try to configure the DNS manually? The primary DNS is the default gateway of the router.
tell me if it helped.
dan
a029159 said:
On my HD2, I tried since a long long time (too long !!!) to connect to internet through the proxy of my company and I never succeed.
Click to expand...
Click to collapse
You mean when you are USB connected to your PC with activesync?
...no I mean connected through wifi...
a029159 said:
Hello to all any people able to answer to the following question:
On my HD2, I tried since a long long time (too long !!!) to connect to internet through the proxy of my company and I never succeed.
I was able to connect with my HTC Touch P3450, but with the same parameters on my HD2, I never have the popup requesting me my name and password for passing through the proxy, and so I always have the famous message : DNS not found !!!
Just another information: I'm able to surf on all pages of the INTRANET of my company, but unhopefully, not on INTERNET
I will be very happy if someone get a solution
Click to expand...
Click to collapse
in setting , go to connections and then connections , go to my work network (bottom) , click on edit my proxy server , check 2 cases , in second case, u can enter proxy and port.
step 2) tab anh hold on Ur wifi network (when u turn on wifi, list of available networks shows) tap and hold on Ur network name, tap edit , and then select: connect to WORK
sorry for my bad english
a029159 said:
...no I mean connected through wifi...
Click to expand...
Click to collapse
If your company has Wifi..why do you need to connect internet through proxy?
Because almost all corporate and academic LAN requires you to use proxy server for security reasons.
mrkyo said:
If your company has Wifi..why do you need to connect internet through proxy?
Click to expand...
Click to collapse
cool_dd said:
Because almost all corporate and academic lane requires you to use proxy server for security reasons.
Click to expand...
Click to collapse
oh..I see..so can I use this way to connect internet through proxy at my home..I'm using Lan server not wifi? Is it possible?
You are not getting it properly, The corporates have in house LAN (Local Area Network) which connects any number of computer systems they have. Individual computers don't have internet connection but are connected to internet through proxy server.
What you have at home is not same you have a computer connected to modem using a LAN cable which is not same. your computer is directly connected to internet.
However you can still use public proxies to maintain your anonymity online. use proxy dot org or other similar site.
and lets just keep this thread free of information other than HD2 !!!
Cheers!!
mrkyo said:
oh..I see..so can I use this way to connect internet through proxy at my home..I'm using Lan server not wifi? Is it possible?
Click to expand...
Click to collapse
I FOUND THE SOLUTION
HEEYY EVERY BODY
set proxy for opera:
type in URL opera:config
!!!!!!!!!!!!
then go and set what ever you want
as easy as this!!