New to this forum, need some directios - JASJAR, XDA Exec, MDA Pro General

Hi all
I am so happy I have found you ! I have had the MDA PRO for 3-4 years now and I just realized (reading this forum) that I can do a lot more with my PDA and I am a lot behind with the software and drivers !
Here is what I am running now:
PDA: T-Mobile MDA Pro
ROM version: 1.30.77 WWE
Rom date: 02/20/06
Radio Version: 1.09.00
Protocol Version: 42.42.P8
Ext Rom: ...blank !!! (nothing there)
I am running Vista 64 and my computers can not see the PDA any more (this is why I started searching and I finally found you).
Could you please help me with the following:
1 How do I solve the Vista64 to PDA connectivity ? The computer can't find the driver.
2. How do I upgrade the drivers to see a 16GB SD card (Kingston)
3. How do I upgrade the wireless drivers to see the 802.11g networks ?
4. What can I do to see DivX movies on my PDA ? Do I need to upate my VGA drivers to see 640x480 ?
5. What version of WM shoul I try to upgrade to ? Could you please tell me if I shoud try this on Vista64 or XP32 ? Are there any problems with this ?
Please send me the links to articles on this forum or somewhere else, no need to explain everything again here.
I would prefer to solve 1-4 without upgrading my ROM software, 5 is not a major concern for me.
Thank you
1000QA

Go to first new post ROMs for HTC Universal, by Cotulla is the greatest rom there is allowing you double the space on your universal which really gives you loads of potential, all that you need is either in universal mobile 6 as some of the programs registry tweaks and some programs such as advanced config, ill round up what i can later tonight to help more in depth

1000QA said:
Hi all
I am so happy I have found you ! I have had the MDA PRO for 3-4 years now and I just realized (reading this forum) that I can do a lot more with my PDA and I am a lot behind with the software and drivers !
Here is what I am running now:
PDA: T-Mobile MDA Pro
ROM version: 1.30.77 WWE
Rom date: 02/20/06
Radio Version: 1.09.00
Protocol Version: 42.42.P8
Ext Rom: ...blank !!! (nothing there)
I am running Vista 64 and my computers can not see the PDA any more (this is why I started searching and I finally found you).
Could you please help me with the following:
1 How do I solve the Vista64 to PDA connectivity ? The computer can't find the driver.
2. How do I upgrade the drivers to see a 16GB SD card (Kingston)
3. How do I upgrade the wireless drivers to see the 802.11g networks ?
4. What can I do to see DivX movies on my PDA ? Do I need to upate my VGA drivers to see 640x480 ?
5. What version of WM shoul I try to upgrade to ? Could you please tell me if I shoud try this on Vista64 or XP32 ? Are there any problems with this ?
Please send me the links to articles on this forum or somewhere else, no need to explain everything again here.
I would prefer to solve 1-4 without upgrading my ROM software, 5 is not a major concern for me.
Thank you
1000QA
Click to expand...
Click to collapse
Welcome to the forum
If you want to solve number 2 & 3 you have to reflash your ROM, (At least I don´t know another way to do this without reflashing)
If you decide to do that please READ the Wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,

orb3000 said:
Welcome to the forum
If you want to solve number 2 & 3 you have to reflash your ROM, (At least I don´t know another way to do this without reflashing)
If you decide to do that please READ the Wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Click to expand...
Click to collapse
Thanks a lot
What are the chances to brick the phone with this ?
I am running vista 64 and ...as stated above I have problems. I still have the old WinXP 32 laptop that I can use for this but if there is a Vista 64 solution I would go with that if it is safe.

mr4r4n said:
Go to first new post ROMs for HTC Universal, by Cotulla is the greatest rom there is allowing you double the space on your universal which really gives you loads of potential, all that you need is either in universal mobile 6 as some of the programs registry tweaks and some programs such as advanced config, ill round up what i can later tonight to help more in depth
Click to expand...
Click to collapse
Thank you very much orb3K !
I am waiting your post, when you say double space does this mean that it will unlock internal space in ROM ?

1000QA said:
Thanks a lot
What are the chances to brick the phone with this ?
I am running vista 64 and ...as stated above I have problems. I still have the old WinXP 32 laptop that I can use for this but if there is a Vista 64 solution I would go with that if it is safe.
Click to expand...
Click to collapse
You´ll be fine as long as you follow the instructions
I have reflashed since I have my Universal (2005) like 50 times and all is ok!
Good luck,

Vista conectivity solved
So far by reading the docs I managed to make my PDA visible in Windows x64 wich is excellent
You are great guys !

Related

I need help restoring my windows mobile 2003 software

:roll:
Hi I have a big problem and i need all the help i can get
I have an XDA IIi but i accidently deleted all the data on it
the opertating system is gone the screen is only showing me Serial 1.0
and when i connect to my pc only shows USB 2.0
I would like to know if somebody can help me out with this and tell me how to restore the software to my device, i have a backup copy on my SD card, but i don't know how to used
Please help me
thanks
[/b]
have to reflash it
how did it happen?
did you try puting any rom version in it or what?
more info is needed
hey
I was trying to upgrade the radio version of the phone, but the version i was installing was not desgined for the XDAIIi , so, instead of upgrading, it deleted of the rom of the device and now the operating system is gone
the only thing i still have is the backup copy that i made defore the upgrade
i don't know if there is a way to use that backup copy in order to restore the system
thanks
Recommendation
It is propably that the system ROM was erased during upgrade and the upgrade wasn't successfull. Try to download the Diamond 1.2 WM2003se(my recommendation) ROM images package(somewhere available at this forums(Himalaya Upgrade)) and aferwards to flash your device with these files. If u want,u can try also the WM05 system.
He said his device is an Xda IIi not the old II.. Well you can reinstall back ur old ROM, no worries.. Download from my-xda.com..
i or not i
I thing there's no matter if is it IIi or simple II. Or not?
How do I fash my device in order to install diamond 1.2?
I also was looking an upgrade for the XDA IIi but now there are not offering any updates, I have tried to install the upgrades for the XDAII but it gives me an errror telling me that the ROM version is different and it cannot be installed
...
If you mean the Country ID Error while attempting to flash the WM05 system,there's a problem of this OS. 2003se is without problem(for me). Simply download the Diamond ROM from this topic:
http://forum.xda-developers.com/viewtopic.php?t=18287
or directly:
http://forum.xda-developers.com/download.php?id=3739
This contains 4 files(maybe more,but these are important).
-HimaUpgradeUt.exe
-ms_.nbf (Extended ROM image)
-nk.nbf (System Image)
-Radio_.nbf (Radio stack)
Start the bootloader(probably you are there),put the Hima to cradle,Windows at your computer detects your device and then extract the downloaded file into one folder and run HimaUpgradeUt.exe
This utility is writing what you should do.
As I have readed that the WM05 OS is a little bit buggy(some compatibility problems etc..) at this time to use in Hima. Therefore I am using the 2003se.
Thanks a lot!
Hey guys,
I just downloaded the XDA IIi ROM version from the O2 website
My device is back to normal. I coudn't do it without all of you guys.
Thanks a lot specially to you jamil_mhmd for providing me the address
Sincerely
Jorge :wink:
You're welcome
Nice to help you.
Re: i or not i
TomasNM said:
I thing there's no matter if is it IIi or simple II. Or not?
Click to expand...
Click to collapse
Of course it does matter.. Remember that the II and IIi is now a really different device even though both looks identical.. For example, u said he can upgrade to WM2005 (or ROMs that was meant only for Xda II), but of course this can't be done, this is bcos the difference in hardware specs, 4 example IIi has 1.3 MP cam (II = 0.3MP), 128MB RAM, 128MB ROM (II=128MB RAM, 64MB ROM) and so on..
JorgeGZC, I'm glad to be of help to you.. :wink:
Oh sorry.
I didn't know. I'll be well advised.
İ am a mda2 user. İve bought my device from Germany and after that i changed its ROM to an english one using a rom editor to change its country id .. This encouredged a close friend of mine and he bought a O2 XDA2i. And since both me and my friend have no idea about German language we immediately tried to convert it to an english ROM.
And using a wrong ROM (sinmerged 2003 se for himalaya) i killed his machine. It now only writes serial or usb (when connected to cradle). Someone told us that if we flash it with a original German ROM it can work again. But there is no German ROM downloadable . And even if we find a German Rom and install it , it wont solve our language problem. I am a dentist and i even cannot believe how much i've learned browsing these forums
If you can help me i will be very happy!
note : in the ftp server there is rom named german rom for xda2i.. But its a lie. its in english
The same?
That looks like the same problem as at the top of this topic. Just read all this posts once again and you'll get the right way to solve your problem. Hope that helps.
I also have the same problem. I tried to install the wrong upgrade. I've downloaded the new one but i keep getting a connection problem message because activesync can't find the XDA. Help please!!!!
...
When you are in bootloader then ActiveSync will not find the device to synchronise with(cause the WMOS is not running and therefore is any synchronisation disabled). When you put into the cradle,the computer should find new device(Microsoft USB Sync). Then is the device connected and ready to update.

Deathnoise 1.11.171 ROM. Bluetooth patched, camera fixed. Radio 1.04

Hi,
Here's my own modification. I did id for my own purpose, and decided to share it with you.
As a Base, I choosed 1.11.171 version of O2 ROM.
I stripped it from o2 stuff, left only necessary files. I added extra bluetooth profiles and left bluetooth and camera patch from new version (pug's version doesn't have it, despite what he says in his posts on this forum)
I also added Radio 1.04 from Pug's release.
Enjoy
alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed.rar [45 MB]
alternate downloads:
Mirror 1
Mirror 2
And if you used it, please - give me a feedback. thanks
deathnoise said:
Hi,
Here's my own modification. I did id for my own purpose, and decided to share it with you.
As a Base, I choosed 1.11.171 version of O2 ROM.
I stripped it from o2 stuff, left only necessary files. I added extra bluetooth profiles and left bluetooth and camera patch from new version (pug's version doesn't have it, despite what he says in his posts on this forum)
I also added Radio 1.04 from Pug's release.
Enjoy
alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed.rar [45 MB]
And if you used it, please - give me a feedback. thanks
Click to expand...
Click to collapse
Thanks for your sharing man, but the download link is not available now as what I saw as follows, would you plz provide another working link:
Dear users!
Our service temporarily limits the work due to technical problems. We will continue to maintain it in 1,5 months and we hope for your understanding. In this time we will improve Files-upload.com and we will present the more flawless and fast service to you. We hope for your understanding. Watch the news. Thanks that you worked with us, we are waiting for you on the updated site.
尊敬的国用户!
因为技术问题我们的服务暂时中断,我们将在一个半月之后继续我们的服务,希望您能够谅解。在此期间,我们将改进Files-upload.com,以便为您提供更优质快捷的服务,我们期望得到您的理解。请关注我们的动态,感谢您对我们的支持,希望我们优化后的网站能继续为您服务。
hmm. it's working again.. i think that hey had some minor technical issues. should be ok.
Is there improved radio strength, stability? What does .171 improve?
yes
radio was taken from pug's release (162).. which is good, because it's more stable than official 1.0
apart from this, there's patched bluetooth driver, that was officialy released by o2. _THE SAME_ that previously was circulating around this forum.
i merged it with extra profiles taken from previous releases, because some people experienced a tiny set of options with this upgrade.
camera fix was also merged from the new, official 171 release. dunno what it does, because i'm not using this function
overall, the stability is the same because main rom version is the same. it doesn't change anything in windows core. changes were made only to the extended rom. that's it.
i have many applications (including startup ones, like: spb pocketplus, resco explorer, skype, agile messenger, etc.)
i'm using my rom for a week and I, personally, didn't experienced ANY hangs or resets. it's working like a charm.
deathnoise said:
yes
radio was taken from pug's release (162).. which is good, because it's more stable than official 1.0
apart from this, there's patched bluetooth driver, that was officialy released by o2. _THE SAME_ that previously was circulating around this forum.
i merged it with extra profiles taken from previous releases, because some people experienced a tiny set of options with this upgrade.
camera fix was also merged from the new, official 171 release. dunno what it does, because i'm not using this function
overall, the stability is the same because main rom version is the same. it doesn't change anything in windows core. changes were made only to the extended rom. that's it.
i have many applications (including startup ones, like: spb pocketplus, resco explorer, skype, agile messenger, etc.)
i'm using my rom for a week and I, personally, didn't experienced ANY hangs or resets. it's working like a charm.
Click to expand...
Click to collapse
Thanks for taking the time to clarify for me .
cant download
clustered said:
cant download
Click to expand...
Click to collapse
added additional mirrors. enjoy
nice to see that someone still cares about Alpine and cooking new-old rom
it's a kind consolation when we don't (and probably won't) have wm5
Thanks!
deathnoise said:
added additional mirrors. enjoy
Click to expand...
Click to collapse
TKS buddy, they work!
BTW, my ROM is 1.11.171 too, but it suspends sometime, how is your ROM?
TKS again!
abc138 said:
TKS buddy, they work!
BTW, my ROM is 1.11.171 too, but it suspends sometime, how is your ROM?
TKS again!
Click to expand...
Click to collapse
so try it!
you have nothing to loose
deezer said:
so try it!
you have nothing to loose
Click to expand...
Click to collapse
Sure I will loose many programs installed and lot of time if it suspends as my old one...
I've got a questions regarding upgrading my O2
ROM version: 1.11.00 WWE
ROM date : 01/27/05
Radio version: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.11.923 WWE
can I apply the ROM which you compile ?
does it means that I'll lose all of my apps settings then :-|
abc138 said:
Sure I will loose many programs installed and lot of time if it suspends as my old one...
Click to expand...
Click to collapse
...and suspends as well
AlbertWT said:
can I apply the ROM which you compile ?
does it means that I'll lose all of my apps settings then :-|
Click to expand...
Click to collapse
sure you can, and yes you'll lose everything (like after hard-reset)
My Alpine is dead
Yesterday I tried to update my alpine to this new Rom, but dissaster happened.
Maupgrade recognized my device and my version, and I told the program to begin with the update.
After more than 3 hours the scrren was blank with usb v1.01.
I took the pda and trie to hard reset it but it has been imposible.
Now the screen only says serial v1.01 or usb v1.01
If i try to re-run the maupgrade it only says that is checking the information of my device and stays like that for hours.
what can I do to have my PDA back?????
HEEELLLPPP
airjordan said:
Yesterday I tried to update my alpine to this new Rom, but dissaster happened.
Maupgrade recognized my device and my version, and I told the program to begin with the update.
After more than 3 hours the scrren was blank with usb v1.01.
I took the pda and trie to hard reset it but it has been imposible.
Now the screen only says serial v1.01 or usb v1.01
If i try to re-run the maupgrade it only says that is checking the information of my device and stays like that for hours.
what can I do to have my PDA back?????
HEEELLLPPP
Click to expand...
Click to collapse
if you still have the screen saying serial v1.01 or usb v1.01, your device isn't bricked. maybe try other rom upgrade
Still No Luck
I have tries to install again the same ROM but there is no way of doing it. Maupgrade freezes saying "checking infromation from your device".
Any other ideas??
Do you know where could i find an spanish rom for my qtek 2020i, or any other Rom that I could try??
thanks in advance
I still need HHHEEELLLPPPPP
airjordan said:
I have tries to install again the same ROM but there is no way of doing it. Maupgrade freezes saying "checking infromation from your device".
Any other ideas??
Do you know where could i find an spanish rom for my qtek 2020i, or any other Rom that I could try??
Click to expand...
Click to collapse
Dude, this happens sometimes. Take it out of cradle and then take the battery out. Re-insert the battery again and put it in the cradle and then re-run the maupgrade.
I have solved the problem!!!
I have tried doing it on a windows xp based computer and everything worked fine.
Has anybody had the same problem with windows vista???
Does any body know how can I find an spanish rom???
Thanks for your help
vista isn't good for flashing any htc device

How to install wm5 or 6 in I-mate sp3 ?

Hi,
I have been looking around and can't find a solution yet. Can you tell me how to install wm5 or 6 on my I-mate sp3 ? It has wm2003se currently. I downloaded and tried lots of wm5 and 6 and also rom upgrade utilities bt still can't get it done. Please help me.
Thankx in advance !
rubin_sth said:
Hi,
I have been looking around and can't find a solution yet. Can you tell me how to install wm5 or 6 on my I-mate sp3 ? It has wm2003se currently. I downloaded and tried lots of wm5 and 6 and also rom upgrade utilities bt still can't get it done. Please help me.
Thankx in advance !
Click to expand...
Click to collapse
No one to help me ???
rubin_sth said:
Hi,
I have been looking around and can't find a solution yet. Can you tell me how to install wm5 or 6 on my I-mate sp3 ? It has wm2003se currently. I downloaded and tried lots of wm5 and 6 and also rom upgrade utilities bt still can't get it done. Please help me.
Thankx in advance !
Click to expand...
Click to collapse
Follow the guide (top of the page), and install the recommended rom.
Then update the ROM with version 6.1 (v1.2).
It works perfect for my iMate SP3, bluetooth, MMS, everything....just Infrared does not work, but it's ok, I do not need IR.
fmulinacci said:
Follow the guide (top of the page), and install the recommended rom.
Then update the ROM with version 6.1 (v1.2).
It works perfect for my iMate SP3, bluetooth, MMS, everything....just Infrared does not work, but it's ok, I do not need IR.
Click to expand...
Click to collapse
I couldn't find where (top of the page) is ?
Can you plz tell me in detail...
Thankx
Top of the page - as is the first sticky post
http://forum.xda-developers.com/showthread.php?t=328226
Read through the post, all the info you need is there.
Good luck
bill_in_mtl said:
Top of the page - as is the first sticky post
http://forum.xda-developers.com/showthread.php?t=328226
Read through the post, all the info you need is there.
Good luck
Click to expand...
Click to collapse
I downloaded all of the links... however, nothing worked. Seems they are for other sets. Can you help me how to upgrade to wm5 or 6 ???
Gave this message with mtty1.42.exe
Cmd>l c:\os.bin
clean up the image temp buffer at 0x8C080000 Length 0x01B00000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
There is the description of my mobile :
I-Mate sp3 wm2003se
2.4.33.11
Typhoon
IPL 1.00
Typhoon
SPL 2.5.0102
Typhoon
USB
1. u must make ur device as supercid
2. then unlock ur device with sda-unlocker.
3. then u must install spl 1.01.0109
goodluck
tjahjo.djoko said:
1. u must make ur device as supercid
2. then unlock ur device with sda-unlocker.
3. then u must install spl 1.01.0109
goodluck
Click to expand...
Click to collapse
Can you please guide me through all process. I don't know how to make my device as supercid, unlock and how to install spl 1.01.0109.
...please seach this forum, for sure you can find everything what you need, including the step-by-step guide how to upgrade your typhoon.
If you are not able to find the guide here, I think it is waste of time for you to try upgrading - after reading this thread it is pretty clear that you are about to damage your device ...

Help require

Hay Friends, I have a O2 XDA II PocketPC with following details:
-----------------------------------------------------------------
Model No: PH10B
Rom version: 1.66.00WWE
ROM Date: 02/20/04
Radio Version: 1.08.00
Protocol Version: 1337.18
ExtROM version: 1.66.165
-----------------------------------------------------------------
I want to upgrade my device to latest possible version available today. Please help me how to go ahed.
I lik my device vry much, onlything, functionally its lagging far behind. Say even I cant add Google lattitude or any of .cab file bcs its not supporting so.
I'm totally new to this all & never done before but if guided I can do it.
i can help
Thanks!
Hey flyboy!
Thanks for showing interest, please guide me how to go?
Ok what i would do is look here: http://forum.xda-developers.com/showthread.php?t=428469
and make sure you read through before doing anything.
If you download any roms: wm6.5 is the latest, but wm6/6.1 is more reliable.
And i think il post a snap of my himalaya.
BTW: When did you get your himalaya?
flyboy
PS: If you have any problems just feel free to pm me!
Thanks!!
Well, I do have my Himalaya with me right now.
I'm carrying the stuff you have provided, I'll go through & try out same. if stuck up I'll trouble you for help.
Anyway,thanks a lot for your frnd request,you'r my 1st friend.
Greetings! flyboy.
Hi!
Hey Flyboy!
What's this Dopad? I gone through the description of flashing ROM & found to press "Dopad+Reset+Power button".
Well, I came across many WM6 & WM6.1, also read reviews for the same, which is most trusted or you like to use?
lol
typing error! DPad- press in the center of the directional pad
btw: when du get your himalaya?
i will make you a video on youtube if your still not sure.
edit: i have made the video and is uploaded:
http://www.youtube.com/watch?v=qwS_qKrI8lk
sorry about the quality
flyboy
A little more help please, Dear!
Firstly, a bi....g Thanks man!!
for the help rendered & efforts taken for me by making demo YouTube video.
Well, I all set go for my first ROM update. But just the part of precaution, I'v a query!
I gone through many threads & wiki, which helped me like tutorial.
But if suppose the new ROM update gets crash with my Himalaya, is there any way to re-jump to the existing original ROM I do have in device now?
I mean, can I bounce back to original ROM, in case of new ROM update failure?? If yes, please guide me how??
Hey Man, sorry for troubling you again & again!!
1. it will probably not go wrong
if you list all the spec of your computer and the equipment that you have for your himalaya it would give me a clearer idea about upgrading for you.
2.Its ok it keeps me busy! my teacher has gave me 3 htc voxes to fix in the past. anyway.
a little story.
When i got my himalaya in march this year i was chufed at what it could do then i discoverd that the rom was out of date and that was why i couldnt install much. Then i found this place. I read up on some threads on updating and i saw it was possible. So i nervously followed the guide because i found that if anything went wrong the device could be rendered unuseable. But... I went ahead and flashed it and it worked. And the first rom i ever flashed was athers windows mobile 6 ultimate edition. Since then i have not yet found a rom as brilliant as stable as it.
so when upgrading things can go wrong. but dont be reluctant to flash a new rom.
and you would have to do a bit of research if you decided you wanted the original rom back.
btw how old are you?
ONE MORE THING. I WILL LOOK FOR THE ORIGINAL ROM FOR YOU TONIGHT.
flyboy
I would also like an original Himlaya rom backup (O2 XDA II). As soon as I have the backup I will be flashing away!
Whoa!
Ooh! 12 yrs old compu geek ur!!
Well, I'm of 25!!
Thanks for encouragement. Like you, me too love my gadget very much & peruse a hobby of using high profile gadgets. I was not aware of this platform & came across through Googgling.
Long time I'm using O2 XDA II & loves it badly, it's a last gift from one of my friend from Singapore who's no more.
I'v a HP 614c gadget & if succeed with this , I'l like to have some R & E with that too, in fact that's require on that.
im 13 btw
flyboy
Oh, Sorry!!
Hah..ha....haahaha!!
I'm sorry, ur profile shown 12 y'day.
Well man, I got this link (forum.xda-developers.com/showthread.php?t=233219) relate to O2 XDA II WM 2003 SE ROM, please have a look on the same.
Whats your opinion, can I use this for bounce back to previous version, in case of any problem?
that rom i would recommend flashing with that first.
just to make sure3
dont forget to back up!
good luck
flyboy
Pls suggest!
Hey Flyboy!
Y'day I tried to do the process but I fell to upload Hard SPL (BTW I'm going for C_shekhsr's ROM)
I followed noobs guide, update the USB driver for vista, then went to bootload the device & try to force Hard SPL.
Following all given instructions also its showing connection error (Error 260, 264) & process stops, but in reality everything is well connected & correct.
Well, when Hard SPL program executing, I observe, it also not showing my old version @Upload (second stage of confirmation).
Is there any special process for O2 XDA II hard SPL & on vista os??
I followed all guides well; What do you think may b going wrong?
Hard SPL? whats that? i never had to use it.
regarding error no connection:
go to task manager and make sure something a long the lines of microsoft usb sync or something is installed. and then disallow all the connection settings in windows mobile device center.
oh and if it still doesnt work try it without hard spl because i didnt use it. and it works on 7 and xp.
oh and the rom im using now is WinMoB_6.1_OS_5.2.21109_Build_21109_-_Lite_WWE.
try it! it runs touch flo!
dont hesitate to contact me.
or i could show you better on msn?
flyboy
Hi!
Hey man!
As I said I'm looking to dumb C-Shekhar OS with following specs:
----------------------------------------------------------------
ROM: WM1.60.21014aCS(build 21014 AKU 1.60)
dated: 09.Jan.2009
OS 5.2.21014 (Build 21014.1.6.0)
------------------------------------------------------------------
Well, he flaged Hard SPL as compulsory pre requirement.
Well, the OS you have mentioned, is that of Ather? or from which source?
Y'day I tried Asia CE2003 (Upgraded), & that worked.
Well, in Bootloader, the device connectivity is a main issue occurring with me & I'm failing to understand the reason. I mean is this bcs of Vista or else?
sorry for late reply (baned from my computer!)
the rom i wrote is by nokser
just try it without the hardspl thing cause it worked for me.
Hi!!
Hey Flyboy!!
I load the Ather's dark ROM (WM 6.0) & its really nice, I'm enjoying a new look to my gadget.
Well, is it possible to install FM Radio on O2 XDA II? I tried the same from http://forum.xda-developers.com/showthread.php?t=479572 but saying not related application after installing cab.
Do you have any clue for same??
Well,before I logout, I would like to wish you a Merry Christmas
& here's hoping for a wonderful ski season in the New Year! A very happy new year 2010, my friend!!!
..Have a blast, Cheers !!!!
Thanks!!! really that cheered me up!
Well all the best wishes to you also my friend!!!!
The FM radio is a good idea but dont think it will work.
Are you staying with that dark rom from ather or you still going for the C_shekhar one?
merry christmas!
flyboy
btw: have you tryed manila touchFLO? its great!

HTC HD Mini - I Love It

Hello,
Sry for the titel, but my HTC HD Mini EVER HANGS
There isnt any moment without any crashed and lags !
I restart the Phone 5-10 times the day just because it doesnt reagize to anything !
I just want to take my Phone and take a Baseballstick and......
Its a Problem with the Software I think because Phone is like new and there wasnt any problem with water oder anything ealse ! It didnt fall down anytime !
PLS HELP ME !
Please do not curse... I have modified the title of your thread to remove the cursing.
@egzthunder1 -HTC HD Mini isn't bad either..
@oktay1king- If I were you i'll go to store or person i bought it,and will ask for a replacement device,not to whine on forums...or to use baseball bats )
@egzthunder1 TY a lot
@tzacapaca But the Problem is I live in Germany and my Father in Miami and he bought that Mobile, and i cant live without my mobile about 1 month (or longer) !
I forgot to say, I have WM 6.2 !
Someone have any Reason ?
there is not any WM 6.2
btw Mini is running WM 6.5.3
p.s. when you ask for help be DETAILED,or no one will try to help you..this is just an advice
example: just like when you go to dr..symptoms and stuff
otherwise we cant guess what is wrong with your phone..
Ok hm what do you need to know,....
I have WM 6.5 (Sry 6.2 was wrong) and SPL 1.42.0000.
Mobile is just about 6 Months old but dont have any(!) defects(from outside), i never tried to change to hack the mobile or anything !
Yes thats all what do you need to know ?
your father bought it for you, isn't it? Then it cannot be a HD Mini as they are not officially sold in the USA. However it can be bought on eBay or whatever...
There isn't such a thing as WM6.2, the Mini comes with WM6.5.3 (build 23103). Just check your WM build number. (Manila Settings tab -> Info about phone -> Software info)
If it isn't 23103, flash a stock ROM.and see if its better.
Good luck!
My Father lived in many countries he travels for work and I DONT KNOW in what country he bought it.
@_Madmatt TY now i can tell you more about my mobile.
...OS is WM 5.2.23103(23103 5.3.3),
Manila-Version 2.5.20131825.0
Rom-Version 1.07.407.1 (85429) GER
Rom-Date 3/21/2010
Radio-Rom 0.63.05.05
Protocol-Version 32.26.05.04U
oktay1king said:
Ok hm what do you need to know,....
I have WM 6.5 (Sry 6.2 was wrong) and SPL 1.42.0000.
Mobile is just about 6 Months old but dont have any(!) defects(from outside), i never tried to change to hack the mobile or anything !
Yes thats all what do you need to know ?
Click to expand...
Click to collapse
ROM build i need to know also
if its 1.071 or something like that..just upgrade with this one
http://www.htc.com/europe/SupportDownload.aspx?p_id=314&cat=2&dl_id=980
@tzacapca http://www.htc.com/europe/SupportDownload.aspx?p_id=314&cat=2&dl_id=980 works with my ROM version too ? I posted it on Post before yours.
yep,the 1.36xx is an upgrade to 1.071xxx
and after rom upgrade install this hotfix too
http://www.htc.com/europe/SupportDownload.aspx?p_id=314&cat=0&dl_id=989
let me know how it will work for you
and please edit the title
HTC HD Mini IS not bad...believe me
Hä ?
I need Microsoft ActiveSync for http://www.htc.com/europe/SupportDownload.aspx?p_id=314&cat=2&dl_id=980 ?
yes if you have XP,if you have Vista or 7 you need Windows Mobile Device Center
YEY,
First time a Upgrade worked on my Mobile !
At the moment i´m at 56% !
Yes MAN I LOVVVE YOU ! xD
After hotfix i will tell how it worked
Update Worked Succesfully !
But Windows XP says the hotfix exe isnt a right programm for win32
Download the Update file “PHO03611.exe” to your PC or NB.
Copy PHO03611.exe, to your device.
To install the Update, Follow the instruction below
1. Tap the PHO03611.exe which must be copied to your phone and follow the on-screen instructions to install it.
* If you performed a hard reset of your device, you need to reinstall the Update after the hard reset.
AHA I need to open it on my Mobile ?
Ty Really Much,
I cant see if Lags have stoped, it needs time, but if it´s fixed or not i gonna tell you !
I just want to say 1 thing:
You Guy ARE the best ! NOW I love my Mobile !
Ty
Everything is fixed !

Categories

Resources