Hi,
i need help where can find the the Task-Manager, i had installed QuickMenu
but i don't need this, after Deinstalling and Reset my Task-Manager never appears.
rookie333 said:
Hi,
i need help where can find the the Task-Manager, i had installed QuickMenu
but i don't need this, after Deinstalling and Reset my Task-Manager never appears.
Click to expand...
Click to collapse
I am not quite sure whether I can give the solution, but I would go to
settings - systems - and than there must be a configuration for the Task Manager. I have a german system and here it is "Aufgaben Manager", but I do not know the english name.
I think the original Task Mananger is just switched off and you just have to switch it on again.
dingolino
Thanks,
but i'd just reset my phone, but you are right
i'm looking for the Aufgaben-Manager (Task-Manager) under "Taste" (Key) i have to set "Kurzmenu in Heute-Fenster aktivieren" (Activate Short-Menu in Today-Screen)
herewith i'm able to activate or deactivate the task-man
here are some users which have the same prob after installing and deinstalling SPB panels and they can't find a solution.
Before i reset my phone I had spoken with the xperia hotline and they also cant't fix it
Related
Hello
Yesterday i tried to remove a program on my Qtek9000. But in the add/remove program, where
all installed programs are listed, was nothing! It was empty!
Then I tried to connect to the Computer but without success! An error Message appeared, "Can't
synchronize, please reconnect an try again!"
I can't even install a new program!
Please help me!
Geko
Turn OFF your firewalls then connect your Universal via USB again.
hmm, Doesn't work.
Any other ideas?
I am having similar problems. I have a list of installed programs in the uninstall list. However, whenever I install new softwares, they are not shown in the uninstall list, thus I cannot uninstall any new softwares. Anyone knows what happens?
daddyfok said:
I am having similar problems. I have a list of installed programs in the uninstall list. However, whenever I install new softwares, they are not shown in the uninstall list, thus I cannot uninstall any new softwares. Anyone knows what happens?
Click to expand...
Click to collapse
...your not using phoneAlarm are you?
This is a documented issue with a previous version and is fixed in the latest release.
Matt
Yes PhoneAlarm is an issue and does prevent installed programs to show up in the list of installed programs. If you cannot live without PhoneAlarm (Like Myself) then you have two options:
You can install SKTools. The uninstallation utility in SKTools will still show the list of installed programs even if it is not shown in the generic Windows utility.
The other option involves changing the registry. You will need a registry editor like Resco. The procedure is as follows:
1) go to..
HKEY_LOCAL_MACHINE\Security\AppInstall\
2) Select the application directory that is not showing up in the list
3) change the DWORD Role data from 40 to 24
4) Now the application will show up in the list.
Hope this works for you
Regards
srmz you are great !!!! It works and I can uninstall programs now.
I have never installed PhoneAlarm, and I forget starting from when this problem appears.
Also thanks matt1971 for rasing the possible reason leading to the problem. You guys are great !!
I now have the same problem - I can't install programs (get a message saying installation was unsuccseful), and when I try to remove programs there are none at all in the list.
All I've done today is install sbp Weather.
All programs work fine, but I also can't change Today Theme - it seems to be stuck on default.
Anyone able to help?
Cheers
Rowan
yes I have the exact same issue...this post is about not being able to sync, install, or uninstall anything....while srmz's post was informational, it didn't help those of us who has this problem...
please can anyone help? I really don't want to have to hard-reset my phone
Thanks
Anthony
U shld try M$ As 4.5 version sometimes it happens dat ur device doesn't show u the complete list of prog. installed but with Async it will show u ,from which u can uninstall the prog u want to.
Hi,
I installed the program DciNobar to "play around" with tweaking my K-Jam. I wanted to bring them back so I tried to uninstall the program from Add/Remove programs and it gave an error and asked me if I wanted to remove it from the list which I selected yes to.
I have since installed SoftKeyAppletEX which has given me the option to reset everything to default or remap the keys manually which I have done yet they still do not show on my screen.
I'm thinking that the DciNobar is still starting up, but don't know where to find the key in the regsitry to remove it.
Does anyone have any suggestions?
Thanks
Ari
Not to worry found the solution. Removed dcinobar from the windows startup directory
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?
scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.
niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.
scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.
scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD
it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone
Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You
Here... Install this CAB to the phone
This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks
Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike
ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?
Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks
Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks
As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.
I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??
Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.
Hi,
So, I installed QuickMenu from PocketPC Freewares:
http://www.freewarepocketpc.net/ppc-download-quickmenu-v2-7.html
Problem is what worked with WM6.1 doesn't work with WM6.5. It doesn't start up after a soft reset even though the options are set to start up after reset.
Can anyone recommend an alternative program for QuickMenu that does work in WM6.5?
Thanks in advance.
anyone?
have any alternatives? I'm thinking that there has to be something but searching google for Quickmenu alternatives doesn't lead to anything major.
Any help? Please?
Shortcut in Startup menu
sanjsrik said:
So, I installed QuickMenu from PocketPC Freewares:
http://www.freewarepocketpc.net/ppc-download-quickmenu-v2-7.html
It doesn't start up after a soft reset even though the options are set to start up after reset.
Click to expand...
Click to collapse
I use QuickMenu with WM 6.5.
Check that you have a shortcut "QuickMenu.lnk" in \Windows\Startup.
Quick menu could be used on 6.5. Find the appropriate version
I use this version:
http://forum.xda-developers.com/showpost.php?p=4101818&postcount=28
It works very well on tmo TP2 with stock 6.5 rom.
Apparently there are a few more tweaks needed when using QM on wm6.5 but that cab has done everything needed.
THANK YOU!!! I ve been looking for this forever