Related
Hello,
I have just returned account to me that for some time, I do not receive any more the sms which are sent to me. On the other hand, those which I send arrive well at destination.
Impossible to find since when... nor after which installation... But SMS sends it functioned!!!
I have just made a test to validate the SIM cards, by crossing 2 SIM cards :
The SIM card of my QTEK receives the sms on a "traditional" mobil phone, and the SIM card which received the SMS does not receive them on the QTEK ===> problem with QTEK (SPV M1000).
Would somebody have an idea? Something to check? ... or better: somebody has a solution ? :wink:
ROM : 1.58.00FRA
Radio : 1.07.00
ext ROM : 1.58.06
Thank you for help.
My bet would be that you restored from a backup made by Sprite Backup just before the SMS failures bagan. Correct?
If so, it is a well-known bug in Sprite Backup. To fix it you will have to Hard-Reset your device and restore everything EXCEPT your inboxes.
The new version (3.0) of Sprite Backup has solved this problem.
HTH!
Hello BRosenow,
I think you'r right. The problem began after a retore with sprite backup.
As you it advised it I have just made a backup, then a restore without the inbox of sms... but the problem is always the same one!
Thank's
I believe I had to restore without ANY inboxes. HR again and then make sure you can still receive SMS, then restore everything except email and again verify that SMS works.
If you do a search in this forum for Sprite Backup, you may get additional suggestions.
Thank you very much BRosenow, i try all your solutions ...
Hi,
I restored my sprite backup without any inboxes ... and now it's OK ....
i can receive and send SMS without problem !
I would like really to thank you BRosenow.
It is entirely my pleasure. I'm glad I could help!
If you purchased Sprite Backup, you should be able to download ver. 3 and use your existing registration number to authorize it. Ver. 3 does backup and restore your Inboxes correctly.
Still thank you for your advice... which I will take like the precedents!!!
Hi there,
Using the brilliant SPB Backup on Windows Mobile 5.0 was something that always worked fine and I even needed to restore a backup when something went wrong.
Sure a neat piece of software that I don't want to miss.
On Windows Mobile 6.0 things are a little different. Making a backup works (I didn't try restore, because there's need to yet) but when making the backup is completed, the software comes up with a message that several issues occured.
When click on the info screen to see what issues, SPB Backup says:
Unable to read from file "\Windows\compimeh.dat".
However, the progress bar for backup completion seems to be at 100%.
What type of file is compimeh.dat?
Any ideas of how this problem can be solved? Is my backup truly a backup even without this particular file?
THNX!!
Edit this string:
HKLM\SOFTWARE\Spb Software House\Spb Backup\SkipErrFiles
Add new string:
Name 6
Value: %Windows%\compimeh.dat
You add a new string for all the errors putting the run in exact way
Enjoy..
Worked!!
Thanks!!
Wooo....
This is helpful, thank you for your imput!
Leo
SPB vs. Sprite
Do you also have a solution for Sprite Backup?
Same issue, compimeh.dat!
Where do I put the string there, 'Sprite folder'?
And what about if you skip the errors, does the restore work ok?
Greeting,
Leo
IRREAL said:
Edit this string:
HKLM\SOFTWARE\Spb Software House\Spb Backup\SkipErrFiles
Add new string:
Name 6
Value: %Windows%\compimeh.dat
You add a new string for all the errors putting the run in exact way
Enjoy..
Click to expand...
Click to collapse
Hi all,
Just did a full restore from SPB Backup.
Also had the same compimeh.dat issue.
Everything went just fine. And I must say that I have all my software installed in the storage card.
So, no problem at all with that file.
IMHO, we should not instruct SPB Backup nor any other backup soft to skip the errors, cause at least we know like this that that was a problem in the backup process.
Regards.
Backup
If you restore you will know what that error message meens.
If you trust it that way
Maybe it doesn't restore at all.
You should think about what's compimeh.dat?
Maybe it restore's with errors in apps?
Do you think it is exactly the same as before the backup?
I doubt?
Cheers...
Leo
bizao said:
Hi all,
Just did a full restore from SPB Backup.
Also had the same compimeh.dat issue.
Everything went just fine. And I must say that I have all my software installed in the storage card.
So, no problem at all with that file.
IMHO, we should not instruct SPB Backup nor any other backup soft to skip the errors, cause at least we know like this that that was a problem in the backup process.
Regards.
Click to expand...
Click to collapse
I'm just saying I had the same error... either way I tryed a restore and everything went just fine (without any error).
Now... if you trust it that way, well... it's just up to you, don't you think?
Since the restore I made yesterday, I had no problems at all with any application.
But instead of "You should think about what's compimeh.dat?" (looks like you know what the file is about), you could tell us.
And at least it looks and works like before the backup.
Regards.
Should think about
Sorry for that, it was not my intention to look smart, I'm only trying to say that if compimeh.dat is not included maybe a important part is missing when you restore.
Greetings,
Leo
Hi Guys,
I've fixed the issue above on my Exec but one important feature I really do need that seems to have been lost in the upgrade to WM6 is the ability to use Scheduled Backups. It is critical that I backup at a certain time on a particular day. I know I can do it manually but I can't afford to lose the files concerned if something should happen and I forget!
I can set a scheduled backup with no problem but when the time comes around SPB Backup starts up and then shuts down again right before the actual backup begins.
Any ideas from anyone? Would be much appreciated.
If I can't get this to work I many have to go back to my original ROM.
Cheers
Hello!
I have Jasjar 2.01.08 Wm6 ROM and since I upgraded to Wm6 Scheduled backup doesnt work with SPB.
I have scheduled everyday at 6AM to backup but it doesnt do the job, never did!
Please help!
Deiota
IRREAL
Thanks a lot man for the registry entry. Very Grateful
Laurentius26 said:
If you restore you will know what that error message meens.
If you trust it that way
Maybe it doesn't restore at all.
You should think about what's compimeh.dat?
Maybe it restore's with errors in apps?
Do you think it is exactly the same as before the backup?
I doubt?
Cheers...
Leo
Click to expand...
Click to collapse
I too am a little concerned about applying the registry hack. How come we have to skip it? What is that error anyway?
Compimeh.dat is where your autocomplete words are stored in the dictionary as far as I remember.
Lakota said:
Compimeh.dat is where your autocomplete words are stored in the dictionary as far as I remember.
Click to expand...
Click to collapse
Thanks. If I apply the hack, does it reset automatically after the backup?
New Sunnysoft Backup
Anyone tried Sunnysoft Backup? They have a new version: http://www.sunnysoft.com/software.php?idarticle=245
Chearper here: http://www.pocketgear.com/software_detail.asp?id=3070
IRREAL said:
Edit this string:
HKLM\SOFTWARE\Spb Software House\Spb Backup\SkipErrFiles
Add new string:
Name 6
Value: %Windows%\compimeh.dat
You add a new string for all the errors putting the run in exact way
Enjoy..
Click to expand...
Click to collapse
Thank you very much for this IRREAL.
So the registry entry just skips the compimeh.dat file?
Any freeware utility to edit compimeh in wm6 windows mobile 6?
Does anyone know of any freeware utility to edit compimeh (the auto completion user dictionary) in wm6 (windows mobile 6)?
Lakota said:
Compimeh.dat is where your autocomplete words are stored in the dictionary as far as I remember.
Click to expand...
Click to collapse
I was having the same problem with btdisk.tmp but I always ignored it. It never affected my Uni in an adverse manner, but now that this was posted I can just make that single yellow icon go away . BTW Spb Backup rocks, with its compression and self-extracting backup. I have scheduled mine to take a back up every morning at 3:10AM. You can see the schedule in my screen shot on another thread regarding Universal Today screens.
http://forum.xda-developers.com/showthread.php?t=274873
Hello,
A couple of days ago I ran into serious problems while installing a GPS program. I suspect it whas not compatible with WM6, during the installation it refused to install it on my mem card and failed to install it on my device. Installation aborted and when I selected to have the program removed it removed Mobil shell instead...No problem, I have a good backup from Sprite which gave me different problems. Now I could no longer synchronize my phone with my computer...Finally started with a fresh WM6 and reinstalled all my programs. But as before my Sprite backup gives me a msg that a certain file could not be included...anybody else experienced the same?
Warning:File could not be included: \windows\compimeh.0407.dat
Warning: file could not be included: \windows\lic\Isoma(followed by X amount of O's) ended with .db
cfds said:
Warning:File could not be included: \windows\compimeh.0407.dat
Click to expand...
Click to collapse
DonTworry, WM 6 blocks this file so sprite can not acess it. The file is from HTC Home on Today Screen. The file will be installing by itself after Hardware Reset. I tested that already.
BTW: SPB Backup has same error
Resco releases its brand new application – Resco Backup
After big success of its backup application for Palm OS, Resco announced today the availability of Resco Backup for the PocketPC platform.
In addition to the standard functionality such as manual or scheduled backup, partial backup/ restore, compression or encryption, Resco Backup offers many superior features such as:
• Incremental (differential) backup beats any other backup product in terms of speed.
• Backup profiles (called projects) enable backups of selected data such as messages, contacts etc.
• Ability to verify backup or check backup set integrity
• Tools for backup analysis, e.g. performing a comparison between the device and stored backup set or between any two backup sets.
• Backup sets can have comments, icons or can be pinned - excluded from the update cycle.
It is highly recommended for anyone who does not like to lose precious data.
http://www.resco.net/pocketpc/backup/
You spelled "lose" wrong on the Website
Just a suggestion:
"Never loose your data again"
Where are we loosing it to? The wild?
The word is "lose"
Thanks,
already fixed
good. will try. hope it will become a classic like resco explorer
resco said:
Resco releases its brand new application – Resco Backup
After big success of its backup application for Palm OS, Resco announced today the availability of Resco Backup for the PocketPC platform.
In addition to the standard functionality such as manual or scheduled backup, partial backup/ restore, compression or encryption, Resco Backup offers many superior features such as:
• Incremental (differential) backup beats any other backup product in terms of speed.
• Backup profiles (called projects) enable backups of selected data such as messages, contacts etc.
• Ability to verify backup or check backup set integrity
• Tools for backup analysis, e.g. performing a comparison between the device and stored backup set or between any two backup sets.
• Backup sets can have comments, icons or can be pinned - excluded from the update cycle.
It is highly recommended for anyone who does not like to lose precious data.
http://www.resco.net/pocketpc/backup/
Click to expand...
Click to collapse
xxza said:
good. will try. hope it will become a classic like resco explorer
Click to expand...
Click to collapse
Yesterday we released next version with the desktop unpack tool and couple of other improvements. There is also a nice speed increase, mainly in the restore phase.
We consider this version a milestone as a lot of functionality covering the needs of a vast majority of users is included and the qualitative parameters are more than satisfactory.
Milestone means we are considering things that could be improved - exclusion rules, FTP, registry-related tools etc. We shall be glad if you have any ideas that could help in this respect.
Best regards,
Michal Sartoris
I'm not sure if I'm in the right place, but I have a question about this application.
Yesterday I used Resco Backup v1.11 to create a backup of my messages because I wanted to flash my device (T-Mobile MDA Vario III, a.k.a. HTC TyTN II/HTC Kaiser) and I wanted to keep the SMS messages I had received.
So I unchecked everything but "Messages (E-mail, SMS, MMS)" and did a backup. I then flashed my device and tried to restore the backup, but failed. After that I couldn't even see the SMS/MMS part on my device anymore, and I was unable to send/receive any SMS. The email settings had also been reset and I had to set up my email account again.
I checked the integrity of the backup and I get the popup "Backup Set Integrity. Valid backup set". Then I checked the error log, and got the popup "Backup set. Valid backup set". So I don't think there's anything wrong there.
About the error, when the restoration was finished I got the popup "Error. Restore competed with errors. Try Restore -> Verify to restore just the differences.". At verify it shows the status "OK" at all files except the file "pmailFolders", where the status is "The system cannot read from the specified device."
When I go to Restore -> Verify, most of the files (about 60) show as "Not in device" and about 15 files show as "!=". When I try to restore single files with the status "Not in device" it shows the restore status view and appears to restore several files and then returns to the verify view. However the file still shows up in the verify screen and remains with the status "Not in device". It then requests a reset, and after that reset I have the same problem: The SMS/MMS part on my device has disappeard, and the email account had been removed.
I tried to remove some files from the backup, as I don't really care about the emails since those can be easily retrieved from my email account, however I had no luck there. If there is a way to remove the emails part and only keep the SMS part from the backup I would be willing to try that, as maybe I would have more luck restoring the backup then.
On a side note, I flashed my device with the exact same ROM I had when making the backup, so it can't be an error caused because there are 2 different ROM versions either. The ROM I used was: RUU_Kaiser_VF_UK_3.08.161.0_radio_sign_25.74.40.02_1.64.08.21
I also had a look at the desktop unpack tool, however I have no idea what I should do with the extracted files (which look the same as when you just extract the .zip files of the backup). I can open the files with notepad and read some of the emails/SMS, but as I said, besides that I wouldn't know what to do with them.
Any help would be greatly appriceated. Thanks in advance!
// ScarS
ScarS said:
I'm not sure if I'm in the right place, but I have a question about this application.
Yesterday I used Resco Backup v1.11 to create a backup of my messages because I wanted to flash my device (T-Mobile MDA Vario III, a.k.a. HTC TyTN II/HTC Kaiser) and I wanted to keep the SMS messages I had received.
So I unchecked everything but "Messages (E-mail, SMS, MMS)" and did a backup. I then flashed my device and tried to restore the backup, but failed. After that I couldn't even see the SMS/MMS part on my device anymore, and I was unable to send/receive any SMS. The email settings had also been reset and I had to set up my email account again.
I checked the integrity of the backup and I get the popup "Backup Set Integrity. Valid backup set". Then I checked the error log, and got the popup "Backup set. Valid backup set". So I don't think there's anything wrong there.
About the error, when the restoration was finished I got the popup "Error. Restore competed with errors. Try Restore -> Verify to restore just the differences.". At verify it shows the status "OK" at all files except the file "pmailFolders", where the status is "The system cannot read from the specified device."
When I go to Restore -> Verify, most of the files (about 60) show as "Not in device" and about 15 files show as "!=". When I try to restore single files with the status "Not in device" it shows the restore status view and appears to restore several files and then returns to the verify view. However the file still shows up in the verify screen and remains with the status "Not in device". It then requests a reset, and after that reset I have the same problem: The SMS/MMS part on my device has disappeard, and the email account had been removed.
I tried to remove some files from the backup, as I don't really care about the emails since those can be easily retrieved from my email account, however I had no luck there. If there is a way to remove the emails part and only keep the SMS part from the backup I would be willing to try that, as maybe I would have more luck restoring the backup then.
On a side note, I flashed my device with the exact same ROM I had when making the backup, so it can't be an error caused because there are 2 different ROM versions either. The ROM I used was: RUU_Kaiser_VF_UK_3.08.161.0_radio_sign_25.74.40.02_1.64.08.21
I also had a look at the desktop unpack tool, however I have no idea what I should do with the extracted files (which look the same as when you just extract the .zip files of the backup). I can open the files with notepad and read some of the emails/SMS, but as I said, besides that I wouldn't know what to do with them.
Any help would be greatly appriceated. Thanks in advance!
// ScarS
Click to expand...
Click to collapse
Hi ScarS,
Unfortunately, we have found a bug in restoring emails in v1.11. Have you tried the latest v1.20? If you will still have the problems, please let me know and we will try to find a solution.
Resco Backup makes copy of massages using database API. This means enumerating all databases in volume file (for massages it is cemail.vol), then enumerating records in the database and write it to backup. Restore will create database which is stored in the backup or if it already exists removes all its records. Then it writes stored records back to database. Unfortunately, creating new records in the databases will create new IDs of these records and mail databases have relations based on this IDs. At the end of restore, Resco Backup tries to replace these relations with newly generated IDs (they are generated by system and cannot be changed). This is the reason, why backup is different after restore.
Deleting some files from backup set to leave just SMS/MMS will not help util you know the structure of these databases. E.g. database with name pMailFolders contains information about all accounts (ActiveSync mail account, SMS/MMS accounts, other mail accounts) with all their settings and folders (e.g. Inbox, Outbox, etc.). Each of this folder has related database calld fldrXXXXXXXX where XXXXXXXX is ID of the folder stored in the pMailFolders database. Each of these folder databases have records pointing to pMailMsgs database where information about messages is stored. Names of files, where message bodies and attachments are stored are made from IDs of records of that messages so when ID of message in the database change during restore, name of the file must be changed as well.
Currently information about databases extracted from backup using desktop unpack tool is useless and is there just for information.
Best regards,
Michal Sartoris
Thanks for the quick reply with detailed information I have just tried v1.20 and tried to restore the backup made with v1.11, however I got the same problem.
Was the bug in v1.11 in the backing up part, or in the restoring part? Because if it is in the backing up part it would make sense that it wouldn't work because then the backup is corrupt.
Before I restored the backup made with v1.11 I made a backup of the current data with v1.20 and also made clone (with another application). After the restoring of the old backup failed I tried to restore the new backup however that failed aswell. Maybe because due to the previous restore (the backup made with v1.11) some settings were 'messed up'? I then used the clone I made to restore my device to the way it was before I installed v1.20.
Eventhough it would be nice to have the data back, it were only about 25-30 SMS that were backed up which I would like to restore and they arn't too important, so if I would end up not being able to it wouldn't be a complete disaster. So if it would take up a lot of your time and you have not had similar problems I wouldn't mind if you discard my problem. I am using a trial version, so I havn't paid for support either.
Thanks for the reply so far, I really appriciate it
// ScarS
resco please read the mail that I have sent to you through private message..Thanks
Backup sussefully done but restoration always gave error. It wont return to the original stage , so I continue using Spb backup which is more accurate for backup and restoration after hardreset.
theme freak said:
resco please read the mail that I have sent to you through private message..Thanks
Click to expand...
Click to collapse
Hi,
your problem has been sent to the right person.
Best regards,
Michal Sartoris
edywanwan said:
Backup sussefully done but restoration always gave error. It wont return to the original stage , so I continue using Spb backup which is more accurate for backup and restoration after hardreset.
Click to expand...
Click to collapse
Hi,
Could you please specify, what error it is?
Best regards,
Michal Sartoris
ScarS said:
Thanks for the quick reply with detailed information I have just tried v1.20 and tried to restore the backup made with v1.11, however I got the same problem.
Was the bug in v1.11 in the backing up part, or in the restoring part? Because if it is in the backing up part it would make sense that it wouldn't work because then the backup is corrupt.
Before I restored the backup made with v1.11 I made a backup of the current data with v1.20 and also made clone (with another application). After the restoring of the old backup failed I tried to restore the new backup however that failed aswell. Maybe because due to the previous restore (the backup made with v1.11) some settings were 'messed up'? I then used the clone I made to restore my device to the way it was before I installed v1.20.
Eventhough it would be nice to have the data back, it were only about 25-30 SMS that were backed up which I would like to restore and they arn't too important, so if I would end up not being able to it wouldn't be a complete disaster. So if it would take up a lot of your time and you have not had similar problems I wouldn't mind if you discard my problem. I am using a trial version, so I havn't paid for support either.
Thanks for the reply so far, I really appriciate it
// ScarS
Click to expand...
Click to collapse
Hi ScarS,
The bug was in the restoration part.
Have you noticed the error description immediately after restore? When restore ends it displays a list of all restored items with a short description. Errors have red text and are listed first.
The error you had after verify means that read (probably from zip) failed. Are you able to copy the files stored in the backup somewhere else using file browser?
Unfortunately current integrity check will not catch all problems. It just reads crcs from all zip files and compares them with one stored in separate file.
Would it be possible for you to send me your backup? I understand if not as such data are very sensitive.
Best regards,
Michal Sartoris
For Rom Junkies?
Hi there resco, I currently use "sprite backup" because it has the ability to restore after a rom upgrade and also to a new device. I can't say that it is without bugs, can you tell us how your product performs in theese actions please?
uniqueboy said:
Hi there resco, I currently use "sprite backup" because it has the ability to restore after a rom upgrade and also to a new device. I can't say that it is without bugs, can you tell us how your product performs in theese actions please?
Click to expand...
Click to collapse
Hi,
Currently, Resco Backup does not have such a feature. When you try to restore on different device/ROM, you will be warned, but you can continue to do so.
Personally I have tried a few times to restore backup from one device to another and it looked ok. But I did not check it into details. E.g. I have succeeded to restore SMS on device without phone
Best regards,
Michal Sartoris
Hello,
I would appreciate ANY help on this matter. Yesterday i had no choice but to hard reset my phone. I always backup my phone every night, and thought (at the time) thank god! However, when i went into my sd card and clicked on the .exe file to restore the backup....it came up with an error message saying:
"The file Backup.exe cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Isnt this type of file meant to self restore without the original program....seeing as i dont have the copy of sprite backup after hard resetting?
ANY help would be greatly appreciated! Thank you in advance.
If it helps the version of sprite backup i had before everything went haywire was Sprite Backup, HTC edition V6.2.3, Build 2330 (my paranoia makes me write these type of things down elsewhere)
THANKYOU again!
as far as i experience backup procedure
hi..
.. as far as i have experience ....sprite backup procedure ( there might be alternatives ...that i am not aware of but..) on my kaizer... for past 2 yrs and now ..blackstone..(hd ) you can only restore backup through sprite program..(installed on storage card or from sprite progam that should also be installed automatic with original installation on pc..?)i have found that i could also not click on.. backup .exe directly with stylus (i wanted to move .exe to another file...as it would freeze phone..but had to do it with pc...(cut and paste..etc..)i had to also ,when doing restores in the past ..open sprite program and select restore from within ....etc...
thus..i suggest..
if you do not have software any more on phone...is it not possible to get copy and re install it again ..and then try to do restore... selecting your original.exe you still have on sd card ...( i have done this once or twice ..and it worked for me ..but also .. failed a few times ..!! why i dont know...?)
...also as a safety measure i would copy backup.exe to pc.(temporary also.)..and work from there..?
what about checking sprite website mabe for clues or answers...??
hope it works for you..
good luck..
unfortunately i went to their website and downloaded the latest and only version they have which is higher than my old one and it could still not read the backup file. It must only work for the version i originally had.
Thank you anyway
Novice Gadget Boy said:
unfortunately i went to their website and downloaded the latest and only version they have which is higher than my old one and it could still not read the backup file. It must only work for the version i originally had.
Thank you anyway
Click to expand...
Click to collapse
Hey dude,
I know the feeling, I think I may have the same version at home so will check it after work and send it