Related
The italian Sicve Tutor system checks that the mean speed of vehicles between verification "portals" is below the speed limit (tipically 130 km/h) . Tutor Assist uses GPS to get the car current speed and helps the driver by:
- signalling current speed above speed limit condition;
- computing mean speed;
- signalling mean speed above speed limit condition;
- suggesting the speed to keep for a selected time in order to make the mean speed go below the limit;
- computing the distance required at the current speed for the mean speed go below the limit.
Tutor Assist can be integrated with TomTom Navigator to make easy the switching between them (for advanced used, some tweaking is required).
Many thank's!!
per quello che c'è in giro ci voleva proprio, questi veramente non ci vogliono far camminare più, è assurdo!!!
è possibile integrarlo nel 4 menù sdkregistry tomtom e una traduzione in italiano?
tante grazie
for what is around wanted us really, these really they don't want to make us walk more, is absurd!!!
is it possible to integrate in the 4 menù sdkregistry tomtom and a translation in Italian?
so many graces
help
salve, volevo sapere se questo programma funzionerebbe su un palmare htc p4350 e come dovrei farlo riconoscere.
Grazie
I have some questions... compliments however for this great app..
What exactly does the pause button?? my count has been resetted after i have pushed it.
and... during the pause period, the time is taken under consideration (with speed=0) ?
SkizZO said:
What exactly does the pause button?? my count has been resetted after i have pushed it.
and... during the pause period, the time is taken under consideration (with speed=0) ?
Click to expand...
Click to collapse
The program has two status, paused and active, and the Start/Pause button is to toggle between these two status.
During the paused status the program does nothing but show current speed. During the active status the program computes the mean speed starting from the moment the Start button was pressed.
Therefore, the program should normally be kept in the paused status. On entering a Sicve Tutor controlled road segment the Start button should be pressed to start mean speed computation and check. On the controlled road segment end the Pause button should be pressed to reenter the paused status.
Ok, so if i go to an "autogrill" i haven't to touch anything... i hope the app calculate the mean also if the gps loose the fix (in a build 4 example)
...some Hints:
..What do tou think about a POI Proximity Alert? (in ov2)... so that the app give an alert when an autovelox/sicve is near.
..the possibility to change the speed limit?
and... in italian (a request for a traffic info app) :
Che ne pensi, se hai voglia, di fare una piccola applicazione che recupera dei dati da pagine html di autostrade.it e li ordina in tabella??
Guarda:
http://www.autostrade.it/autostrade/popupTelecamera.do?tlc=160
ora alla fine metti 161 e così via... basterebbe solo il numero della cam e la località (dice anche se è fuori servizio) in tabella...
Poi cliccando si potrebbe vedere la traffic cam (sono 4 immagini in sequenza)
Sarebbe un'altro UTILISSIMO programma
do you have read? are you italian? so i'll translate it in english...
Please let me know if you or everyone can do this simple app! (complicated for me)
Thanx!
the program doesn't see my gps antenna
Hi,
I think your program could be very helpfull but, unfortunatly, I can't use it because It doesn't see the gps antenna.
I have a HTC Tytn with an external bletooth gps antenna (royltek sirfstar III) and I choose on your program the com port on wich the antenna is configureted (com9) but on the main window of the program appears this message in red: "error: com port COM9: is not on".
The antenna works correctly wich every other progra that need it (tomtom, igo and others).
Could you hlp me to solve the problem?
I am longing to use your program!!
Tank you very much.
Try to go to Programs->Settings->External gps settings, and assign a virtual com port to the ORIGINAL HW port (i hope you use com9)
So assigning a redirect from COM9 to COM6, you should use the com6 in all gps programs, also if there are 2 or + gps apps opened.
Thank you for the answer!
I'm not sure I have understand.
I've gone to External GPS (wich is in Settings and not in Programs in my device) and I've found 3 labels: Programs, Hardware and Accesso (I'can't translate in English, sorry).
In the label 'Programs' the gps port is GPD8 and in the label 'Hardware' is COM9.
How could I "assign a virtual com port to the ORIGINAL HW port" ?
And, then, how could I "assign a redirect from COM9 to COM6" ?
Thank you very much again
Ok, i've done this: I've gone to External GPS.
In the Hardware label I left the com port number 9.
In Programs label I changed the GPD port in number 6 and Ichoosed the port number 6 in sicve application.
Now in the software the error message is changed (now is "Error: could not open com port") but is still an errore message!!
It seems the software can't find the bluetooth GPS antenna.
Help please!!
try to use the settings that you now have with VisualGPSCE, if it work, don't close it and open also Tutor Assist.
@ouram: my proposal is still valid!!!
tutor assist fot smartphone
oruam57 said:
The italian Sicve Tutor system checks that the mean speed of vehicles between verification "portals" is below the speed limit (tipically 130 km/h) . Tutor Assist uses GPS to get the car current speed and helps the driver by:
- signalling current speed above speed limit condition;
- computing mean speed;
- signalling mean speed above speed limit condition;
- suggesting the speed to keep for a selected time in order to make the mean speed go below the limit;
- computing the distance required at the current speed for the mean speed go below the limit.
Click to expand...
Click to collapse
Can somebody tell me if exist any smartphone version of this very clever software? Thanks.
Upgraded to version 1.2
Now it can be integrated with TomTom Navigator.
Dear OURAM
Are tou sure you don't want to make an app to monitor the Italian Highways Traffic cams???
And... what exactly does the TT Button??? Nothing happen to me; also if i launch the 2nd executable ftom program dir, it give me an error
Problem use Tutor Assist
Good day, i've install your software in my HTC without problem, when i go to set Serial port i've some error,like Status : Running NotSet.
I'use Com 9 like port and Baud Rate 9600.
This problem happens with a Tom Tom GPS and with another GPS Receiver.
What's wrong in my setting ?
Kind Regards
I have the same problem....
tutor assist??
i have the same problem!
ho il medesimo problema.
cambiando i settaggi, inserendo tutor nel sdkregistry di tomtom6.020 e avviandolo non succede mai nulla.
resta sempre in "running not set"!!
sicuri sia la com9?? io ho mio a701 con gps integrato.
porta com e banda dovrebbero essere le stesse che utilizza il tomtom?
ciao grazie vikkvikk
Is there a way to use this excellent application on my Diamond?
I used it on Trinity and it was just great, bu now on Diamond I have an error message...
After I make the setup (Port: Com4, Baud rate=I tried every value but I think the correct one is 4800) I have the following red message in the top left of the screen: "Error: Error in process_gpvtg".
I tried the app on my friend Diamond too and the result was the same...
I noticed that the error message does not appear when I launch the application from inside my home... Maybe this mean that the problem is in the comunication with the satellites... I really don't know...
Any idea on how to solve the problem?
Thx in advance...
...I've ever made.
It took me 2 nights toget it all right. It's very functional layout with almost all possible characters available from the main screen, all editing buttons as well (del,home,Ins etc) just like in hardware keyboards. Press and hold on key to access additional functions, for example press and hold "e" for: E,ę,Ę,enter,escape,and commonly used words like end,else. Try it yourself, you'll see what I mean!
You can access the editing buttons by pressing and holding on enter and space keys,too.
In the number pad mode, if you press on + you get get all the math signs, comma for commas, etc. Then there are two cool features: one is pressing and holding on any number brings access to letters (like in your mobile phone) , pressing shift brings you back to letter pad (good for passwords etc.
I'm switching back to The Other SIP,so no more support from me on that. I'll still be using it for Polish characters, though. Enjoy!
No copyright Feel free to copy, link, chop, whatever If someone is nice enough to post it on PCM forum, more people may have access to it. Just mention my name, please. Cheers!
---POLISH---
Bardzo funkcjonalny uklad klawiaturyz polskimi znakami. Prawie wszystkie mozliwe znaki lacznie z klawiszami funkcyjnymi typu del,end itd. sa dostepne z glownego ekranu. Po nacisnieciu i przytrzymaniu klawisza dostepne staja sie funkcje dodatkowe: np "e" daje E,ę,Ę,enter,escape, i czesto uzywane slowa jak: end,else. Sam sprobuj a zobaczysz.
Dodatkowo dostep do klawiszy funkcyjnych po nacisnieciu i przytrzymaniu enter i spacji.
Na drugim ekranie - numerycznym - dostep do matematycznych znakow po przycisnieciu i przytrzymaniu plusa, do nawiasow - nawiasu itd. Jesli przytrzymasz cyfre, dostep do liter. Podobnie jak w telefonie komorkowym. Shift wraca na chwile do liter - przydatne przy wpisywaniu hasel.
Wracam do innego SIPa, wiec nie bedzie dalszego rozwoju tego ukladu. Wydawal mi sie na tyle dobry, ze chcialem sie ze wszystkimi podzielic. Pozdrawiam.
Proszę przerabiac i rozpowszechniac do woli. Moze ktos moglby przykleic linka do forum PCM? W ten sposob wiecej ludzi mogloby skorzystac. Prosze tylko wspomniec moje (dobre) imie
Hello
Is there any app for wm similar to DOCSCANNER from ipho**???
It takes the picture from the camera, and does a recognition.
That app is at docscanner dot com. (no publicity intended!)
SO???
THanks.
Sprint packaged a Bizcard reader with the TP2s...or did you wants something more paper sized read?
The bizcard reader from sprint works great for cards, but is there a software that could recognize text from a book or magazine and save it to a text file?
Wow that would be seriously cool
they have a business card reader for touch pro 2? whats it called.
The Business card scanner on sprint is WorldCard Mobile.
v 1.0f.090225b
http://www.penpower.net/usa_inc/
emipop said:
Hello
Is there any app for wm similar to DOCSCANNER from ipho**???
It takes the picture from the camera, and does a recognition.
That app is at docscanner dot com. (no publicity intended!)
SO???
THanks.
Click to expand...
Click to collapse
Creo que el programa que te sirve es Scan.2PDF.Mobile. Es muy buen programa. Exitos.
How about this?
http://www.qipit.com/
As far as I can tell neither
Scan.2PDF
OR Qipit
does character recognition so that it can be saved as a text document.
There's ScanR which seems to provide some OCR. Unfortunately it's a subscription service. Quite cheap though if you are really going to use it. Don't know how well it works as I haven't tried it yet.
There also seems to be TopOCR. and ABBYY has recently released a mobile ocr engine so hopefully programs using it will come out soon.
You can try this free OCR :
http://www.topocr.com/mobile.html
It's not for WVGA
Evernote automatically OCR-es your snapshots that you upload to it, and indexes them .. and even works on hand-writing (see attachment) .. and on top of it all .. it's FREE!
Oh and just for the record (pun intended!) .. it indexes other things too, besides pictures: text notes, voice notes, ink notes, etc.
I have just purchased PrinterShare Premium, and although it will print PDF and JPEG files to my HP wireless printer, something funky is happening with documents created on the Iconia. From online research it seems that other people have had similar problems with the Xoom.
Here's the problem. If I create any Word or Excel with the Documents to Go app they will not print. I either get rendering errors “docs render error 256“ (Word) or the document will print with the wrong text such as lines of the word GENERAL replacing my text (Excel). However if I print the same document created in Word or Excel on another PC it prints fine through Printershare.
I am wondering if this a Honeycomb problem - I sent an inquiry to their customer support but have not heard back from them yet. I'll report back any solutions if they have some to offer.
Thought I'd post a heads up here before anyone else spends $12.95.
UPDATE
Tried the same configuration on my Galaxy Tab with similar results. So it looks like the conflict is with Documents to Go.
But, I have discovered that Documents made using the Google Docs app will print fine with PrinterShare. So, at least there is a workaround of sorts.
VitaZora said:
I have just purchased PrinterShare Premium, and although it will print PDF and JPEG files to my HP wireless printer, something funky is happening with documents created on the Iconia. From online research it seems that other people have had similar problems with the Xoom.
Here's the problem. If I create any Word or Excel with the Documents to Go app they will not print. I either get rendering errors “docs render error 256“ (Word) or the document will print with the wrong text such as lines of the word GENERAL replacing my text (Excel). However if I print the same document created in Word or Excel on another PC it prints fine through Printershare.
I am wondering if this a Honeycomb problem - I sent an inquiry to their customer support but have not heard back from them yet. I'll report back any solutions if they have some to offer.
Thought I'd post a heads up here before anyone else spends $12.95.
UPDATE
Tried the same configuration on my Galaxy Tab with similar results. So it looks like the conflict is with Documents to Go.
But, I have discovered that Documents made using the Google Docs app will print fine with PrinterShare. So, at least there is a workaround of sorts.
Click to expand...
Click to collapse
I use this free web app http://jsoftunlimited.com/webprint/
it even allows me to forward an email for printing
check it out!
VitaZora said:
I sent an inquiry to their customer support but have not heard back from them yet. I'll report back any solutions if they have some to offer.
Click to expand...
Click to collapse
I finally heard back from Customer Service:
"These document rendering errors occur when trying to print documents created/modified with mobile office applications. Error 256 occurs for doc files and 64 for docx files. Quickoffice docx files hang during rendering. The errors should not occur for microsoft office created/saved files. At the moment only OfficeSuite Pro doc (not docx) files are rendered without errors. We are working on resolving this issue, please accept our apologies for the inconvenience."
VitaZora said:
J'ai enfin eu des nouvelles du service client :
"Ces erreurs de rendu de documents se produisent lorsque vous essayez d'imprimer des documents créés/modifiés avec des applications de bureau mobile. L'erreur 256 se produit pour les fichiers doc et 64 pour les fichiers docx. Les fichiers docx Quickoffice se bloquent pendant le rendu. Les erreurs ne devraient pas se produire pour les fichiers créés/enregistrés par Microsoft Office . Pour le moment, seuls les fichiers doc OfficeSuite Pro (pas docx) sont rendus sans erreur. Nous travaillons à la résolution de ce problème, veuillez accepter nos excuses pour le désagrément occasionné."
Click to expand...
Click to collapse
Hello did you find? because I have the same problem thank you.
Darkmo said:
Hello did you find? because I have the same problem thank you.
Click to expand...
Click to collapse
Please be aware that this is a 10 year old thread and none of the members who posted here was active for years.
Oswald Boelcke said:
Please be aware that this is a 10 year old thread and none of the members who posted here was active for years.
Click to expand...
Click to collapse
Yes, I just found out, thank you
So it appears that if you have SPRO firmware you need to pay to upgrade to CC2. Like to do it for free.
Also voice activation is not free. I noticed on 4pda that it looks like it is doable, however the translation is poor and it's hard to confirm. Anyone has success?
https://4pda.ru/forum/index.php?showtopic=936715
Like to do it for free.
Click to expand...
Click to collapse
It is possible for the old firmware only. Or install SPRO firmware with the deactivated CC2 applications.
Anyone has success?
Click to expand...
Click to collapse
No one.
Thanks, same launcher as CC2?
wooldogsinc said:
Thanks, same launcher as CC2?
Click to expand...
Click to collapse
Yes, the following firmware has both CC2 launchers. And the root access, changing launcher application, a radio with station logos and NoKill mod of ms.apk also. Check this: 4pda[dot]ru/forum/index.php?showtopic=936715&view=findpost&p=92203136
KёniG said:
Yes, the following firmware has both CC2 launchers. And the root access, changing launcher application, a radio with station logos and NoKill mod of ms.apk also. Check this: 4pda[dot]ru/forum/index.php?showtopic=936715&view=findpost&p=92203136
Click to expand...
Click to collapse
Looks like someone has done it. Able to install CC2 firmware on SPro without activation
Check the latest CC2 version 4pda[dot]ru/forum/index.php?showtopic=936715&view=findpost&p=95267151
Has anyone gone and done the transition to CC2. Even through payment?
yuhenyo said:
Has anyone gone and done the transition to CC2. Even through payment?
Click to expand...
Click to collapse
Yes I have without payment.
wooldogsinc said:
Yes I have without payment.
Click to expand...
Click to collapse
How? What instructions did you follow?
1. Prepare a blank USB
2. Find out if you have a g32 or g23
3. Download the firmware
4. Place it on usb, unzip place on / of drive
5. Delete the files in this post
6. When insert the usb upgrade should begin
https://4pda.ru/forum/index.php?showtopic=964473&st=2760#entry95248910
@KёniG can you explain in English what the NoKill mod and other mods are. Tried to understand but it's a bit hard to with the 4pda translation. Thanks
wooldogsinc said:
@KёniG can you explain in English what the NoKill mod and other mods are. Tried to understand but it's a bit hard to with the 4pda translation. Thanks
Click to expand...
Click to collapse
NoKill prevents killing processes after the head unit goes to sleep. When it wakes up applications still work. Which other mods you are interested in?
yuhenyo said:
Has anyone gone and done the transition to CC2. Even through payment?
Click to expand...
Click to collapse
KёniG said:
NoKill prevents killing processes after the head unit goes to sleep. When it wakes up applications still work. Which other mods you are interested in?
Click to expand...
Click to collapse
Oh yeah. That would be awesome. Will be installing that one.
I think the dialer is the only one, it just pops up when there is a call hey?
wooldogsinc said:
it just pops up when there is a call hey?
Click to expand...
Click to collapse
Call window pops in a small window in the bottom (not in the full screen) in the described applications.
Please refer the following video for greater details:
Hi there everybody! I have aqquired a CC2-SPRO head unit recently and, despite i have inserted a cell phone chip in it, i am having troubles to use it to make phone calls regardless the bluetooth. The call is completed but the sound does not get the speakers! Please, show me how to overcome this issue! Tks...
Do you think this would be the same process with the SPRO+? I assume this is just updated hardware? Also any able to upgrade to the CC3 software?
lrietz said:
Do you think this would be the same process with the SPRO+? I assume this is just updated hardware? Also any able to upgrade to the CC3 software?
Click to expand...
Click to collapse
Possible from CC2 plus but looks more trouble than its worth at moment.
Some features will work, some won't.
Trippy intro is cool, very futuristic space theme. - I'd like to hear it in English & oral rundown of the CC3.
I translated 'it works but has a few troubles' Good thing if it doesn't work to your liking, it's possible to do a kind of flash reset, returned to the original CC2 plus.
Good luck whatever you decide.
Hello there !
I got a cc2plus and desperatly looking for some help ...
1 - odb
I bought odb adapter with the unit from teyes too, the odb adapter seems to work because I can see it on my phone and can pair with it using 1234 as pair code
But when I start the OBDII app on the teyes cc2plus, it just says "no device binding". I think it does not find the obd adapter...
2 - bluetooth music
The bluetooth music player app does not allow me to control music on the home, there is no widget. All the widgets control localy stored music, no bluetooth music
3 - android auto
I tried everything, upgrading android auto on cc2plus, setup android auto on my phone, on my wife phone, I tried every different usb port, nothing works.
The android auto does not recognize cc2plus when I plug usb cable.
4 FM Tuner RDS
FM tuner does not show RDS names, only frequencies numbers. Really annoying.
5 ok google
don't know how to make it work ... I have a mic icon on upper top right, but when I click on it, nothing happens.
When I use the visual keyboard, I press the microphone button, nothing happens either.
I am, at the moment, extremly disappointed about this unit, all I wanted was :
bluetooth music play : works but not handy at all
android auto : dont work
ok google : dont work
odb car diagnostic : dont work
Only google maps works but I have to share my phone data using wifi sharing, which is battery intensive. If I could make android auto works, that wouldn't be needed.
I hope someone can help me there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
You prob have it all sorted out but if you're still a bit stuck i may be able to point you in right direction.
Did you download 'HeadUnit Reloaded' from Google play to open Android Auto on the device and choose wired USB from the options on uploaded image? The Trial is a bit buggy,
(I wonder why? ) but it Definitely works if you want to buy the paid version.
Set Wireless Projection to 'On' on phone settings and there are detailed videos on Youtube on 'JansenVlog' YT Channel with all the information re: Android Auto.
You open the AD2P Blutooth music app and pair your phone so that even music metadata shows Artist, Album & song info on device display.
Google assistant should be ok too as long as your phone is synched.
Good Luck.
EDIT:
My Bluetooth Music streaming incl metadata
(sorry sun was shining right on screen but its readable at least)
I dont know if you can, or would want to change this particular U.I. ?
Also regards voice control, the English T'eyes Voice app looks well up to the task.
If you review your device on whichever website you purchased it from & upload 5 photos, get in touch with seller and see if it can be activated for your troubles.
tamere22 said:
Hello there !
I got a cc2plus and desperatly looking for some help ...
1 - odb
I bought odb adapter with the unit from teyes too, the odb adapter seems to work because I can see it on my phone and can pair with it using 1234 as pair code
But when I start the OBDII app on the teyes cc2plus, it just says "no device binding". I think it does not find the obd adapter...
2 - bluetooth music
The bluetooth music player app does not allow me to control music on the home, there is no widget. All the widgets control localy stored music, no bluetooth music
3 - android auto
I tried everything, upgrading android auto on cc2plus, setup android auto on my phone, on my wife phone, I tried every different usb port, nothing works.
The android auto does not recognize cc2plus when I plug usb cable.
4 FM Tuner RDS
FM tuner does not show RDS names, only frequencies numbers. Really annoying.
5 ok google
don't know how to make it work ... I have a mic icon on upper top right, but when I click on it, nothing happens.
When I use the visual keyboard, I press the microphone button, nothing happens either.
I am, at the moment, extremly disappointed about this unit, all I wanted was :
bluetooth music play : works but not handy at all
android auto : dont work
ok google : dont work
odb car diagnostic : dont work
Only google maps works but I have to share my phone data using wifi sharing, which is battery intensive. If I could make android auto works, that wouldn't be needed.
I hope someone can help me there
Click to expand...
Click to collapse
1. I got my ODB working after several tries. I had to go to Bluetooth config first to set it up and press an icon to connect it. Then you have to wait some time for the app to properly work. Sometimes I needed to reload the radio.
2. I highly recommend you to use some other launcher like Nova Launcher. Then you will have plenty of customizations available and widgets.
3. Try 'HeadUnit Reloaded' but I tried it and didn't like Android Auto in general. I use a lot of different apps directly in the radio with no problem, like Vanced Youtube (no adds), AIMP, Prime Video, Google Maps, etc.
4. In my case, when I select the radio station it fills in the name. I'm in Spain.
5. I installed "Google Assistant" and I can launch it by one icon in my launcher, but also I've managed to set a steering wheel button to launch it using https://github.com/hvdwolf/FytHWOneKey
Some other apps I recommend you to try:
Twilight
Overlays - Floating Apps Launcher
better Radio : https://forum.xda-developers.com/an...its/dev-navradio-app-allwinner-units-t4024701
Basically the FYT-Starter apk contains both the Setup entry point and the default one that is used to automatically start the apps at ACC_ON.
If your launcher shows only 1 entry in the app list, you can install the second apk (FYTStarterSetup) which starts the setup screen directly
Attached Files
FYT-Starter_1.01.1907081605.apk - [Click for QR Code] (199.7 KB, 396 views)
FYTStarterSetup.apk - [Click for QR Code] (15.1 KB, 320 views)
Emulator Android Auto:
https://forum.xda-developers.com/ge...ndroid-4-1-headunit-reloaded-android-t3432348
https://forum.xda-developers.com/an...ad-units/teyes-cc2-headunit-reloaded-t4111035
Some other links (some translations from Russian to Spanish, sorry)
Nokill.apk y Automatización con Macrodroid para tener a la vez el navegador, el anti-radares, etc.
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=es
Auto Brightess , brillo de la pantalla por
control de volumen de la aplicación GPS
Fix TTL (distribución de la radio)
ˇModificaciones de com.syu.ms.apk (NoKill / detectores de radar / marcador)
ˇFYTStarter (ejecución automática)
DVR SynCarKit_TZY_20190424.apk (Teyes)
ˇSpeech (Teyes) ¡ Funciona solo con firmware CC2 / SPRO no antes del 29/07/2019!
ˇAplicación de configuración del sistema (Omega_kz)
Medir la temperatura de la CPU
MOD: Aplicación de inicio para el firmware CC2 28/11/2019
ˇColección de software de la unidad principal
ˇMusicProxy (reemplazo del reproductor normal por otros de terceros)
Modificación de la aplicación Archivos / Reproductor / Cámara
Conexión a PC
ˇEntrenamiento de las teclas del volante para la función Atrás
ˇProcesos iniciados después de despertar
ˇEjecución de scripts después de flashear con derechos de administrador
ˇDesactivar la verificación de licencia de la aplicación
ˇCómo modificar boot.img (ejecución automática, root)
ˇInstrucciones para editar aplicaciones del sistema
ˇCómo evitar la finalización de los procesos y aplicaciones necesarios cuando la GU entra en suspensión
ˇDescripción de volver a empaquetar el archivo con aplicaciones Allapp.pkg, con datos cambiantes de la aplicación