Database Users

batch commands from PPC

if i have batch commands in a file is there any way to run that file on PPC? like in good old DOS days we were able to put extension as ".BAT" to the file and that will run all commands in batch. can we do the same on PPC?

Have a look at Mortscript...
http://www.pocketgear.com/software_detail.asp?id=13738
regards - Mallow1

also nscriptm. i've been using that. http://www.pocketpcfreewares.com/en/index.php?soft=603

thanks for quick reply. i guess s/w mentioned should suffice my requirement.

Hi! i have an interessant script to purpose:
#Start GpsGate
Sleep 3200
Run \Storage\Franson Gpsgate\GpsGateCE.EXE
Sleep 1800
#Choice menu and other programs (default: tomtom after 5 sec.)
ChoiceDefault Select,Select Navigator,1,5,TomTom Navigator,iGo Europe 2006,iGo Europe 2006 + GpsDash,TomTom Navigator + GpsDash
Case 1
Runwait \Scheda di memoria\Navigator\TomTom Navigator.exe
sleep 200
Case 2
Runwait \Scheda di memoria\iGO 2006\iGO.exe
Sleep 400
Case 3
Run \Scheda di memoria\WiMobi.com GPSdash2\GPSdash2.exe
Sleep 6600
Runwait \Scheda di memoria\iGO 2006\iGO.exe
Sleep 400
Case 4
Run \Scheda di memoria\WiMobi.com GPSdash2\GPSdash2.exe
Sleep 6200
Runwait \Scheda di memoria\Navigator\TomTom Navigator.exe
Sleep 100
EndChoice
# Check active programs (gpsgate doesn't close if a virtual com is used)
if wndExists "GPSdash2"
Show "GPSdash2"
While wndExists "GPSdash2"
Sleep 1000
EndWhile
EndIf
#Close gpsdash
Sleep 700
MouseClick 195,309
Sleep 400
MouseClick 169,309
#Switch PocketZenPhone profile
Sleep 600
MouseClick 160,40
Start GpsGate (by PZP profile with Bluetooth)
Make a choice (Tomtom, Igo, tomtom + gpsdash, igo + gpsdash)
Wait for closing a navigation software (tomtom or igo)
Check if there is gpsdash opened (if true, wait for close, then close gpsgate)
else close gpsgate
switch pzp profile to "normal"
Ps: "Close" command leave a blank icon on traybar, i preferred to close gpsgate with taps on the screen. To adjust coordinates, make a screenshot, open it with paint and see the coordinates in bottom right)
PPS: check programs dirs!

Need your Help
dourediff said:
if i have batch commands in a file is there any way to run that file on PPC? like in good old DOS days we were able to put extension as ".BAT" to the file and that will run all commands in batch. can we do the same on PPC?
Click to expand...
Click to collapse
I`ve the following problem. I´m using HTC Diamond. Due to the memory size i alway using cleanram before running IGO.
I need now an batchfile which runs first cleanram and after that starts IGO8.
So ist there anybody who is able to help me with my problem
regards
Axel

GPS receiver reset utility

Sometimes GPS receivers (at least my Hamlet HBTGPS20) stop working correctely (no or unstable fix). Hamlet advice is to reset it using a desktop Windows program that they provide. Unfortunately, this requires a BT enabled desktop or laptop PC. Very unpractical indeed!
Therefore, I developed this small utility to reset GPS receivers. It should work on any device with .NET Compact Framework installed and for any BT serial port GPS receiver.
Installation:
1 - extract the files from GPSReset.zip
2 - copy GPSReset.cab to your device
3 - run it, a shortcut to GPSReset.exe should appear inside Programs
or
2 - copy GPSReset.exe and OpenNETCF.dll wherever you want in your device (but not \Windows)
3 - create a shortcut to GPSReset.exe
Usage:
1 - check that BT is enabled and that the GPS receiver is on
2 - run GPSReset
3 - select the serial port and and the baudrate of your GPS receiver
4 - click the Open button and wait for the Reset button to become enabled (or for an error message)
5 - click the Reset button
6 - click the Exit button, that's it
After reset it might be necessary to execute again the BT pairing procedure with the receiver.

Arabic Technical Support
If you’re an IT provider and you would like to target the Arabic speaking market, or you are an end user that requires Arabic interface in your application, Mughamrat is your gateway to the Arabic language.
Mughamrat is a Software Development Company that specializes in converting information technology products to support Arabic for both interface and functional levels of any system and platform.
the portfolio of products includes SDKs such as WAL, PAL and MAAL, which consist of extensive set of programming tools, utilities, and libraries that allow developers to build and integrate standard Arabic applications (With MS Embedded tools and MS Dot NET tools) into the Windows CE system or GSM platforms. Likewise, we have dedicated highly qualified department for all kinds of localizations such as software Arabic localization, content localization, and Arabic Web localization. More information about our activities in our website: www.mughamrat.com.
Contact info
Rudy
[email protected]

Mitico!!
L'ho provato sul mio Mypal 632n
oruam57 said:
Sometimes GPS receivers (at least my Hamlet HBTGPS20) stop working correctely (no or unstable fix). Hamlet advice is to reset it using a desktop Windows program that they provide. Unfortunately, this requires a BT enabled desktop or laptop PC. Very unpractical indeed!
Therefore, I developed this small utility to reset GPS receivers. It should work on any device with .NET Compact Framework installed and for any BT serial port GPS receiver.
Installation:
1 - extract the files from GPSReset.zip
2 - copy GPSReset.cab to your device
3 - run it, a shortcut to GPSReset.exe should appear inside Programs
or
2 - copy GPSReset.exe and OpenNETCF.dll wherever you want in your device (but not \Windows)
3 - create a shortcut to GPSReset.exe
Usage:
1 - check that BT is enabled and that the GPS receiver is on
2 - run GPSReset
3 - select the serial port and and the baudrate of your GPS receiver
4 - click the Open button and wait for the Reset button to become enabled (or for an error message)
5 - click the Reset button
6 - click the Exit button, that's it
After reset it might be necessary to execute again the BT pairing procedure with the receiver.
Click to expand...
Click to collapse

boot apdate gps
guadafra said:
L'ho provato sul mio Mypal 632n
Click to expand...
Click to collapse
I would like to know how to update firmware gps .
tem algum programa

[UTIL][GPS]MBeGPS

It is available now a software upgrade.
It is possible time to send our position both street SMS that by email.
With the SMS we can send our current position in the form of Latitude and Longitude in formed decimal Degrees that can be used on google Maps/Earth.
With the email is sent a message that will allow instead to whom receives it to be able to visualize a map with our exact position.
In practice for who receives the message it will be enough tap above to send the necessary script to Google to get the map.
To access these two functions click on the menu Stato, Invia Posizione and chose between Invia SMS or Invia mail
Shortly it will be possible to use the incoming SMS to visualize the position of whom has sent it in comparison to ours with the distance and to asked for the visualization on a map.
It is necessary to have a configured account on the device
David
I renamed my software: now it's MBeGPS instead of VisualGPS (in order to don't create homonym)
Hi everybody, I wrote this software to have under control all the functionalities of the integrated GPS or external one.
Besides is possible to visualize the own position as Google Maps and can be possible memorized some itineraries by to see on Google Earth.
It is possible download it here:
www.mbenterprise.it/Software/tabid/54/Default.aspx
David

I can translate the instructions page in Google, but is the software available in English?

I think you should choose another name for it.
Another program i allready called Visual GPS:
http://www.visualgps.net/

@timn2087
now is present the english version of the user manual on site, I'm working to release a new version in english in a few days.
@teddyen66
unfortunately I have discovered the other visualgps to late, consider that in italy the number of download is more that 1.000 and I would create confusion if I now changed the name.

but maybe it might become not only a confusion but a copyright issue. I don't know....

timn2087 said:
but maybe it might become not only a confusion but a copyright issue. I don't know....
Click to expand...
Click to collapse
Yeah, that was the reason I wrote it.

I renamed my software: now it's MBeGPS instead of VisualGPS (in order to don't create homonym)
David

non mi memorizza l'itinerario.Compare un messaggio d'errore dicendomi di installare cfnet3.5, anche se gia e' installato.

it would be nice if it's also in english on that website of yours

Now there is the complete english translation of the user manual.
after the registration it is reachable on a new page named MBeGPS

is this software in english so i can try it?
thanks

I'm working to translate the software too.

MbeGPS 2.1 is available now
It is available the new version of MBeGPS in two different version, Std for all devices without accelerometer sensor and Plus for the device with sensor.
In the next week I'll traslate the software in English (I would like wait for the first feedback in order to clear the software from the bugs before traslate).
David

Latest software version is now available
I have highlight the description obove the upgrade on the first post
David

can someone please explain in plain english what this program does?

You can take under control all the GPS information like a Latitude and Longitude, Compass, Altimeter, Speed (Km/h) or changing view, you can see your route with the possibility to save it and pass the file (.kml) to google earth in order to highlight it over the satellite map or send the current position via gprs or wifi to google maps in order to obtain a map with your actual position on a street map or send by mail your position in order to make to know your position to anothe person.
You could also reload your route (graphics not over the map) and strike it again (bike or trekking route etc.)
You can see in a third view your acceleration like a Formula 1 graphic style and your inclination roll and pitch.
David

why don't you add screenshots? (to your site)
(I see you have AFTER someone registers!...)
also WHICH files to download?
you have most of the site in italian - it is not clear

After registration you can have the access ho mbegps page.
Tou can choose from mbegps std v.2.1.0.2 for device without accelermeter sensor ore mbegps plus v.2.1.0.2 tor device with the sensor.
There is an english version of the user manual about the v.2.1
The upgrated command are described also in english in the news section or the home page

yes but the PROGRAM is not in English

Now is available the english translation of the program plus a little upgrade.
In the graphics window , touching the speed rectanle, the speed units toggle from Km/h to Knot and to miles.
This values will be saved into a MBeConfig.ini file and will be reload at the software startup.
I have decelerate the gsensor acquisition.
In knot mode the pointing on the center screen are disabled and the zoom is increased to permit more details during the boat navigation.
Please let me know every problem you have
Thanks
David

it's not 3.2 mega pixel !!!!!

first, sorry for my bad english
I do not understand if it is a defect in my X1 or is general, however, the camera is slow to capture the image, the photos are often moved, the flash is weak and it's look down compared to what the camera sees. Finally, when you select on display 3 mega pixel, the photos are made in 1280 x 2048, not 3.2 mega pixels.
also happens to you?
(by google translate)
non capisco se è un difetto del mio X1 o è generale, comunque la fotocamera è lenta nel catturare l'immagine, le foto vengono spesso mosse, il flash è debole e punta troppo in basso rispetto a ciò che inquadra la fotocamera. infine quando sul display si seleziona 3 mega pixel le foto vengono fatte in 1280 x 2048, che non sono 3.2 mega pixel.
succende anche a voi?

First of all, this is a phone (wait...not its not, its an PDA), not an camera.
Secondly, looks like you have 'widescreen' enabled which uses a wider aspect ratio, cutting some pixels on the top and bottom.

it use finger push focus thats your fist problem if you dont want to use finger push focus you can just turn it off in the settings
secondly then i guess you're right 3.2 is 2048 × 1536 = 3,145,728

You can also speed up the shutter speed by switching to the Sport mode setting.

thanks for the answers, you have been very rapid.
I'm not thought that in widescreen many pixel are cut ... All resolved

Teyes Voice Activation and SPRO to CC2 Firmware Upgrade

So it appears that if you have SPRO firmware you need to pay to upgrade to CC2. Like to do it for free.
Also voice activation is not free. I noticed on 4pda that it looks like it is doable, however the translation is poor and it's hard to confirm. Anyone has success?
https://4pda.ru/forum/index.php?showtopic=936715

Like to do it for free.
Click to expand...
Click to collapse
It is possible for the old firmware only. Or install SPRO firmware with the deactivated CC2 applications.
Anyone has success?
Click to expand...
Click to collapse
No one.

Thanks, same launcher as CC2?

wooldogsinc said:
Thanks, same launcher as CC2?
Click to expand...
Click to collapse
Yes, the following firmware has both CC2 launchers. And the root access, changing launcher application, a radio with station logos and NoKill mod of ms.apk also. Check this: 4pda[dot]ru/forum/index.php?showtopic=936715&view=findpost&p=92203136

KёniG said:
Yes, the following firmware has both CC2 launchers. And the root access, changing launcher application, a radio with station logos and NoKill mod of ms.apk also. Check this: 4pda[dot]ru/forum/index.php?showtopic=936715&view=findpost&p=92203136
Click to expand...
Click to collapse
Looks like someone has done it. Able to install CC2 firmware on SPro without activation

Check the latest CC2 version 4pda[dot]ru/forum/index.php?showtopic=936715&view=findpost&p=95267151

Has anyone gone and done the transition to CC2. Even through payment?

yuhenyo said:
Has anyone gone and done the transition to CC2. Even through payment?
Click to expand...
Click to collapse
Yes I have without payment.

wooldogsinc said:
Yes I have without payment.
Click to expand...
Click to collapse
How? What instructions did you follow?

1. Prepare a blank USB
2. Find out if you have a g32 or g23
3. Download the firmware
4. Place it on usb, unzip place on / of drive
5. Delete the files in this post
6. When insert the usb upgrade should begin
https://4pda.ru/forum/index.php?showtopic=964473&st=2760#entry95248910

@KёniG can you explain in English what the NoKill mod and other mods are. Tried to understand but it's a bit hard to with the 4pda translation. Thanks

wooldogsinc said:
@KёniG can you explain in English what the NoKill mod and other mods are. Tried to understand but it's a bit hard to with the 4pda translation. Thanks
Click to expand...
Click to collapse
NoKill prevents killing processes after the head unit goes to sleep. When it wakes up applications still work. Which other mods you are interested in?

yuhenyo said:
Has anyone gone and done the transition to CC2. Even through payment?
Click to expand...
Click to collapse
KёniG said:
NoKill prevents killing processes after the head unit goes to sleep. When it wakes up applications still work. Which other mods you are interested in?
Click to expand...
Click to collapse
Oh yeah. That would be awesome. Will be installing that one.
I think the dialer is the only one, it just pops up when there is a call hey?

wooldogsinc said:
it just pops up when there is a call hey?
Click to expand...
Click to collapse
Call window pops in a small window in the bottom (not in the full screen) in the described applications.
Please refer the following video for greater details:

Hi there everybody! I have aqquired a CC2-SPRO head unit recently and, despite i have inserted a cell phone chip in it, i am having troubles to use it to make phone calls regardless the bluetooth. The call is completed but the sound does not get the speakers! Please, show me how to overcome this issue! Tks...

Do you think this would be the same process with the SPRO+? I assume this is just updated hardware? Also any able to upgrade to the CC3 software?

lrietz said:
Do you think this would be the same process with the SPRO+? I assume this is just updated hardware? Also any able to upgrade to the CC3 software?
Click to expand...
Click to collapse
Possible from CC2 plus but looks more trouble than its worth at moment.
Some features will work, some won't.
Trippy intro is cool, very futuristic space theme. - I'd like to hear it in English & oral rundown of the CC3.
I translated 'it works but has a few troubles' Good thing if it doesn't work to your liking, it's possible to do a kind of flash reset, returned to the original CC2 plus.
Good luck whatever you decide.

Hello there !
I got a cc2plus and desperatly looking for some help ...
1 - odb
I bought odb adapter with the unit from teyes too, the odb adapter seems to work because I can see it on my phone and can pair with it using 1234 as pair code
But when I start the OBDII app on the teyes cc2plus, it just says "no device binding". I think it does not find the obd adapter...
2 - bluetooth music
The bluetooth music player app does not allow me to control music on the home, there is no widget. All the widgets control localy stored music, no bluetooth music
3 - android auto
I tried everything, upgrading android auto on cc2plus, setup android auto on my phone, on my wife phone, I tried every different usb port, nothing works.
The android auto does not recognize cc2plus when I plug usb cable.
4 FM Tuner RDS
FM tuner does not show RDS names, only frequencies numbers. Really annoying.
5 ok google
don't know how to make it work ... I have a mic icon on upper top right, but when I click on it, nothing happens.
When I use the visual keyboard, I press the microphone button, nothing happens either.
I am, at the moment, extremly disappointed about this unit, all I wanted was :
bluetooth music play : works but not handy at all
android auto : dont work
ok google : dont work
odb car diagnostic : dont work
Only google maps works but I have to share my phone data using wifi sharing, which is battery intensive. If I could make android auto works, that wouldn't be needed.
I hope someone can help me there

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
You prob have it all sorted out but if you're still a bit stuck i may be able to point you in right direction.
Did you download 'HeadUnit Reloaded' from Google play to open Android Auto on the device and choose wired USB from the options on uploaded image? The Trial is a bit buggy,
(I wonder why? ) but it Definitely works if you want to buy the paid version.
Set Wireless Projection to 'On' on phone settings and there are detailed videos on Youtube on 'JansenVlog' YT Channel with all the information re: Android Auto.
You open the AD2P Blutooth music app and pair your phone so that even music metadata shows Artist, Album & song info on device display.
Google assistant should be ok too as long as your phone is synched.
Good Luck.
EDIT:
My Bluetooth Music streaming incl metadata
(sorry sun was shining right on screen but its readable at least)
I dont know if you can, or would want to change this particular U.I. ?
Also regards voice control, the English T'eyes Voice app looks well up to the task.
If you review your device on whichever website you purchased it from & upload 5 photos, get in touch with seller and see if it can be activated for your troubles.

tamere22 said:
Hello there !
I got a cc2plus and desperatly looking for some help ...
1 - odb
I bought odb adapter with the unit from teyes too, the odb adapter seems to work because I can see it on my phone and can pair with it using 1234 as pair code
But when I start the OBDII app on the teyes cc2plus, it just says "no device binding". I think it does not find the obd adapter...
2 - bluetooth music
The bluetooth music player app does not allow me to control music on the home, there is no widget. All the widgets control localy stored music, no bluetooth music
3 - android auto
I tried everything, upgrading android auto on cc2plus, setup android auto on my phone, on my wife phone, I tried every different usb port, nothing works.
The android auto does not recognize cc2plus when I plug usb cable.
4 FM Tuner RDS
FM tuner does not show RDS names, only frequencies numbers. Really annoying.
5 ok google
don't know how to make it work ... I have a mic icon on upper top right, but when I click on it, nothing happens.
When I use the visual keyboard, I press the microphone button, nothing happens either.
I am, at the moment, extremly disappointed about this unit, all I wanted was :
bluetooth music play : works but not handy at all
android auto : dont work
ok google : dont work
odb car diagnostic : dont work
Only google maps works but I have to share my phone data using wifi sharing, which is battery intensive. If I could make android auto works, that wouldn't be needed.
I hope someone can help me there
Click to expand...
Click to collapse
1. I got my ODB working after several tries. I had to go to Bluetooth config first to set it up and press an icon to connect it. Then you have to wait some time for the app to properly work. Sometimes I needed to reload the radio.
2. I highly recommend you to use some other launcher like Nova Launcher. Then you will have plenty of customizations available and widgets.
3. Try 'HeadUnit Reloaded' but I tried it and didn't like Android Auto in general. I use a lot of different apps directly in the radio with no problem, like Vanced Youtube (no adds), AIMP, Prime Video, Google Maps, etc.
4. In my case, when I select the radio station it fills in the name. I'm in Spain.
5. I installed "Google Assistant" and I can launch it by one icon in my launcher, but also I've managed to set a steering wheel button to launch it using https://github.com/hvdwolf/FytHWOneKey
Some other apps I recommend you to try:
Twilight
Overlays - Floating Apps Launcher
better Radio : https://forum.xda-developers.com/an...its/dev-navradio-app-allwinner-units-t4024701
Basically the FYT-Starter apk contains both the Setup entry point and the default one that is used to automatically start the apps at ACC_ON.
If your launcher shows only 1 entry in the app list, you can install the second apk (FYTStarterSetup) which starts the setup screen directly
Attached Files
FYT-Starter_1.01.1907081605.apk - [Click for QR Code] (199.7 KB, 396 views)
FYTStarterSetup.apk - [Click for QR Code] (15.1 KB, 320 views)
Emulator Android Auto:
https://forum.xda-developers.com/ge...ndroid-4-1-headunit-reloaded-android-t3432348
https://forum.xda-developers.com/an...ad-units/teyes-cc2-headunit-reloaded-t4111035
Some other links (some translations from Russian to Spanish, sorry)
Nokill.apk y Automatización con Macrodroid para tener a la vez el navegador, el anti-radares, etc.
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=es
Auto Brightess , brillo de la pantalla por
control de volumen de la aplicación GPS
Fix TTL (distribución de la radio)
ˇModificaciones de com.syu.ms.apk (NoKill / detectores de radar / marcador)
ˇFYTStarter (ejecución automática)
DVR SynCarKit_TZY_20190424.apk (Teyes)
ˇSpeech (Teyes) ¡ Funciona solo con firmware CC2 / SPRO no antes del 29/07/2019!
ˇAplicación de configuración del sistema (Omega_kz)
Medir la temperatura de la CPU
MOD: Aplicación de inicio para el firmware CC2 28/11/2019
ˇColección de software de la unidad principal
ˇMusicProxy (reemplazo del reproductor normal por otros de terceros)
Modificación de la aplicación Archivos / Reproductor / Cámara
Conexión a PC
ˇEntrenamiento de las teclas del volante para la función Atrás
ˇProcesos iniciados después de despertar
ˇEjecución de scripts después de flashear con derechos de administrador
ˇDesactivar la verificación de licencia de la aplicación
ˇCómo modificar boot.img (ejecución automática, root)
ˇInstrucciones para editar aplicaciones del sistema
ˇCómo evitar la finalización de los procesos y aplicaciones necesarios cuando la GU entra en suspensión
ˇDescripción de volver a empaquetar el archivo con aplicaciones Allapp.pkg, con datos cambiantes de la aplicación