Basically, I Installed A Theme, Was A Bit Too Small So I Went To Change It To The Previous Theme Using Diamond TF3D Config, It Crashed Half Way Through, I Turned The Touch HD Off And On And Now It Just Keep's Saying 'Tap Here To Launch TF3D' I Reinstalled The TF3D Config And It Still Won't Run And An Unexpected Error Keep's Occuring.
Someone Help Pleasee
Solution
On the device, go to the windows folder on your device with your favorite file explorer (total commander) and delete ALL files with the .manilla extension.
Then reboot the device, you will have your original theme back, and you can start over.
.manilla or _manilla?
Related
My MDA Vario keeps giving me a cprog.exe error when entering the dialing screen.
any ideas?
What mods have you done to your phone? In particular have you installed a new dialer. Cprog.exe error as far as i am aware is a security policy error where you have incompatible software. Remove any software that may be causing this, but often you have to resort to a hard reset.
I did have the same error yesterday on my HTC Touch HD. The error started after installing HD tweak (version 0.5.4). I removed this tool and till now.... no error (fingers crossed).
Hopes this experience helps somebody in the future.
btw)) the HTC touch HD in a nice toy
Hi guys,
id have it too today because of replace the pim.vol file (contacts, calender ...)
i restore the file and its ok now
sup
i had like 8 errors today :S i haven't installed any program in past 14 days...i had just exchange server & that's all. is it possible that cprog.exe error appears coz of my last install of PHM reg edit program? (arroudn 14 days ago)
I found the solution.
Go to file explorer in the device cut and copy your 'pim'file into my document or delete it.then soft reset your phone. Another pim will be created automatically ,which will be blank one.you might lose your contacts and dial history.Back up your contacts before using this.After soft reset this will solve the problem
I have same problem , but I can't delete the pim file
jsaid said:
I have same problem , but I can't delete the pim file
Click to expand...
Click to collapse
use Total Commander to delete them
I fixed my HTC HD2 by this method. I was unable to delete the pim file, so I moved it to 'my documents' folder. Then I did a soft reset. Lo and behold a new pim file appeared where it belonged. I was now able to delete the old pim file from 'my documents' folder. Wham..the device worked like a charm again. Fast running on all apps and no 'cprog.exe' error messages or locking up. Thanks heaps.
Dear all,
i installed windows mobile 6 on my wizard (Crossbow) and it is working fine.
Suddenly all programs in .cab extension do not install, i press the file and nothing happens. I applied a registry tweak before this happened that keeps .cab after installation as not to delete them. when i applied the first tweak it didn't work so i restored it back and applied the second tweak and it worked fine, any suugestions?
Also when i installed windows mobile 6 i can not find an account for MMS messages, why is that ?
Thanks
Ok, had HTC enlarge start menu installed and it worked fine, but figured let me try the Blackstone Start Menu (think you get a page with the icons instead of a list?) but I didn't uninstall first...after installation was told to reboot, but I still had the HTC enlarge list (although it had gone a dark grey and was hard to read)...so uninstalled that. Now back to the regular start menu, so uninstalled and reinstalled Blackstone Start Menu...no change. Uninstalled the Blackstone one and reinstalled HTC enlarge, but now I am stuck with the small menu...any ideas please of the registry entry or file I need to manually get rid of to get this to work properly again?
1-what is ROM ?
2-if it put tf3d rom or another it will delete all files in the system ( like hard reset ) ?
3-is tf3d is like a panel ( spb mobile shell ) or will delete windows mobile system?
4-what is GeoTagging in camera ?
thanks
From what ive gathered by using roms my self... i have found the following:
1. What is a rom?
it is basically the thing that make the user interface look the way it looks. The default windows today panel is the default rom which the phone comes with. TF3D rom will replace that and make it look like a HTC Touch HD. you can install it as a panel by following this link-
http://forum.xda-developers.com/showthread.php?t=441439&highlight=tf3d+panel
Download TouchFlo3D on Xperia X1 cab and TouchFlo3D as Panel Installer Installer.
Install TF3d first, softreset, then go to settings, today, items and untick every thing. then soft reset.
Now install TF3d panel installer. soft reset. then just choose the panelas younormally would.
2. A rom will edit certain windows files to make it look and behave in a different way, but it would still be the windows interface. if you install another rom, it will erase all files on phone. and replace certain windows files.
3. see q 1
4. Dont know what geo tagging is??
thanks alot
but when i install the tochflo 3d beta 3 and made everything then when i press on the panel it writes to me loading in a white screen and notheing occure ??
Ok here is my issue I have built a totally fully custom theme for a client on a Touch HD running duttys v3 Xtream rom and it works flawlessly on it.
Now the problem....
I got my hands on a real TP2 Rhodium and loaded my theme and guess what many issues. the theme files are slightly different in a few areas such as The people tab needs to be fully reworked again and the albums tab has a few small issues.
The 2 major issues I need someones help with is...
1. The stupid purple home screen wallpaper that loads itself over the default one.. there does not seem to be default option that pops up on the Touch Pro2. I modified the manila files to show the proper backgrounds on Port and Landscape mode and they show properly and in HQ but that dam home screen keeps overwriting with that purple wall. I'm thinking this issue would be hidden in the mode9 files or the home.xml files does anyone have any knowledge on this that would benefit me?
2. Patch manila files to be cfc ready on the Touch Pro2 I attempted to patch the files usen chainfire methods and I'm not able to do it on device it fails and will not overwrite the manila.exe file I tried loading the modified patched files manually from my pc to device but keep getting a unable to modify files due to microsoft signing issues. I attempted to use the reshacker resign tool get a confimed resign message but still can't upload to the device. [I can work around this issue but would rather fix it]
I have a deadline for this project that is only just about a week away now and normally I would just find it myself but if there is someone much smarter out there that may already have these answers I would really appreciate the help.
I am aware this question may pose a issue to the forum rules but figured altho this does not offer immediate usefulness to the smartphone community It will benefit us all in the near future. If it has pushed the envelope of the forum rules I will say my "I'm Sorry's" in advance to the admins and mods here.
First, how are you trying to overwrite? From the PC to the ppc? If so, use resco explorer or total commander. Also, use a good task manager like SK Tools has or dotFred & make sure manila is not running, along with tdserver, manila2, etc... All the executables may need to be stopped b'c of dependencies.
BTW, coke is bad, very bad.
I have attempted to use the cfc program of chainfires to patch to device it succesfully patchs the files but it says fail when trying to save them. I also patched the manila files with the same tool to the extraced manila files on my pc the patch will succeed on the pc. I then moved the files to the ppc and moved them [with total commander] to the windows folder. fail to over write [with TF3D shut off in the settings yes] I attempted to load the patched theme from a .cab file [ driver signing issue ... fail ] I can load all the uncompressed files with no issue but would much rather cfc compress the theme due to the size issues of a complex theme like this one. I skined the enitre interface all internal TF3d interfaces as well as the main TF3D interface. For the HD the same files are 8mb but the uncompressed version I have running on the TP2 are over 17mb to big for me I don't want to lag the device due to the graphics. It just seems there is a issue with overwritting the manila.exe and the 2 .dll files I thought of attempting to rename the .exe and .dll files with total commander as well but even if that worked its not practical as this theme must be able to be deployed in a single .cab file.
I am a theme designer and really have very limited knowleage of the code side of manila so I am really hopeing someone that understands the mode9 .exes and .dlls in manila could help find the answers to this for me and ... everyone as I may be the first to ask this but I won't be the last for sure... lol
Why not create a cab instead of trying to overwrite manually?
PROBEX said:
[with TF3D shut off in the settings yes] I attempted to load the patched theme from a .cab file [ driver signing issue ... fail ]
Click to expand...
Click to collapse
I did that it failed due to new driver signing issues, if you have not used the new touch pro 2 it has some new security measures I think as I had troubles installing normal programs before installing the sdkcerts.cab now those programs install alright.
but still this home page wallpaper overwriting and no cfc support is driving me crazy
But keep the ideas coming guys we are sure to stumble upon it sooner or later.
Thanks for the responses
PROBEX said:
I did that it failed due to new driver signing issues, if you have not used the new touch pro 2 it has some new security measures I think as I had troubles installing normal programs before installing the sdkcerts.cab now those programs install alright.
but still this home page wallpaper overwriting and no cfc support is driving me crazy
But keep the ideas coming guys we are sure to stumble upon it sooner or later.
Thanks for the responses
Click to expand...
Click to collapse
You shouldn't use CFC. Since it's a stock rom, it's unlikely to be CFC compressed.
I thought I could patch the manila and deploy the patched cfc version with the .cab , Chainfire gave me a few Ideas to try and I will update this thread if I get anything firgured out with that.
Still looking for a solution on the home page wallpaper being overwritten.
So let me know if anyone finds a solution for that one.
Does anyone know how to disable the file protection on the Rhodium I can't seem to change any of the core OS files any exe or dll renameing or deletion fails. I tried using total comander and changing the file properties so they were not read only but the changes will not stick?
I also attempted to use the newest cfc ui tool to patch manila on device and it failed agian, but if I could manage to change the name and delete the manila.exe and mode9.dll files as Chainfire recomended I may be able to patch them.
Agian any Idea's are really welcome as I'm losing my mind over here trying to get this to work... lol