My MDA Vario keeps giving me a cprog.exe error when entering the dialing screen.
any ideas?
What mods have you done to your phone? In particular have you installed a new dialer. Cprog.exe error as far as i am aware is a security policy error where you have incompatible software. Remove any software that may be causing this, but often you have to resort to a hard reset.
I did have the same error yesterday on my HTC Touch HD. The error started after installing HD tweak (version 0.5.4). I removed this tool and till now.... no error (fingers crossed).
Hopes this experience helps somebody in the future.
btw)) the HTC touch HD in a nice toy
Hi guys,
id have it too today because of replace the pim.vol file (contacts, calender ...)
i restore the file and its ok now
sup
i had like 8 errors today :S i haven't installed any program in past 14 days...i had just exchange server & that's all. is it possible that cprog.exe error appears coz of my last install of PHM reg edit program? (arroudn 14 days ago)
I found the solution.
Go to file explorer in the device cut and copy your 'pim'file into my document or delete it.then soft reset your phone. Another pim will be created automatically ,which will be blank one.you might lose your contacts and dial history.Back up your contacts before using this.After soft reset this will solve the problem
I have same problem , but I can't delete the pim file
jsaid said:
I have same problem , but I can't delete the pim file
Click to expand...
Click to collapse
use Total Commander to delete them
I fixed my HTC HD2 by this method. I was unable to delete the pim file, so I moved it to 'my documents' folder. Then I did a soft reset. Lo and behold a new pim file appeared where it belonged. I was now able to delete the old pim file from 'my documents' folder. Wham..the device worked like a charm again. Fast running on all apps and no 'cprog.exe' error messages or locking up. Thanks heaps.
Related
hi,
i'm having an odd problem. i am unable to do many things
1) sync with activesync. i can explore and transfer files to and from the device, but only as a guest, i cannot truly sync.
2) remove programs - the list is empty and i cannot remove anything
3) nothing new will install. when i send a cab over, and i try to install it, it will tell me that the installation was unsuccessful.
i belive this all started when an installation over activesync (tomtom) failed, though i am not sure.
i have rebooted my computer, uninstalled and reinstalled activesync, soft-resetted my 8125, tried serial/rndis. nothing seems to work.
the pda is usable right now, from what i can tell. the programs that are already on there work fine. its syncing that is all messed up.
thanks for any help you can give.
and i have managed to fix it, in a fashion
1) make a full backup (except for the sd card) with sprite backup. (i made this backup while i was having these problems)
2) hard reset, let ext rom run
3) restore from backup
everything seems to work, so i can say that i'm happy with it
norelidd, I had your exact same problem last night. Active sync was uploading a CAB file onto the device and I pressed cancelled. No big deal I thought because it cancelled during the uploading process. When I tried to sync it later, nothing worked except for the "explore" files option. I wasn't able to sync, remove, install or even change my today theme. The device itself still functioned normally, made calls normally and got on Cingular's EDGE fine. Just wouldn't sync or install/remove or change the today theme.
I performed several soft resets, deleted any files files on the device created within the last hour of my previous sync incase anything was corrupted, nothing worked. Only solution, I finally bit the bullet and did a hard reset. :x Reinstalled everything and it works fine after the hard reset. :wink:
my mini s wont install cab files from the file explorer. you see, ive recently been admitted to hospital (dislocated hip from a rugby tackle, 4 weeks on traction ) and thought i'd download some games to play. but ive tryed downloading loads of different cab files, as obviously i dont have access to my pc, but when i click on them, nothing happens. any ideas??
This has happened to me twice
I am having the same problem. I thought it was an activesync problem but the first time it happened I was installing .cab files and there was a problem with the install. I had to fix the problem with a hard reset.
My problem now is that I just loaded a whole bunch of programs and I was looking for a good back up program but I do NOT have one on my 8125 yet. How can I back up my programs (or can I) if I must do a hard reset. Is there any way of fixing this problem without doing a hard reset?
Please help!
Thanks.
Still looking for help...
I am really trying to avoid a hard reset. Can anyone help us with this problem? I am thinking it may have been caused by installing programs designed for PPC 2003 and not WM5. But who really knows with microsoft.
Thanks!
Hi!
I'm having the same problem!
The thing is, I CAN'T make a hard reset because I don't have Sprite Bckup installed on PDA and I simply can't installit now! I don't have backup of my PIM data...
Can you help me???
Thanks,
Deiota
Deiota said:
Hi!
I'm having the same problem!
The thing is, I CAN'T make a hard reset because I don't have Sprite Bckup installed on PDA and I simply can't installit now! I don't have backup of my PIM data...
Can you help me???
Thanks,
Deiota
Click to expand...
Click to collapse
Hi again!
Just did the hard reset, but I found out a way to backup my PIM data.
Just copied the PIM.vol file that is on the root of the PDA and then, after the hard reset, restored the file. Done!
Best regards,
Deiota
I'll try it - thanks!
I did the hard reset and everything (except syncing through the exchange server is working). I will copy the file over. I am going to install the backup program first. It seems that my problems came from installing third party programs to the minisd card.
ARrrrrrrrrrrrr I have the same problem, canceled an install from activesync during the file upload...
I still don't see why this would cause an issue because the file had not started the install yet but obviously it has done somthing that I don't know how to fix... does any one know what the device does on a WM5 system when an app tries to get installed? is there a way to reset what ever it has changed?
Many thanks
JFC
This is the exact same problem, as I described here:
http://forum.xda-developers.com/viewtopic.php?t=57461
It is a problem with policies getting screwed up all by themselves.
I just had to do a hard reset and as I didn't have enough permissions neither a backup app, I've lost ALL my data.
I hope I won't have the same problem in the future.
Same problem for me last week. I obviously had to hard reset...
Same problem for me last week. I obviously had to hard reset...
Get yourself a registry editor and make sure that your Policies (on HKLM\Security\Policies\Policies\ ) are exactly like these:
http://forum.xda-developers.com/download.php?id=13422
This is probably the only thing that can prevent us from a hard reset.
I had the same problem on my HTC Mogul (Titan, Sprint PPC-6800).
1.) Before I started, I made a backup with SPB Backup, after I had my problems, but before importing a clean policies registry from another Mogul.
2.) I imported the file, but that didn't seem to help, so I thought maybe there might be some new policies that weren't there before, so I was going to rename the old policies tree, and then re-import the file. BAD IDEA. As soon as I renamed the tree, Windows Mobile kicked me out and required me to set a device password. It wouldn't run any applications or communicate with Activesync saying I didn't have enough permission. Nor could I re-run Resco Registry Editor.
3.) Someone else here said that he made a Sprite backup after the problems, did a hardware reset then restored, and it solved his problems. That didn't make sense to me, but I did have that newly created SPB Backup image, and my PDA at this point was pretty useless. So I hard reset and restored the image of my device and all the problems are now gone! I don't understand why, but I'm glad it's working.
Conclusion:
If I didn't have backup software already preloaded I would have been screwed, because when my PDA got initially messed up one of the symptoms was that I couldn't install any new applications. I should do backups more often, but the fact that it takes 20+ minutes makes it a unfun process.
Hello,
i have a file called History in the main device memory and it keeps going larger and larger every day! it seems like it is a log file for every time i soft reset my JasJar. i can't delete it or rename it and the only way to open it is to copy and paste in other folder and then i can open the copy.
can anyone advise how can i delete it or disable logging events?
Regards.
Internet Explorer history perhaps? You periodically need to clear the history cache from IE if you don't want your memory to fill up. I haven't found a way to put a limit on it. It just keeps growing till the whole friggin memory is full.
hi,
thanks for your reply but this is not the case! it is stand alone file which keeps recordings a log file of each time the device reset.
i had all kinds of i-mates before but this is the first time i see this file!
Hi,
I have raised this question many months ago. I had it on my old ROM and since upgrading to the latest Orange ROM i still have it.
The answer to my old post was that it was a debugging flag that was left enabled by the ROM - so far I have been unable to find it in the registry.
The only option might be to backup your device, hard reset and when you restore from the backup see if there is an option to ignore restoring the history.txt file.
Its very annoying and before I upgraded my ROM the file was at about 750K - now its at 55k, and thats within about 2 months.
Let me know if you find anything else about it.
Matt
Hi,
i have also tried to find it in the reg but no luck! so what backup software are you using?
many thanks.
ammar said:
Hi,
i have also tried to find it in the reg but no luck! so what backup software are you using?
many thanks.
Click to expand...
Click to collapse
I have only used Sprite Backup and this does now allow selective file restoration in the root directory.
Might be worth seeing if SPB backup will give the option to be more selective.
Matt
Hey guys,
today i received my P4350, i backed up my sms from my XDA-Neo with PPCimBackup and restored them onto the P4350...
But now i´ve got an unread mail in my sms folder, without any sender, message text or anything else. the receive time is always the actual time and i cant delete or move it.
has anyone of you an idea how to fix that?
I dont want to hardreset the device.
Greets Mäffjus
Additonal Info: It is running WM6 (by default).
Phantom SMS? Try to connect your device to desktop thru Jeyo Mobile Companion (trial version available at www.jeyo.com) and delete that SMS. Soft Reset.
its not working, ist shows now sms in inbox...i`m not sure why....
Maybe an error in the inbox database? can i edit the file via Hex or windows (XP) editor?
Further, do you know how i can disable the terrible sound when i sent an sms and the windows pops up? i found no entry in the registry.
hey, no further ideas?
easy as pie
just delete your sms/email inbox. It's the: " cemail.vol " In the mobile root directory. It'll be protected so you'll have to use a trick to get rid of it. Credit goes to Arkhipenko over at mobilitysite.com but here's a quick cut/paste of the solution.
"Hi,
I have recently discovered that my cemail.vol file went crazy: the outlook folders became misaligned.
Without much details of WHAT happened, I needed to delete cemail.vol.
It is not a simple thing since the file is constantly locked by some process (no idea which - I tried killing most of them via MemMaid to no success).
Anyway, to cut the long story short, one way to do it is to use...
Mortscript (what else!)
Create a simple script:
Delete "\cemail.vol"
Place a shortcut to this script to a \Windows\Startup folder and reset: you will have a brand new cemail.vol file when everything boots up (at least I did).
Don't forget to delete the shortcut, or you'll have a brand new cemail.vol every time you boot. "
Hi,
After a hard-reset I found wmwr_cprog.exe on my internal storage under programmes. Since I did a hard reset and thus thought this program wouldnt be installed anymore, I deleted the file, not knowing what it was for.
Now everytime I want to start my phone I get the message "The file 'wmwr-cprog' can't be opened. It isn't signed with a trusted certificate or one of the components can't be found. You might need to reinstall it or repair it if this problem keeps returning' (free translation from a dutch ROM).
What can I do and how can I do it. A quick answer is much appreciated since I cant make nor receive phonecalls and I am at work :-(.
Thanks in advance!!!
Solved
Posting the solution if someone else has or will have this prob in the future:
KB0808022: "The file 'wmwr_cprog' cannot be opened" error message after uninstalling WMWifiRouter
wmwr_cprog is an executable used to allow WMWifiRouter to work on devices that do not have actual voice capabilities, like the EM-ONE. Sometimes this application is not removed from the registry correctly when uninstalling WMWifiRouter, which can cause your phone to give you error messages.
To fix the error, you will need a registry editor, like PHM RegEdit (to use on your device itself) or MobileRegistryEditor (MRE) (to use on your computer and edit the registry over an ActiveSync connection).
Once you have launched your registry editor of choice, change the:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSCProg\1
entry from:
wmwr_cprog.exe
to:
cprog.exe
Close the registry editor, and wait two minutes - to make sure your device has saved the changes - and soft-reset your device. After the soft-reset, everything should be working as normal again.
Bartse said:
Posting the solution if someone else has or will have this prob in the future:
KB0808022: "The file 'wmwr_cprog' cannot be opened" error message after uninstalling WMWifiRouter
wmwr_cprog is an executable used to allow WMWifiRouter to work on devices that do not have actual voice capabilities, like the EM-ONE. Sometimes this application is not removed from the registry correctly when uninstalling WMWifiRouter, which can cause your phone to give you error messages.
To fix the error, you will need a registry editor, like PHM RegEdit (to use on your device itself) or MobileRegistryEditor (MRE) (to use on your computer and edit the registry over an ActiveSync connection).
Once you have launched your registry editor of choice, change the:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSCProg\1
entry from:
wmwr_cprog.exe
to:
cprog.exe
Close the registry editor, and wait two minutes - to make sure your device has saved the changes - and soft-reset your device. After the soft-reset, everything should be working as normal again.
Click to expand...
Click to collapse
thx problem too
Today I tried the SD install of ICS as described here: http://forum.xda-developers.com/showthread.php?t=1437463 Used brand new 16GB card, created \\ICS folder, copied contents of the 7Z file; In WinMo File Manager, opened CLRCAD, then HARET - after a green HTC logo, restart to WinMo, tried several times to no avail. OK, just a testing, can try later...
Then I changed the SD card, inserted my original card used with WinMo and restarted WM.
BIG PROBLEM - I'm getting error message whenever running a program now, error msg reads "The file 'some file' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Searched the forum, found this http://forum.xda-developers.com/showthread.php?t=392087. I have no reg editor installed, tried to install Total Commander but received "Installation ...was unsuccessfull".
What is the reason for this problem? How can I sort it out?
Thanks in advance
Have you an ActiveSync on your desktop PC? Try to use some registry editor that working via ActiveSync. For example "Remote Registry Editor", or look at that post. There is a link to such program.
Dr. Neuhaus said:
Have you an ActiveSync on your desktop PC? Try to use some registry editor that working via ActiveSync. For example "Remote Registry Editor", or look at that post. There is a link to such program.
Click to expand...
Click to collapse
Thanks. Downloadad/installed the CAregeditor on PC, opened registry of my HD2. I cannot change the value, getting "Write error-access denied/Cannot write value data". Any ideas?
Just 2 ideas:
1. "Connect to Device in CeRegEditor -> Tools -> Unlock Registry" (from this post). Or...
2. Hard-Reset
PS:
Some time ago I've used Android from SD, and got exactly the same thing... This caused me to reflash the ROM, but I've changed "0000101a" to "1" right after reflasing (this helped me to forget this problem).
Tried to unlock,still can't change the value. Also tried the other program recommended in the post but no - I cannot install it on HD2 - still the same problem :-(
Hard reset & ROM reflash probably the only way now, what a waste of time with reinstall/config of all the software/tools...
Anyway, thanks for your effort.