hi,
i'm having an odd problem. i am unable to do many things
1) sync with activesync. i can explore and transfer files to and from the device, but only as a guest, i cannot truly sync.
2) remove programs - the list is empty and i cannot remove anything
3) nothing new will install. when i send a cab over, and i try to install it, it will tell me that the installation was unsuccessful.
i belive this all started when an installation over activesync (tomtom) failed, though i am not sure.
i have rebooted my computer, uninstalled and reinstalled activesync, soft-resetted my 8125, tried serial/rndis. nothing seems to work.
the pda is usable right now, from what i can tell. the programs that are already on there work fine. its syncing that is all messed up.
thanks for any help you can give.
and i have managed to fix it, in a fashion
1) make a full backup (except for the sd card) with sprite backup. (i made this backup while i was having these problems)
2) hard reset, let ext rom run
3) restore from backup
everything seems to work, so i can say that i'm happy with it
norelidd, I had your exact same problem last night. Active sync was uploading a CAB file onto the device and I pressed cancelled. No big deal I thought because it cancelled during the uploading process. When I tried to sync it later, nothing worked except for the "explore" files option. I wasn't able to sync, remove, install or even change my today theme. The device itself still functioned normally, made calls normally and got on Cingular's EDGE fine. Just wouldn't sync or install/remove or change the today theme.
I performed several soft resets, deleted any files files on the device created within the last hour of my previous sync incase anything was corrupted, nothing worked. Only solution, I finally bit the bullet and did a hard reset. :x Reinstalled everything and it works fine after the hard reset. :wink:
my mini s wont install cab files from the file explorer. you see, ive recently been admitted to hospital (dislocated hip from a rugby tackle, 4 weeks on traction ) and thought i'd download some games to play. but ive tryed downloading loads of different cab files, as obviously i dont have access to my pc, but when i click on them, nothing happens. any ideas??
This has happened to me twice
I am having the same problem. I thought it was an activesync problem but the first time it happened I was installing .cab files and there was a problem with the install. I had to fix the problem with a hard reset.
My problem now is that I just loaded a whole bunch of programs and I was looking for a good back up program but I do NOT have one on my 8125 yet. How can I back up my programs (or can I) if I must do a hard reset. Is there any way of fixing this problem without doing a hard reset?
Please help!
Thanks.
Still looking for help...
I am really trying to avoid a hard reset. Can anyone help us with this problem? I am thinking it may have been caused by installing programs designed for PPC 2003 and not WM5. But who really knows with microsoft.
Thanks!
Hi!
I'm having the same problem!
The thing is, I CAN'T make a hard reset because I don't have Sprite Bckup installed on PDA and I simply can't installit now! I don't have backup of my PIM data...
Can you help me???
Thanks,
Deiota
Deiota said:
Hi!
I'm having the same problem!
The thing is, I CAN'T make a hard reset because I don't have Sprite Bckup installed on PDA and I simply can't installit now! I don't have backup of my PIM data...
Can you help me???
Thanks,
Deiota
Click to expand...
Click to collapse
Hi again!
Just did the hard reset, but I found out a way to backup my PIM data.
Just copied the PIM.vol file that is on the root of the PDA and then, after the hard reset, restored the file. Done!
Best regards,
Deiota
I'll try it - thanks!
I did the hard reset and everything (except syncing through the exchange server is working). I will copy the file over. I am going to install the backup program first. It seems that my problems came from installing third party programs to the minisd card.
ARrrrrrrrrrrrr I have the same problem, canceled an install from activesync during the file upload...
I still don't see why this would cause an issue because the file had not started the install yet but obviously it has done somthing that I don't know how to fix... does any one know what the device does on a WM5 system when an app tries to get installed? is there a way to reset what ever it has changed?
Many thanks
JFC
This is the exact same problem, as I described here:
http://forum.xda-developers.com/viewtopic.php?t=57461
It is a problem with policies getting screwed up all by themselves.
I just had to do a hard reset and as I didn't have enough permissions neither a backup app, I've lost ALL my data.
I hope I won't have the same problem in the future.
Same problem for me last week. I obviously had to hard reset...
Same problem for me last week. I obviously had to hard reset...
Get yourself a registry editor and make sure that your Policies (on HKLM\Security\Policies\Policies\ ) are exactly like these:
http://forum.xda-developers.com/download.php?id=13422
This is probably the only thing that can prevent us from a hard reset.
I had the same problem on my HTC Mogul (Titan, Sprint PPC-6800).
1.) Before I started, I made a backup with SPB Backup, after I had my problems, but before importing a clean policies registry from another Mogul.
2.) I imported the file, but that didn't seem to help, so I thought maybe there might be some new policies that weren't there before, so I was going to rename the old policies tree, and then re-import the file. BAD IDEA. As soon as I renamed the tree, Windows Mobile kicked me out and required me to set a device password. It wouldn't run any applications or communicate with Activesync saying I didn't have enough permission. Nor could I re-run Resco Registry Editor.
3.) Someone else here said that he made a Sprite backup after the problems, did a hardware reset then restored, and it solved his problems. That didn't make sense to me, but I did have that newly created SPB Backup image, and my PDA at this point was pretty useless. So I hard reset and restored the image of my device and all the problems are now gone! I don't understand why, but I'm glad it's working.
Conclusion:
If I didn't have backup software already preloaded I would have been screwed, because when my PDA got initially messed up one of the symptoms was that I couldn't install any new applications. I should do backups more often, but the fact that it takes 20+ minutes makes it a unfun process.
Related
As i tried switching my SIM with another one, to my surprise, i got a HARD RESET!!! Was that suppose to happen? I usually get a soft reset everytime i change SIM. What could have I done wrong?
Anyways, that's another issue. Fortunately, I backed up my data in my PC using ActiveSynch that day, however, unfortunately, as I was in the process of restoring it, I encountered errors. It says it cannot copy some files for they have been locked by some applications running in my PDA. I was so sure that no application was running then, I even soft reset it a few times just to be sure. Still it prompted for those errors. It includes my contacts, appointments, tasks, and some other databases. What could have been wrong in that scenario? Does it have any prerequisites before doing restoration? Coz it's now scaring me off even if i do backups everyday. It just doesn't restore everything. Please help on how I could prevent this kind of errors upon restoration. Thanks.
http://forum.xda-developers.com/viewtopic.php?t=12149
look like you are not alone in having issues restoring contacts and such
Most likely the hard-reset was caused by the fact that you did not put your phone in flight-mode before changing SIMs.
Happened to me once . . .
There is a thread on it . . .somewhere
edsub,
I don't switch my pda to flight mode everytime i change SIM and I usually don't encounter hard resets, only soft resets. This is the only time i did encounter it that's why i was wondering coz everything i did was just the same as before.
rudegar,
i was having problem on restoration of *.stg file coz it doesn't seem to restore everything. i encounter errors at the last part of restoration process wherein it warns me that some database files (including contacts and appointments) cannot be copied to my pda coz they are being held by some applications that are currently running. And im sure that there's no application running then, i even did some few soft resets prior to it, just to make sure.
yes i had that thing where it give those errors and dont restore contacts and appointmens and such but it does always restore applications and files for me
then when i have restored i just sync the xda with outlook and i once more have my contacts and appointments
Thanks rudegar,
So you're saying that we currently don't have any resolution for that, just a workaround? Actually, I'm now having my pda sync with our exchange server just to make sure if ever that darn thing comes out again. Thanks so much, il try to as microsoft about this.
Hi all,
got a QTEK S110, which is great. Recently done a backup, but when I then tried after a hard reset to restore, it could not, as it said it was for a different device!?!?!
Now I know this is not the case, so does anyone have any ideas what I can do.
I have also done a bit of messing about, and done different backups of my newly reset pda. This time it allows me to restore, but then stops and says some files could not be copied, because they could be in use, and to make sure all programs are shut. The only one open is Activesync, which I then shut And it says that it is all finished, but all my contacts along with other stuff has not been restored.
Activesync seems to be a bit lame. Is there another program I can use to restore the activesync backups?
Nick B
Hi Nick !
Had the same problem restoring with activesync. The backup i made was with country setting to "German - Austria" but the default after hard resetting the qtek is different so activesync quits restoring.
Solution:
After resetting your qtek set the country setting (Start/Settings/System/Country Settings) to the country you had set while you made the backup. The try the restore with activesync.
Good Luck,
Gerhard
Contacts & Calendar are somewhat problematic with backups. Next time use Sprite or another third-party product for backup/restore.
Now to solve the open programs try to boot in safemode. There are several programs to achieve this. I believe sbp pocket plus is one of them. Also you can try to empty the windows\startup folder. Just move the shortcuts somewhere else, especially poutlook.lnk is a suspicious one. I must say I never tried this myself when I had simular probs, at that time I didn't knew to much of the PPC.
Last resort try to synchronize with your desktop, this should give you the contacts & calendar data, which I think is most important at the moment. The other data will come from your AS backup.
Regards, M
Help is needed. I tried to install PocketStocks this morning. It would not install and now I can not install or delete anything from my 8125. I can run what is on it, but I can not add or remove anything. I have soft reset and tried multiple times to connect by USB but it will not sync. But it will let me "Explore" my hardware.
The Microsoft Active Sync troubleshooter is no help at all.
Any ideas?
jschaff said:
Help is needed. I tried to install PocketStocks this morning. It would not install and now I can not install or delete anything from my 8125. I can run what is on it, but I can not add or remove anything. I have soft reset and tried multiple times to connect by USB but it will not sync. But it will let me "Explore" my hardware.
The Microsoft Active Sync troubleshooter is no help at all.
Any ideas?
Click to expand...
Click to collapse
Hi i am familiar with pocketstocks but it looks like it buggered your device. What error message came up and how far into the install did it get? Just wondering are there any residual files to remove - check program files and windows\startup and registry if you are used to doing that. What error comes up when you try to install anything? You may need to backup important files and do a hard reset to solve this.
I had tried to install Pocket Financial Analyzer just before it, and that did not complete the install. So when I did the Pocket Stocks, it finished up by saying that PFA install was unsuccessful. I have had this happen before but a soft reset and reinstall usually made it work. I kind of do not think Pocket Stocks is the culprit.
I suspect that there is a corrupted system file, and maybe if I knew which one it was, I could delete it and a soft reset would rebuild the file.
Or like you said, I may have to do a hard reset and start all over. And that is OK. I have done this about five times before, but everything is working so good on the phone right now, that I hesitate to mess that up. I just can't add or delete any programs.
Its so weird, at first the name of my phone would not come up. Then I deleted Active Sync 4.1 and installed AS 4.2 beta. Now I can get the device name to show up, but still the list of installed programs does not show and I can't sync it.
Help is needed.
I had tried to install Pocket Financial Analyzer just before it, and that did not complete the install. So when I did the Pocket Stocks, it finished up by saying that PFA install was unsuccessful. I have had this happen before but a soft reset and reinstall usually made it work. I kind of do not think Pocket Stocks is the culprit.
I suspect that there is a corrupted system file, and maybe if I knew which one it was, I could delete it and a soft reset would rebuild the file.
Or like you said, I may have to do a hard reset and start all over. And that is OK. I have done this about five times before, but everything is working so good on the phone right now, that I hesitate to mess that up. I just can't add or delete any programs.
Its so weird, at first the name of my phone would not come up. Then I deleted Active Sync 4.1 and installed AS 4.2 beta. Now I can get the device name to show up, but still the list of installed programs does not show and I can't sync it.
Help is needed.
I agree there probably is a corrupt file somewhere - I would do all the checks I said and notification queue for good measure - but it looks like hard reset time. Recommend you invest in spb backup or sprite backup - then it all becomes so easy! Everybody that joins this forum should have to buy one - before entering the forum - lol!
I had SPB Backup trial. But everyone was saying that the ROM upgrades made the backup invalid since there were registry changes that may not correspond with the new registry.
So I did not use it again. I heard that SKTools has a backup built in. NO?
Which one is the best to use?
Thanks
I had SPB Backup trial. But everyone was saying that the ROM upgrades made the backup invalid since there were registry changes that may not correspond with the new registry.
So I did not use it again. I heard that SKTools has a backup built in. NO?
Which one is the best to use?
Thanks
Sktools has a limited backup, so its not that useful. Sprite backup is good as you can use it even with a rom upgrade and is now wm5 compatible.
This happened to me before and I ended up doing a hard reset, then it happened again but then that was due to a program needing a reset so after doing a soft reset for that it worked.
Now I have the 2.26 rom in and I have spent about a month and just installed a bunch of new apps today, nearing the end the same thing has happened to me. I tried a soft reset but it didn't fix the problem, I can't even go to the add/remove programs and remove the last few programs I had. It shows no programs to remove.
I don't know if installing it via .cab would work but these last few programs I'm trying to install are only in a .exe file, not a .cab file.
Then this is also interesting, I can't delete any 'system' files, I just tried to delete the default pictures from the main memory and I recieved
"Cannot delete picture_name: Access is denied
Make sure the disk is not full or write-protected and the file is currently not in use"
However I can delete the file through activesync on my computer.
There are about 16mbs of free storage.
I tried searching the forums but I couldn't find anything. I do believe this is a bug associated with WM5, does anybody have a workaround or fix?
I've only seen that a couple of times but a hrad reset was required. Curious on what software you're installing as this isn't really too common around here. Something's going rogue on you for sure, just what you're going to need to narrow down.
Sorry ...
Yes, I believe this problem comes about from an unsuccessful installation of a program, I had numerous unsuccessful installations so that is the probably the culprit. Oh well, I just did a hard reset, it's gonna be a looooong night.
Suddenly Activesync will no longer connect to my Universal
I hear the tone when I plug in the cable and AS displays connecting, however it fails to connect. Next I tried upgrading from 4.1 to 4.2 and this did not help. The only difference is AS will timeout and display a troubleshoot screen. Troubleshooting could not find anything. I rebooted my PC and Universal multiple time to try the classical fix without any success.
Any ideas what to try next?
howabout:
soft reset universal.
backup universal, and hard reset then restore.
delete partnership.
skywriter said:
howabout:
soft reset universal.
backup universal, and hard reset then restore.
delete partnership.
Click to expand...
Click to collapse
I was afraid that someone was going to suggest that That was on my list to try. First I want to check my home computer. A hard reset may be in order either way. For as long as I can remember, I can not get my Universal to uninstall a program. It always complains that uninstall did not work. I do soft resets before uninstalling. Therefore, I wind up manually deleting program files and shortcuts.
Does a hard reset clean up the registry?
How do I do a backup if I can't connect?
GaryK2 said:
Does a hard reset clean up the registry?
How do I do a backup if I can't connect?
Click to expand...
Click to collapse
a hard reset will return the registery to factory values and entries.
i use spb backup. you can get a .cab of the program. so you can put it on an SD card and backup to that (assuming you have one)
of course the restoring the backup will return the pda to the previous value state, but perhaps something will get lost that got it wedged in the first place.
to be honest, i have never found a cause for weird activesync behaviour or a repeatable work around often just 'doing stuff' fixs it.
skywriter said:
GaryK2 said:
Does a hard reset clean up the registry?
How do I do a backup if I can't connect?
Click to expand...
Click to collapse
a hard reset will return the registery to factory values and entries.
i use spb backup. you can get a .cab of the program. so you can put it on an SD card and backup to that (assuming you have one)
of course the restoring the backup will return the pda to the previous value state, but perhaps something will get lost that got it wedged in the first place.
to be honest, i have never found a cause for weird activesync behaviour or a repeatable work around often just 'doing stuff' fixs it.
Click to expand...
Click to collapse
This solved most of the problem. Thanks.
Wi-Fi config to work needs some tweaking - don't know why yet. However the #1 problem of active sync is now working.
I still can't remove a program via activesync or PPC. I mkust mannually delete files
GaryK2 said:
I still can't remove a program via activesync or PPC. I mkust mannually delete files
Click to expand...
Click to collapse
oh you remove packages with actisync? i never use that. i use the start->settings->system->remove programs. that removes stuff that's been installed with cabs, and activesync.