Related
There is no sound. I plugged in the head phones and i can hear out of that, but when i unplug it, i get no sound. It's like its still plugged in. Can anyone help me, or has anyone else experienced this?
sorry i have an o2 xda neo
Might be another instance of a known design issue with Prophet. Many people have hit this problem - mine did this and needed to be returned for repair.
Try putting the headphone jack in again and then out. Repeat like this for a while and your sound will come back on. If it doesn't, repeat faster.
This is a known issue where the sound disappears. Basically, a switch needs to be flipped for the prophet to know that the headset is out. Sometimes, this switch doesn't get flipped and the prophet thinks the headset is still connected, while actually its not.
If my solution sounds a bit crazy, it is...but its the only way and you don't need to send it in for repair. Search around and you'll find the same solution everywhere. People have also used a safety pin. But best is the headset jack itself.
How long mate? 2 hours? 3? I wish it had worked that way. I tried everything... still no sound. I think it is a crappy hardware. I think HTC should collect all prophets... I mean if it were a decent company.
Its just a little lower quality hardware, I agree.
If that doesn't work, try soft resetting. If that doesn't work, try hard resetting.
Its better to try all options before sending it in to the service centre, where it'll get screwed around and probably be kept for 2 weeks or something, due to "unavailability of parts"..
It is not working, removing and inserting again n again, some other method, i will have to try to open it, as it is not under waranty and it is also without bill, plz suggest me something
This seems to be a major problem with the HTC Prophet as a whole regardless of the branding. I have returned mine to Orange for a replacement, they confirmed that it was hardware failure. I thought that I might have just got unlucky with a bad batch, but looking across the NET and here, it appears that all brands based on the HTC Prophet are failing.
Obviously, shoddy manufacturing, I guess HTC did a little penny pinching with the speaker system.
I have same issue with my dopod 818 pro the plug and unplug trick did not work for me I have to send my to http://www.PocketPCTechs.com they have the device repaired for me now my device is back to business now..
I have the same problem here but i bit different... i was using an external speaker system, when i unplugged the jack from my spv m600 i did't get any sound the only sound i have is when i receive a call then i hear the ringtone but when i pick up i don't hear anything and probably the other side doesn't hear me...i tried to put the jack in and out but no results now i am obliged to use my phone with the headset...
same problem...solved!!
hi, today i had the same problem...no sound at all after i unplugged an external sound system. I plugged again the 2.5mm and unplugged it very fast a few times untill i got my sound back!!!
good luck
pixie
My m600 has been back to Orange for repairs for this problem. Works again perfect now.
Robin
PhoenixAG said:
Try putting the headphone jack in again and then out. Repeat like this for a while and your sound will come back on. If it doesn't, repeat faster.
This is a known issue where the sound disappears. Basically, a switch needs to be flipped for the prophet to know that the headset is out. Sometimes, this switch doesn't get flipped and the prophet thinks the headset is still connected, while actually its not.
If my solution sounds a bit crazy, it is...but its the only way and you don't need to send it in for repair. Search around and you'll find the same solution everywhere. People have also used a safety pin. But best is the headset jack itself.
Click to expand...
Click to collapse
I had the same problem today, googled, found this thread, followed your solution..... and it works fine again!
Thank you very much!
DrStein666 said:
I had the same problem today, googled, found this thread, followed your solution..... and it works fine again!
Thank you very much!
Click to expand...
Click to collapse
Does not always work.
It did not do the trick for me for sure. Orange had to repair it for me.
Robin
sound problem fixed by yourself
Hi all!
very easy! Just plug-in and plug-out hand-phone abit strong, it will get back!
lucky!
Thanks !
Worked for me !
Youpy
hi
i have a cingular 8525. i have no sound out of the loudspeaker and when i connect a USB headset i dont have sound either. i replaced the speaker thinking that it was that if anyone could please help me.
thanks
brandon
djstimpy said:
hi
i have a cingular 8525. i have no sound out of the loudspeaker and when i connect a USB headset i dont have sound either. i replaced the speaker thinking that it was that if anyone could please help me.
thanks
brandon
Click to expand...
Click to collapse
Welcome to XDA-Dev
Not enough info given.
Is there any sound at all out of wither speaker for any function whetjher it be phone / notifications etc etc.
Did you ever have any sound and if so when and how did it stop.
Have you done a HARD reset or not
Did you flash a new ROM / install a new programme and so on
Mike
i get sound out of the head speaker when calling but when i change over to loudspeaker it doesnt work. well i bought it used n it had this problem. i have done a load of hard resets and ive changed the rom so many times but nothing has yet worked.
djstimpy said:
i get sound out of the head speaker when calling but when i change over to loudspeaker it doesnt work. well i bought it used n it had this problem. i have done a load of hard resets and ive changed the rom so many times but nothing has yet worked.
Click to expand...
Click to collapse
Hi
Well I just looked at the board again (it's been a while). Unfortunately, in my view, it is not possible to work on the speaker circuit other than in very crude fashion. The board is multi layer and hence you cannot trace the connections easily, if at all without a diagram. Checking circuit integrity is virtuallty impossible without proper test equipment. Even repair shops won't bother - they will just get a new board. Another frustration is that it is very difficult to work on the circuit whilst it is switched on.
So after that ramble, I'm afraid if you have checked the new speaker and it's connector block then there's not much else you can do. It is possible that part of the circuit is blown, possible through a dodgy mini usb connection!
I would certainly believe it to be hardware if you've done hard resets and tried different ROMS. In fact any ROM should work.
Mike
i was afraid of that =( well i guess i got screwed on that part thanks for the info.
First of all Hi to the whole community by a new noob member.
I upgraded to WM6 thanx to you 2 weeks ago.
Now the problem :
My Tytn is mute.
No sound at all.
No ringing, no playing, no sound at all.
Can someone help me?
It worked fine till yesterday.
It has not been hitted.
I tried Soft and Hard reset, same problem.
It seems an hardware problem (I thought it was a SW problem before hard reset)
Olipro and WM6 Htc version (Italian) on board.
devilman said:
First of all Hi to the whole community by a new noob member.
I upgraded to WM6 thanx to you 2 weeks ago.
Now the problem :
My Tytn is mute.
No sound at all.
No ringing, no playing, no sound at all.
Can someone help me?
It worked fine till yesterday.
It has not been hitted.
I tried Soft and Hard reset, same problem.
It seems an hardware problem (I thought it was a SW problem before hard reset)
Olipro and WM6 Htc version (Italian) on board.
Click to expand...
Click to collapse
Do you get in-call sound?
Mike
no, no sound at all.
No ringing when i receive a call, no sound when playing back videos or songs, no music on games, no system sounds... MUTE
It seems something connected with the speakers, but the really strange thing is it worked till yesterday...
devilman said:
no, no sound at all.
No ringing when i receive a call, no sound when playing back videos or songs, no music on games, no system sounds... MUTE
It seems something connected with the speakers, but the really strange thing is it worked till yesterday...
Click to expand...
Click to collapse
What I'm trying to get at is, is it just the rear speaker or the front earpiece as well? The things you mention use the rear speaker. If you dial your Hermes from another phone and pick up can you hear sound through the earpiece speaker?
Mike
yes, it's only the rear speker.
The earspeaker works fine.
devilman said:
yes, it's only the rear speker.
The earspeaker works fine.
Click to expand...
Click to collapse
Ok. With luck it's just the push on connector for the speaker that's come loose. Not uncommon. If you are not worried about the warranty then see here:
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
first of all thanx a lot for tour help.
2 more questions :
1) the phone is 3 weeks old : do tou think the problem could be the one you mention with a new cell like mine?
2) The phone is under warranty (i dont have problems opening things ) Do you think it is better to bring it to an assistance centre or not?
devilman said:
first of all thanx a lot for tour help.
2 more questions :
1) the phone is 3 weeks old : do tou think the problem could be the one you mention with a new cell like mine?
2) The phone is under warranty (i dont have problems opening things ) Do you think it is better to bring it to an assistance centre or not?
Click to expand...
Click to collapse
If it's only 3 weeks old then I would certainly get it checked under warranty. IF it's the connector then it might not have been firmly pushed on from the start. If the speaker is blown then definitely go for warranty as the speaker is not easy to get a hold of.
So although it's an easy fix just remove the back and you see the connector, it is too much to risk your warranty if it turns out to be more serious! Only problem may be returning the ROM to an acceptable one before getting a repair.
Mike
yes, this could be a problem.
I hope they will not make objection for WM6 (it's the HTC official relaease) but i think i shiul reinstalla the old bootloader, am i wrong?
is it possible ? where do i find it here ?
I'd really like to make it by myself, the problem, i think, is that the little label "void" has to broken and with it the warranty, hasn't it?
Where can i find an How TO disassemble the Tytn?
Again, thank you very much.
Hi,
I bought New HTC Touch HD from UK and brought it to the middle east. i found out that i have NO SOUND at all from the speaker. No Ring on incoming call, no play of music or a video but i am able to talk and listen when making call.
Does any body guess what could be the problem?
jadihussain said:
Hi,
I bought New HTC Touch HD from UK and brought it to the middle east. i found out that i have NO SOUND at all from the speaker. No Ring on incoming call, no play of music or a video but i am able to talk and listen when making call.
Does any body guess what could be the problem?
Click to expand...
Click to collapse
Just make sure you have your system sound is up.
What ROM / Radio do you have?
...or perform a hard reset and at least you will hear the start up sound!
Hi,
Did Hard Rest. no sound on startup.
ROM 1.14.415.2 (32434) WWE
ROM 12/23/08
RADIO VER 1.10.25.25
PROTOCOL VER 52.57.25.30
This is information of the Device
i upgraded the rom. no luck
i installed hardspl and tried cooked rom, no luck
in last, i took it to the technician of PocketPcs. he opened it up and said come after an hour. i went and the mobile was working fine. he said he has changed the speaker. wow
thanks for help guys
had that on another HTC device.
It was broken, and constantly thought that a headset was plugged in.
so it disabled the speakers.
do you see a headphone icon in the bar at the top?
Try to change your radio, when a radio isn't compatible, the first thing you can see is that you havn't any sound
Icefeldt said:
had that on another HTC device.
It was broken, and constantly thought that a headset was plugged in.
so it disabled the speakers.
do you see a headphone icon in the bar at the top?
Click to expand...
Click to collapse
Wow, thanks for this. I just fixed mine as a result.
I was getting no sound from the phone and microphone was also not working in call.
In call sound/mic worked fine through bluetooth.
Sound did not work when previewing sounds however the phone did ring.
After reading 27 pages of the "No Sound in Call (Intermitant)" thread (http://forum.xda-developers.com/showthread.php?t=438457&highlight=sound), it turns out to be a simple fix.
It turned out to be a bent pin in the USB port. The phone must have thought that the headphones were plugged in. Thanks!
hamm3r said:
Wow, thanks for this. I just fixed mine as a result.
I was getting no sound from the phone and microphone was also not working in call.
In call sound/mic worked fine through bluetooth.
Sound did not work when previewing sounds however the phone did ring.
After reading 27 pages of the "No Sound in Call (Intermitant)" thread , it turns out to be a simple fix.
It turned out to be a bent pin in the USB port. The phone must have thought that the headphones were plugged in. Thanks!
Click to expand...
Click to collapse
Hey dude .. how did you fix it .. my HTC HD is having the same problem .. shows the headset icon on top all the time and no sound. it thinks that the headset is plugged in. HTC HD has a 3.5mm Jack and does not supports USB headsets. so wondering how shld i get it fixed
Thx in Advance mate.
MOD EDIT - Moved to general discussion forum
amit_dp said:
Hey dude .. how did you fix it .. my HTC HD is having the same problem .. shows the headset icon on top all the time and no sound. it thinks that the headset is plugged in. HTC HD has a 3.5mm Jack and does not supports USB headsets. so wondering how shld i get it fixed
Thx in Advance mate.
Click to expand...
Click to collapse
Not sure why I didn't get the email notifying me of your question, so I suppose it's too late. I used a tiny screwdriver to unbend the pin. Eventually it broke permanently so I had to buy a used tilt on ebay.
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry