Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Hi!
Did you try immidiately after the hard reset?
If the problem persist will be a very big problem for all! I am waiting for the Jade and I also don't want to install all the software because I need a lot of memory!
I do hope that anybode can cook soon a new rom in order to get more memory...
Let us know if you will be able to solve this problem!
Alekss_UH said:
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Click to expand...
Click to collapse
I received today my new Jade. Well, I didn't be able to stop the customization! I think that we have to wait for a new cooked rom!
Alekss_UH said:
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Click to expand...
Click to collapse
Anyone could solve this thread??
Alekss_UH said:
Hi, on Diamond, when I pressed reset buton in 3 sec interval after hard reset the customization stops. On Jade after pressing reset button customizations starts again. Anybody know, how to stop it?
Click to expand...
Click to collapse
plvigo said:
Anyone could solve this thread??
Click to expand...
Click to collapse
Not sure what the question is. To stop what customisation?
If you hardrest Jade, it will default to factory settings.
azahidi said:
Not sure what the question is. To stop what customisation?
If you hardrest Jade, it will default to factory settings.
Click to expand...
Click to collapse
After an hard reset, the system install all the software to restore the default setting (including, manila, opera, etc.). Well, in all the other device, if before 3 seconds, after a hard reset, you stop the customization, all these softwares will not be installed. So, you will gain, for example, at least 20-25 Mb in the storage memory.
Anyone have a stripped rom (without manila and opera)?
plvigo said:
After an hard reset, the system install all the software to restore the default setting (including, manila, opera, etc.). Well, in all the other device, if before 3 seconds, after a hard reset, you stop the customization, all these softwares will not be installed. So, you will gain, for example, at least 20-25 Mb in the storage memory. Anyone have a stripped rom (without manila and opera)?
Click to expand...
Click to collapse
Now, I understand, however sorry can't help you mate. I guess.. like you said
plvigo said:
I received today my new Jade. Well, I didn't be able to stop the customization! I think that we have to wait for a new cooked rom!
Click to expand...
Click to collapse
a new cooked rom would be the solution.... sorry mate can't cook.
That was usefull to avoid "vodafonization" of the touch, but it seems that doesnt work.
In my case first install system and programs from htc.
Then request for a calibration and finally appears a prompt to click for start touchFLO, then appears a message "3 seconds for vodafone customization" and then it starts.
I wan to to stop vodafone customization, but i havent be successful doing a softreset, always restart with htc installation continues with calibration and installing vodafone customization.
Related
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
nero said:
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
Click to expand...
Click to collapse
Hopefully Keys attached
Mike
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
nero said:
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
Click to expand...
Click to collapse
Yes, until now I had not noticed that but that is indeed true on mine. I have also not carried out any customisation or even reset any of these buttons (well since last HR anyway)
Mike
Hi again Mike!
Ok, I've deleted the "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" key and now the power button works perfectly.
I have wisbar advance 2 installed and probably, somehow I think, messing arround in his settings has created the power button mapping and that makes his behaviour anoying...
Maybe this is a solution for some other people with this problem. I've seen there are more people in the forum with the "power button problem".
Many thanks.
Power Button
Good news.
Had not seen others with the problem of the "power button" but if I spot them I'll link to here and by repeating power button problem hopefully searches will lead here!!!!
Mike
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
nero said:
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
Click to expand...
Click to collapse
Well now, I wonder!
Perhaps you could write up a detailed piece on exactly what was happening and then the exact detail of what you did/changed. I have a pretty good picture but if you get the time the old blow by blow account would be useful.
Cheers
Mike
going to bed now-enough problems for one day!!!
Mike,
sorry but I dont know exactly what you want to say with "old blow by blow account". My native language is not english and I dont know that expression.
I can say that my power/toggle screen button becomes "non responsive" in the past couple of days, sometimes works after 3/4 presses or after a long press but other times I need to do a sw reset pressing with the stylus in the reset button/hole.
What I did to fix this malfunction is what I've described in this thread's 5 post (here)
I've used resco's Registry Editor and deleted the key "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" and all of it's contents.
Now the power/toggle screen button works perfectly!
If you need some more information, just do has one of our tv commercial
"explains it as if I am too much donkey"
Cheers,
Nero
I'm from Portugal.. same GMT, sweet dreams
Would this make it in a wizard too?
Hi guys, I have a wizard with the power button inoperant, everything else looks work fine... I tried several tricks given in the forums and those are great to power it off but not for turning on the phone niether the display on. Would this make it in the wizard too?
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Hi Guys,
does anyone know how to reconfigure the video-call button (the little button above the green button). I don't use this one, en would like to give it another function)
Thx!
Thanks VJ
vijay555 said:
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Click to expand...
Click to collapse
Thank you Vijay I took a look to the 8125 registry and is quite different, i´m afraid this wouldn´t work for the Wizard. I´ve tried also a couple of your programas (VJKeypress and VJEscahaton) but can´t help either, my problem is to turn the phone on (i´ve been using softreset during a connection to the power supply) and all indicates that this is a hardware issue... any thoughts?
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
It died like a hero....
vijay555 said:
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
Click to expand...
Click to collapse
I follow your advice and @ 80% of flashing stalls for awhile with the progress bar in red, after some minutes proceeded turning the progress bar in blue color and @ 95% progress I got ERROR326 : INVALID COMMAND "With the legend "This NBF file can not be used for your phone. Please check your NBF file" The screen was white with the 95% progress bar and lost connection with the PC, I tried a softreset and what I got was the tricolor scren with IPL / SPL data and RUU at the top right. I´m afraid that we have another G4 casualty...
And few hours later.......
I reflashed the phone with RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4 this time it went to the 100% progress and the congratulation screen for a succesful flashing, however stalls in bootloader screen (this time without the RUU inthe top right), whenever I do a softreset (since the on / off button still is not working) The HTC innovation splash screen shows up, then disappears and my Wizard returns to the bootloader mode. I think I should be moving to the Wizard forums, thank you VJ!
hi there! I unfortunately have the issue that manila2D.exe on my jade is not starting up properly (no touchflo UI visible) since I rebooted it. Any idea how I can fix this without having to perform a hard reset? many thanks for any help!
stortoiv said:
hi there! I unfortunately have the issue that manila2D.exe on my jade is not starting up properly (no touchflo UI visible) since I rebooted it. Any idea how I can fix this without having to perform a hard reset? many thanks for any help!
Click to expand...
Click to collapse
Are you sure the Touchflo selection is selected (box checked) in the Today Home Setting.
Hi, here its another doubt...
When i call to the cell phone company to know my credit, the IVR machine answer the call. So, it says: If you need xxx press 1, if you need xxxx press 2, etc etc
The problem its that i cant do nothing during the call!! I press "keypad", "end call", "contacts" etc etc and nothing happends.
The only way to end the call its pressing the no-touchable buttom wich have a "little house"
I really want to know my credit, use the keypad to view contacts or to press 1, 2, 3 etc if i need it!!!!
Someone help me please!!!
Thank a lot!!
Maybe you could map the keypad to a button. On a side note: what ROM are you running?
Hi cmstackar!! thanks for your answer!! im running the original ROM (WM 6.1 in english)
ROM: 1.39.405.2 (47382) WWE
Radio Version: 3.43.25.19
Any idea?
Thanks again!
yemo28 said:
Hi cmstackar!! thanks for your answer!! im running the original ROM (WM 6.1 in english)
ROM: 1.39.405.2 (47382) WWE
Radio Version: 3.43.25.19
Any idea?
Thanks again!
Click to expand...
Click to collapse
Keypad option has always been available in call for me in both 6.1 and 6.5 WWE ROMs
Tony
I dont know what more can i do... Is it posible that the ROM came corrupted or somthing similar?
I m wondering what happends if i upgrade to WM 6.5...
But the cell its new, so, i dont wanna make any changes
Just a thought, does your dialer have a "curtain" that you swipe down to access the keypad button?
Hi Bruce Inman! you help me with another problem!! i hope you can help me in this too!!
Yes, there is a "curtain" but in the screen appears "slide down for more options" (like hold, add call, note, etc) and down this frase appears "keypad" (in the left) and "end call" (in the right)
Recently i turn off the phone for a wile and i CAN use the keypad (i entered to the menu of an IVR machine without any promblem) and slide down the "curtain". I end the call touching the scree in the "end the call". All was OK!!
When i end the call, the phone do not work good for 5 seconds (that happends allwas, i dont know way... after end a call, the phone do not work properly) When the phone came back to normality i try to make another phone call to use the keypad and i returned to the begining!!! I can do nothing touching the screen... no kaypad, no curtain, no end call, NOTHING!!
I hope someone knows the problem to give me a solution!!
Sorry about my english!!! i m loughting wile im writing because everyword i think: "this is no the correct word tu put right here" jajajaj. Please, try to understand me, im doing my best!!
thank you all!!
yemo28 said:
Hi Bruce Inman! you help me with another problem!! i hope you can help me in this too!!
Yes, there is a "curtain" but in the screen appears "slide down for more options" (like hold, add call, note, etc) and down this frase appears "keypad" (in the left) and "end call" (in the right)
Recently i turn off the phone for a wile and i CAN use the keypad (i entered to the menu of an IVR machine without any promblem) and slide down the "curtain". I end the call touching the scree in the "end the call". All was OK!!
When i end the call, the phone do not work good for 5 seconds (that happends allwas, i dont know way... after end a call, the phone do not work properly) When the phone came back to normality i try to make another phone call to use the keypad and i returned to the begining!!! I can do nothing touching the screen... no kaypad, no curtain, no end call, NOTHING!!
I hope someone knows the problem to give me a solution!!
Sorry about my english!!! i m loughting wile im writing because everyword i think: "this is no the correct word tu put right here" jajajaj. Please, try to understand me, im doing my best!!
thank you all!!
Click to expand...
Click to collapse
Love Google translator!
Sounds like an issue with your dialer.
A hard reset or flashing another ROM (assuming you understand how) will fix your problem.
Bruce Inman, i did 2 resets but i dont know if were a hard or soft reset. One was pressing the red buttom and the other was in "start>settings>all settings>System>clear the storage
I know that pressing the red buttom its a "soft reset" but i dont know if the other was a hard reset.
However, today im going to call the seller. If I cant change the phone for a new one, I will try to change ROM
So, the hard reset was OK? First i wanna try that!!
I hope it is resolved soon! thank you all
Hey, one question... i think that the problme is the application "phonecanvas". Can i reinstall? where can i find this program form the Diamond 2?
Thank you
yemo28 said:
Hey, one question... i think that the problme is the application "phonecanvas". Can i reinstall? where can i find this program form the Diamond 2?
Thank you
Click to expand...
Click to collapse
http://www.mediafire.com/?mtimtedtmz4
fighter7139 said:
http://www.mediafire.com/?mtimtedtmz4
Click to expand...
Click to collapse
Thanx fighter! i will try it!!
yemo28 said:
Thanx fighter! i will try it!!
Click to expand...
Click to collapse
Didn t work!
yemo28 said:
Bruce Inman, i did 2 resets but i dont know if were a hard or soft reset. One was pressing the red buttom and the other was in "start>settings>all settings>System>clear the storage
I know that pressing the red buttom its a "soft reset" but i dont know if the other was a hard reset.
However, today im going to call the seller. If I cant change the phone for a new one, I will try to change ROM
So, the hard reset was OK? First i wanna try that!!
I hope it is resolved soon! thank you all
Click to expand...
Click to collapse
Yes, the red button is a soft reset, clear storage is one way to hard reset, you can also power the device off, turn back on with power button and immediately hold both volume keys until you get the white screen, then follow the instructions.
I just finished updating the ROM (to original one), specifically this: http://www.htc.com/sea/SupportDownload.aspx?p_id=249&cat=2&dl_id=555
Before, I had this: http://img40.imageshack.us/img40/4181/screenhunter01feb201952.gif
But the problem when picking up a call with the slider bar, continuous ...
I think the issue of keypad when communicating, for ex with an IVR, improved but not much!
Someone knows what else can I do?
yemo28 said:
I just finished updating the ROM (to original one), specifically this: http://www.htc.com/sea/SupportDownload.aspx?p_id=249&cat=2&dl_id=555
Before, I had this: http://img40.imageshack.us/img40/4181/screenhunter01feb201952.gif
But the problem when picking up a call with the slider bar, continuous ...
I think the issue of keypad when communicating, for ex with an IVR, improved but not much!
Someone knows what else can I do?
Click to expand...
Click to collapse
Go to Settings\Personal\Phone and make sure Keypad is set to long tones, see if that helps. Also try short tones if not.
Recently i tired but didnt work!! im going creazy!!!
Which application or software manage the interfaz during the communications? I think that the process or application that manage the communications its the problem!!
Anybody knows another choice?
Thank you all angain and again!!
yemo28 said:
Recently i tired but didnt work!! im going creazy!!!
Which application or software manage the interfaz during the communications? I think that the process or application that manage the communications its the problem!!
Anybody knows another choice?
Thank you all angain and again!!
Click to expand...
Click to collapse
Interface is phone canvas.
Sorry I do not know what your issue is.
Its ok Bruce, i know you try to help me. This is all that matters!
I give up with this issue!! I ll try to change the phone...
Thank you all for your help!!
yemo28
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
calsi said:
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
Click to expand...
Click to collapse
Open your start menu, select "settings". On the first tab, choose "Today"
On the next screen, choose the "items" tab, and then you'll see a checkbox in the list for TouchFLO 3D, just check that, then hit "ok" to exit. When you return to the home screen, you should have TF3D back.
This is the method to turn TF3D on/off when you're doing things like installing cabs that change the look of TF3D in any way.
Touch FLO 3D Back again
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
calsi said:
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
Click to expand...
Click to collapse
Glad to help!
Yes, any time you run cabs that change the appearance at all, it's always a good idea to turn TF3D off first, just to make sure there's no issue with the cab accessing files etc that it needs to modify.
I noticed that after use the dialer (dialpad) or Activesync often hangs Back button. (Arrow)
Does not work, or suspends the most recently used functions (eg phone book).Close and return to the previous default screen is then possible only by tap the X or softreset.
After reset, the key to operate normally until a phone call or using activesync.Use the Back button several times resulted in the suspension system and its launch was made possible only by softreset.
teriero said:
I noticed that after use the dialer (dialpad) or Activesync often hangs Back button. (Arrow)
Does not work, or suspends the most recently used functions (eg phone book).Close and return to the previous default screen is then possible only by tap the X or softreset.
After reset, the key to operate normally until a phone call or using activesync.Use the Back button several times resulted in the suspension system and its launch was made possible only by softreset.
Click to expand...
Click to collapse
Which ROM do you use, some details?
Thanks for your interest!
Details: ROM v:1.28.401.4(66092)[09/16/09], Pr v:61.42t.25.31H P/N 99HJZ025-00
teriero said:
Thanks for your interest!
Details: ROM v:1.28.401.4(66092)[09/16/09], Pr v:61.42t.25.31H P/N 99HJZ025-00
Click to expand...
Click to collapse
Btw did you try a hard-reset?
Otherwise I suspect an installed app conflicting with your system or other apps...
Interestingly, I do not use any program to map the hardware keys.It is possible that one incompatible program with the HTC Mega erroneously attributes this key.
I'll hard reset and then gradually the installation of additional applications.It may prove what is the reason for this problem...
Thank you and greetings