Database Users

How to stop screen on when new sms arrives?

Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.

Third party software Pocket Zen Phone or phoneAlarm.

Ok i´ll check it and see what i can do.
Cheers mate.

User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel

@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.

What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?

@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers

User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel

Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?

If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers

@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.

I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm

Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.

As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429

phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012

Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.

deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.

bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.

I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.

Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.

anyone know if you can lock the touchscreen ?

Hi all,
when you got the screen folded over and facing out, any way of locking the screen?
thanks
ross

I was also woundering about that...

when you have the screen in phone mode, there must be some way of locking the screen!

well if nobody here knows, o2 won't know!

Not sure if this answers your question but mine is set up thus:
In 'Settings/Buttons/Lock' set 'When device is off' to 'Lock all buttons except Power Button'
I keep the screen outwards and use the power button to lock/unlock.
One snag is that the phone seems to unlock itself when receiving an incoming call. I therefore can accidently cancel it trying to get the damn thing out of my pocket.

I do believe it locks the screen during installation of the ext rom..
This is done by running tpdisable.exe from the windows directory..
A word of warning though: IT'S DISABLED!
Unless you bind tpenable.exe to a button FIRST, you're screwed..
(Ok, a soft reset should fix it..)
I think they are called tpenable and tpdisable...
I don't have the device yet, so I can't check right now.

When I was looking at the config file, there was no mention of an exe, it was like a command (unlock your ext rom and take a look at it).
I got the impression this function was now embedded in the OS hence no exe. Probably wring of course....

Then it should be possible to make such a program, and assign it to a button..

Tried this one?
http://www.freewareppc.com/utilities/screenlockforpocketpc.shtml
could maybe work for your devicetype to

Hello,
pimbo said:
Tried this one?
http://www.freewareppc.com/utilities/screenlockforpocketpc.shtml
could maybe work for your devicetype to
Click to expand...
Click to collapse
Any one work out what the key combination is to diactivate it on the Universal?
TIA

I guess it would be the equivalent keys of leftmost and rightmost keys on HTC Blue Angel ('Windows' and 'Ok' keys!?)
However you guys, should try MortSaver (freeware also)
http://www.sto-helit.de/modules/wmpdownloads/viewcat.php?cid=7
At least you can set several parameter according your preferences.
I just found an issue related with Voice Speed Dial interworking.

Hello,
Conchas said:
... However you guys, should try MortSaver (freeware also)...
Click to expand...
Click to collapse
Many thanks, I like it!

Remapping the volume slider?

Has anyone figured out how to remap the volume slider on the Wizard?
I hardly ever want to change volume, just turn on/off vibrate mode which is a single keypress anyway, but i would really like it to be an up/down control like my old Dell Axim.
I know it functions like this in IE full screen mode, but I really want it for everything (especially MS Reader).

I think a lot of people would like this. It allows a better grip on the phone whilst moving within the app you're using (eg: MS Reader).
Any guru's got an idea about this one?
Joe

Remapping
Absolutely neccessary thing to fix (volume slider)!
And as using double-language hard-keyboard layout I am in desperate need to remap the change-layout sequence.
What about remapping in this OS, is it possible to do something?

Someone did this on the Magician (found it in that group on here at the time), I remember finding it very useful!
If someone could do a Wizard version that would be great!

Solution Found
Here is how you do it (and it was on the Magician forums, thx for the tip :wink: ):
Install the program found at the URL below, or from the attachment as you wish.
When you get the setup screen, choose "Do not handle" for all except the volume slider, which is set to up/down.
Ok it, and there you go, slider is now up/down and works in MS Reader, Today screen, and general folder browsing.
It says on the site not to put it on any device not listed as compatible, which doesn't include the Wizard, but "He who dares, wins..."
I am well chuffed with it. Now I am all ready for my commute on Monday.
http://ae.inc.ru/download/AEBPlus.zip
Joe

Unless this is a new version. DO NOT USE AEB+ WITH A WIZARD
I tried AEbuttons plus awhile ago and It deleted a couple of my buttons. I dont think it is meant for a device with as many buttons as the wizard. I had to go in and manually create the buttons again. I told it to handle all buttons though. Maybe telling it to only handle the volume slider doesn't cause this problem. I won't try it again until they actually say the wizard is compatible.

I just checked all buttons having read your post.
The only casualty is the connection manager button, which now only switches from audio vol. on to vibrate ringers when held down, and I have an icon on the today screen to go there anyway.
I can live with that
BUT BEWARE: No comms manager button = no hard reset = what do you do when you need to hard reset?

guttrhead said:
Unless this is a new version. DO NOT USE AEB+ WITH A WIZARD
I tried AEbuttons plus awhile ago and It deleted a couple of my buttons. I dont think it is meant for a device with as many buttons as the wizard. I had to go in and manually create the buttons again. I told it to handle all buttons though. Maybe telling it to only handle the volume slider doesn't cause this problem. I won't try it again until they actually say the wizard is compatible.
Click to expand...
Click to collapse
How did you restore the buttons?
Never mind:
http://forum.xda-developers.com/viewtopic.php?t=33795

joebongo said:
The only casualty is the connection manager button
.....
BUT BEWARE: No comms manager button = no hard reset = what do you do when you need to hard reset?
Click to expand...
Click to collapse
I just checked if it is possible to restore the connection manager button after installing AE Button Plus, and it seems to work
Just add these registry keys after you have installed the software and you have all your buttons back and an up down slider:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C6]
"Flags"=dword:00000000
"ResetCmd"="\"\\Windows\\AppButtons\\Comm Manager.lnk\""
"Icon"="\\windows\\CommManager.exe, 0"
"Name"="Button 5"
@="\"\\Windows\\AppButtons\\Comm Manager.lnk\""
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C5]
"Flags"=dword:00000000
"ResetCmd"="\"\\Windows\\AppButtons\\Record.lnk\" -b"
"Icon"="\\windows\\HotVoice.exe, 0"
"Name"="Button 4(Hold)"
@="\"\\Windows\\AppButtons\\Record.lnk\" -b"
You can put this in a .reg file and open it on your Wizard to import into the registry
I don't think Windows minds the button to be remapped for a hard reset, the hard reset will probably still work if the button is remapped by software.

Did you figure out which reg entries are actually changed when the slider is remapped by AEB? If we can figure this out, we could create a file to do this without the need to recreate.
I am also getting slowdowns/crashed on syncing via USB, and am beginning to wonder if this is another AEB effect.
Joe

joebongo said:
Did you figure out which reg entries are actually changed when the slider is remapped by AEB? If we can figure this out, we could create a file to do this without the need to recreate.
I am also getting slowdowns/crashed on syncing via USB, and am beginning to wonder if this is another AEB effect.
Joe
Click to expand...
Click to collapse
I can't find any slider registry entries, but I have no idea where to look
I have noticed that once I close the AEB program my slider doesn't do anything anymore, so it might be possible that it is not just a registry entry

Registry help aligning Prophet screen

I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.

dkleuven said:
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
Click to expand...
Click to collapse
These values are unique to each device. If every device was the same, there would be no need for this!
From my ROM setup: 1839,1997 3118,684 3126,3328 577,3291 602,690

Thanks !
I know about the unique settings, but with your prophet settings I can try to come closer thn woth settings fora completely different device, and maybe tweak a bit more myself through remot registry editor.
Thanks again!

HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
1942,1963 3228,622 3197,3268 664,3267 675,653
Device G3
Rui

pls help me.... pls
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?

jhonnyyy said:
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
Click to expand...
Click to collapse
You need a registry editor. If you just want to realign the screen, hold the windows hardware button and then press the centre d-pad button.

salll
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???

jhonnyyy said:
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
Click to expand...
Click to collapse
Maybe a hardware issue...
Try using a registry editor (I'd use this) to edit the settings using those above... May not be perfect but may help....

Touch Screen Answer Button doesn't work

Has anyone encountered this problem??
On an incoming call, I attempt to press "ANSWER" on the touch screen and nothing happens. Pressing "IGNORE" seems to work.
I have the following installed:
- Gyrator 2
- Diamond Tweak 0.5.3
- TF3D Configuration 0.6.7
- AppToDate
Could any of these be creating some form of conflict? I know I should probably delete one by one, but was wondering if anyone else has heard of this.
Thanks
Lee

Chek in: \windows\startup
What do you have?

Sergio PC said:
Chek in: \windows\startup
What do you have?
Click to expand...
Click to collapse
I have the following in Windows\Startup\....
- GAlarm Reload
- Personalizer
- poutlook
- Services
- Voice Command
Also, it seems to be an intermittent problem, which makes it even more frustrating!!

Nooo all good there I was wondering if you had a keydisabler, but you dont.
When things go sour on you phone you should preform a hard reset that solves all problems.
Greets.

I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!

wolf peterson said:
I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!
Click to expand...
Click to collapse
Could you please tell me where in the registry you made those changes so I could check the values. Also, let me know what values you have listed so I can compare.
Thanks