Has anyone encountered this problem??
On an incoming call, I attempt to press "ANSWER" on the touch screen and nothing happens. Pressing "IGNORE" seems to work.
I have the following installed:
- Gyrator 2
- Diamond Tweak 0.5.3
- TF3D Configuration 0.6.7
- AppToDate
Could any of these be creating some form of conflict? I know I should probably delete one by one, but was wondering if anyone else has heard of this.
Thanks
Lee
Chek in: \windows\startup
What do you have?
Sergio PC said:
Chek in: \windows\startup
What do you have?
Click to expand...
Click to collapse
I have the following in Windows\Startup\....
- GAlarm Reload
- Personalizer
- poutlook
- Services
- Voice Command
Also, it seems to be an intermittent problem, which makes it even more frustrating!!
Nooo all good there I was wondering if you had a keydisabler, but you dont.
When things go sour on you phone you should preform a hard reset that solves all problems.
Greets.
I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!
wolf peterson said:
I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!
Click to expand...
Click to collapse
Could you please tell me where in the registry you made those changes so I could check the values. Also, let me know what values you have listed so I can compare.
Thanks
Related
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
nero said:
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
Click to expand...
Click to collapse
Hopefully Keys attached
Mike
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
nero said:
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
Click to expand...
Click to collapse
Yes, until now I had not noticed that but that is indeed true on mine. I have also not carried out any customisation or even reset any of these buttons (well since last HR anyway)
Mike
Hi again Mike!
Ok, I've deleted the "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" key and now the power button works perfectly.
I have wisbar advance 2 installed and probably, somehow I think, messing arround in his settings has created the power button mapping and that makes his behaviour anoying...
Maybe this is a solution for some other people with this problem. I've seen there are more people in the forum with the "power button problem".
Many thanks.
Power Button
Good news.
Had not seen others with the problem of the "power button" but if I spot them I'll link to here and by repeating power button problem hopefully searches will lead here!!!!
Mike
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
nero said:
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
Click to expand...
Click to collapse
Well now, I wonder!
Perhaps you could write up a detailed piece on exactly what was happening and then the exact detail of what you did/changed. I have a pretty good picture but if you get the time the old blow by blow account would be useful.
Cheers
Mike
going to bed now-enough problems for one day!!!
Mike,
sorry but I dont know exactly what you want to say with "old blow by blow account". My native language is not english and I dont know that expression.
I can say that my power/toggle screen button becomes "non responsive" in the past couple of days, sometimes works after 3/4 presses or after a long press but other times I need to do a sw reset pressing with the stylus in the reset button/hole.
What I did to fix this malfunction is what I've described in this thread's 5 post (here)
I've used resco's Registry Editor and deleted the key "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" and all of it's contents.
Now the power/toggle screen button works perfectly!
If you need some more information, just do has one of our tv commercial
"explains it as if I am too much donkey"
Cheers,
Nero
I'm from Portugal.. same GMT, sweet dreams
Would this make it in a wizard too?
Hi guys, I have a wizard with the power button inoperant, everything else looks work fine... I tried several tricks given in the forums and those are great to power it off but not for turning on the phone niether the display on. Would this make it in the wizard too?
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Hi Guys,
does anyone know how to reconfigure the video-call button (the little button above the green button). I don't use this one, en would like to give it another function)
Thx!
Thanks VJ
vijay555 said:
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Click to expand...
Click to collapse
Thank you Vijay I took a look to the 8125 registry and is quite different, i´m afraid this wouldn´t work for the Wizard. I´ve tried also a couple of your programas (VJKeypress and VJEscahaton) but can´t help either, my problem is to turn the phone on (i´ve been using softreset during a connection to the power supply) and all indicates that this is a hardware issue... any thoughts?
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
It died like a hero....
vijay555 said:
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
Click to expand...
Click to collapse
I follow your advice and @ 80% of flashing stalls for awhile with the progress bar in red, after some minutes proceeded turning the progress bar in blue color and @ 95% progress I got ERROR326 : INVALID COMMAND "With the legend "This NBF file can not be used for your phone. Please check your NBF file" The screen was white with the 95% progress bar and lost connection with the PC, I tried a softreset and what I got was the tricolor scren with IPL / SPL data and RUU at the top right. I´m afraid that we have another G4 casualty...
And few hours later.......
I reflashed the phone with RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4 this time it went to the 100% progress and the congratulation screen for a succesful flashing, however stalls in bootloader screen (this time without the RUU inthe top right), whenever I do a softreset (since the on / off button still is not working) The HTC innovation splash screen shows up, then disappears and my Wizard returns to the bootloader mode. I think I should be moving to the Wizard forums, thank you VJ!
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
dkleuven said:
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
Click to expand...
Click to collapse
These values are unique to each device. If every device was the same, there would be no need for this!
From my ROM setup: 1839,1997 3118,684 3126,3328 577,3291 602,690
Thanks !
I know about the unique settings, but with your prophet settings I can try to come closer thn woth settings fora completely different device, and maybe tweak a bit more myself through remot registry editor.
Thanks again!
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
1942,1963 3228,622 3197,3268 664,3267 675,653
Device G3
Rui
pls help me.... pls
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
jhonnyyy said:
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
Click to expand...
Click to collapse
You need a registry editor. If you just want to realign the screen, hold the windows hardware button and then press the centre d-pad button.
salll
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
jhonnyyy said:
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
Click to expand...
Click to collapse
Maybe a hardware issue...
Try using a registry editor (I'd use this) to edit the settings using those above... May not be perfect but may help....
there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)
Hello,
My touche screen is not working on my Samsung i900. I did try to do a "align Screen". This align screen procedure goes well. I can press the + and the pda is accepting the result.
The problem is that when this is done the screen is still not working. I can press any place on the screen and there is no reaction.
On the forum I have seen that there are recommendations to set the following values in the registery entry "calibrationData" --> 519,503 177,881 182,129 847,127 849,872
If I set these values the screen is still not working!
I did also check values I had after doing the "align screen" procedure and then the data save in the registry is the following: 517,2 159,-3 170,7 853,8 832,-4
As you can see the recommended data is completely different than what I get and I wondering if this is normal?
Recommended calibrationData:
519,503 177,881 182,129 847,127 849,872
My calibrationData:
517,2 159,-3 170,7 853,8 832,-4
Does anyone of you know how could I solve this problem?
Thanks in advance.
philipina said:
Hello,
My touche screen is not working on my Samsung i900. I did try to do a "align Screen". This align screen procedure goes well. I can press the + and the pda is accepting the result.
The problem is that when this is done the screen is still not working. I can press any place on the screen and there is no reaction.
On the forum I have seen that there are recommendations to set the following values in the registery entry "calibrationData" --> 519,503 177,881 182,129 847,127 849,872
If I set these values the screen is still not working!
I did also check values I had after doing the "align screen" procedure and then the data save in the registry is the following: 517,2 159,-3 170,7 853,8 832,-4
As you can see the recommended data is completely different than what I get and I wondering if this is normal?
Recommended calibrationData:
519,503 177,881 182,129 847,127 849,872
My calibrationData:
517,2 159,-3 170,7 853,8 832,-4
Does anyone of you know how could I solve this problem?
Thanks in advance.
Click to expand...
Click to collapse
nope, it's not normal at all.... at first sight it looks like a damaged touchscreen, it's like something is constantly pressing it somewhere in the very upper part.
Something similar happened once to a collegue of mine at office with her son's nintendo ds: solved replacing the touchscreen with a new one...
Thank you for your answer.
Yes, this is also what I start thinking of.
Yesterday I bought a new touch screen on ebay. I will keep you informed about the result.
To be able to continue using my Samsung, I would like to activate the mouse pointer and use it with the central button?
Do you know how can I do that whithout using the touch screen?
Thanks in advance.
Alain,
philipina said:
Thank you for your answer.
Yes, this is also what I start thinking of.
Yesterday I bought a new touch screen on ebay. I will keep you informed about the result.
To be able to continue using my Samsung, I would like to activate the mouse pointer and use it with the central button?
Do you know how can I do that whithout using the touch screen?
Thanks in advance.
Alain,
Click to expand...
Click to collapse
I don't remember if it can be enabled via registry, but you could try taking a look in
hklm/system/state/samsung/mouse
and see if there's something to enable it... would like to be more precise about it, but without an i900 in my hands I can't check the exact registry entry
hi, does anyone here already had a problem like mine?
Last weekend I installed on my treo the Wisbar Advanced Desktop 4, and I don´t know wtf happens, but my joypad inverted some buttons, like it was in landscape mode.
I unistalled the software, but the problems are still on the phone. When I click "right" it goes to "down". When I clik "down"m it goes to "left". Left goes up and up goes right. And I have no ideia what to do.
In time: here is a tip that have no links to my problems. In "today", if you click and hold on clock that appears on top (at left of task manager), you can change it to "analog" or "digital".
Thanks for attention!
remember to search
found this on another thread, well... two different ones. search is key and thanks for the tip, i forgot about that...
obsomo said:
Change registry entry HKLM/system/GDI/Rotation/Angle from whatever it is (in my case 270) to 0
Worked for me.
Click to expand...
Click to collapse