Related
I have tried using both MobiDial and PhonePlus. I had no problems with either of them for a long time. Now, for no apparent reason, they can no longer map the green send key reliably. When I press it, the default phone application launches. If I run either application manually (Start/Programs/etc...) or if I map them to another button (like Record), they work. They show that the send key is mapped to their application, but pressing it still launches the default dialer. Everything was working yesterday. PhonePlus is installed and it launched when I press the green send key. Today it won't launch PhonePlus. I have not even installed anything new!
I realize that mapping the send button is different. Both of those packages have memory-resident code to launch their software. I have used MemMaid to verify that the software is running. I have even tried changing the load order to see if something else is interfering but that hasn't helped.
I am not running any button mapping software. I have tried edSub's 1.72 ROM and the release version of 1.72.187.
Once the mapping is lost, even cold-booting and restoring from a backup when it did work will not restore the mapping. There were several files the backup could not overwrite, though.
Can someone help me, please? I don't want to use the default dialer!!!
Thanks,
Corey
Hi CoreyMck,
Slow post huh?
Well, I have the same problem and it's very frustrating... :evil:
I noticed that by re-mapping the key to something else and then mapping the green key again but not soft-reseting will work for some brief time, then it stops again...
Now this procedure does not work anymore!!!
Any clues anyone?
Update
I think I have tracked my problem down. It seems it was a conflict with SBSH Pocket Breeze. I uninstalled it and reinstalled PhonePlus! So far the button has stayed mapped.
Well, I think I even narrowed down the problem.
No need to uninstall the BREEZE in order to work those software together.
This is what I have recieved from the phoneplus developers when I have explained them my problem:
Dear Sir,
You probably have PocketBreeze installed.
Try to disable the D-Pad scrolling feature in the PocketBreeze settings and do a soft reset.
Regards,
Support Team
ME Software
www.mesoftware.biz
[email protected]
Click to expand...
Click to collapse
I have done what they suggested, and it worked !
Nice job.
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
nero said:
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
Click to expand...
Click to collapse
Hopefully Keys attached
Mike
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
nero said:
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
Click to expand...
Click to collapse
Yes, until now I had not noticed that but that is indeed true on mine. I have also not carried out any customisation or even reset any of these buttons (well since last HR anyway)
Mike
Hi again Mike!
Ok, I've deleted the "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" key and now the power button works perfectly.
I have wisbar advance 2 installed and probably, somehow I think, messing arround in his settings has created the power button mapping and that makes his behaviour anoying...
Maybe this is a solution for some other people with this problem. I've seen there are more people in the forum with the "power button problem".
Many thanks.
Power Button
Good news.
Had not seen others with the problem of the "power button" but if I spot them I'll link to here and by repeating power button problem hopefully searches will lead here!!!!
Mike
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
nero said:
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
Click to expand...
Click to collapse
Well now, I wonder!
Perhaps you could write up a detailed piece on exactly what was happening and then the exact detail of what you did/changed. I have a pretty good picture but if you get the time the old blow by blow account would be useful.
Cheers
Mike
going to bed now-enough problems for one day!!!
Mike,
sorry but I dont know exactly what you want to say with "old blow by blow account". My native language is not english and I dont know that expression.
I can say that my power/toggle screen button becomes "non responsive" in the past couple of days, sometimes works after 3/4 presses or after a long press but other times I need to do a sw reset pressing with the stylus in the reset button/hole.
What I did to fix this malfunction is what I've described in this thread's 5 post (here)
I've used resco's Registry Editor and deleted the key "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" and all of it's contents.
Now the power/toggle screen button works perfectly!
If you need some more information, just do has one of our tv commercial
"explains it as if I am too much donkey"
Cheers,
Nero
I'm from Portugal.. same GMT, sweet dreams
Would this make it in a wizard too?
Hi guys, I have a wizard with the power button inoperant, everything else looks work fine... I tried several tricks given in the forums and those are great to power it off but not for turning on the phone niether the display on. Would this make it in the wizard too?
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Hi Guys,
does anyone know how to reconfigure the video-call button (the little button above the green button). I don't use this one, en would like to give it another function)
Thx!
Thanks VJ
vijay555 said:
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Click to expand...
Click to collapse
Thank you Vijay I took a look to the 8125 registry and is quite different, i´m afraid this wouldn´t work for the Wizard. I´ve tried also a couple of your programas (VJKeypress and VJEscahaton) but can´t help either, my problem is to turn the phone on (i´ve been using softreset during a connection to the power supply) and all indicates that this is a hardware issue... any thoughts?
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
It died like a hero....
vijay555 said:
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
Click to expand...
Click to collapse
I follow your advice and @ 80% of flashing stalls for awhile with the progress bar in red, after some minutes proceeded turning the progress bar in blue color and @ 95% progress I got ERROR326 : INVALID COMMAND "With the legend "This NBF file can not be used for your phone. Please check your NBF file" The screen was white with the 95% progress bar and lost connection with the PC, I tried a softreset and what I got was the tricolor scren with IPL / SPL data and RUU at the top right. I´m afraid that we have another G4 casualty...
And few hours later.......
I reflashed the phone with RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4 this time it went to the 100% progress and the congratulation screen for a succesful flashing, however stalls in bootloader screen (this time without the RUU inthe top right), whenever I do a softreset (since the on / off button still is not working) The HTC innovation splash screen shows up, then disappears and my Wizard returns to the bootloader mode. I think I should be moving to the Wizard forums, thank you VJ!
Hi,
I would like to disable the footprint-application from the right hardware-button, but it dosn't work. In registry under HKLM/Software/Microsoft/shell/keys I've made two new entries (40C1 and 40C2), so I can choose now the two hardware-buttons in preferences. But when I lay another program to the right hardware-button, this programm starts together with footprint...
The left hardware-button is no problem, it works fine with every programm I want
Thanks
oese
(sorry for my bad english, I hope you can understand my problem...)
Looks like it is somehow hardcoded into the TouchFLO interface. I managed to "unmap" the left key (simply by uninstalling TomTom), but I had no success with the Footprints key so far.
I think that some program or registry setting is responsible for these keys mapping.
I've managed with ae button plus to assing a different application to these keys, but the default apps run again with the new apps. And I think that because you uninstalled tomtom, just they didn't find the app and for this is not running with the new assinged app.
I don't think that is touchflo related.
dancer_69 said:
I think that some program or registry setting is responsible for these keys mapping.
Click to expand...
Click to collapse
I am not sure mate, tried to look almost everywhere in the registry with no success. But I'll keep trying, the Navi and Footprints buttons sux. I'd rather have Diamond's/HD's Back and Home keys, if nothing better.
dancer_69 said:
I've managed with ae button plus to assing a different application to these keys, but the default apps run again with the new apps.
Click to expand...
Click to collapse
Got the same result too, when tried to map another app with AEBP.
dancer_69 said:
And I think that because you uninstalled tomtom, just they didn't find the app and for this is not running with the new assinged app. I don't think that is touchflo related.
Click to expand...
Click to collapse
Sure, I know it just doesn't find the app, but at least it got me rid of TomTom (I am an iGO 8 user). I admit it's quite lousy workaround.
I think I found something.
Seems that the function of these buttons loading as a service.
I've managed to unbind the left button by stop the NaviService(NPS0 and I think that
the service App Service(APP1 is responsible for the right button, but I cannot stop this service.Needed further research though.
EDIT:
I've managed to disable it from registry(HKLM\Services\App). I changed Context and Index values to 0 and seems that the button is unbind now!
Needed to set these services to not automatic start also. This can be done with FdcSoft Task Manager 3.1
Ok, after some time playing around with my registry, I found a workaround how you can start a different program with the footprint button:
(BTW I have a German version so I'm not sure how the features are called in English, so if anyone can describe what I write next clearer, please feel free. Thx)
First you have to go to system preferences. In the system tab you'll find an option where you can make some adjustments about A-GPS and Place Settings. In the left tab you can activate and deactive A-GPS and tell your device which provider to use to access it. In the right tab you can tell the device not to notify you if some HTC software wants to start this feature which monitors the place where you are. Check this box.
This will keep the Google notifier to pop up every time you press the footprint button.
The go to the registry:
\HKLM\Software\HTC\FootCam
and simply change the path in there to any program you want to use with the button. e.g. \Program Files\ThumApps\ThumbCal\Thumbcal.exe
Well, works well, but do you have any idea if disabling these services does not cause any other issues?
After a hard reset I did the following
- installed the 40C1 and 40C2 reg key
- set the the NaviService(NPS0) to manual
Both buttons can now be used by Windows without any issue so far. No more changes were needed for me. Hope that helps. (I have a HTC Guide, that is the O2 branded version)
Sebastian
I mentioned that few posts above.
The problem is that when the NaviService doesn't run, NaviPanel doesn't start automatic when in carkit mode, even if this option is checked in carkit settings screen.
kuerbis said:
- set the the NaviService(NPS0) to manual
Click to expand...
Click to collapse
Hi,
where I can find this setting?
oese
dancer_69 said:
I think I found something.
Seems that the function of these buttons loading as a service.
I've managed to unbind the left button by stop the NaviService(NPS0 and I think that
the service App Service(APP1 is responsible for the right button, but I cannot stop this service.Needed further research though.
EDIT:
I've managed to disable it from registry(HKLM\Services\App). I changed Context and Index values to 0 and seems that the button is unbind now!
Needed to set these services to not automatic start also. This can be done with FdcSoft Task Manager 3.1
Click to expand...
Click to collapse
...................................
sorry for my stupid question
it works for my iolite...
THANKSALOT
Left Key
HKey_LOCAL_MACHINE\Services\NaviService
Turn «Flags» from 0 to 1
For me it works
U can read this (its in german), include a reg-file to dissolve this and a navipanel.lnk for start menu
Greetings Mirko
angeja said:
HKey_LOCAL_MACHINE\Services\NaviService
Turn «Flags» from 0 to 1
For me it works
Click to expand...
Click to collapse
that thing disable my both buttons for some reason. and copilot and footprnts!! well it looks that it works for me atm.
You can use AE Button Plus, you can assign 4 different actions to each button.
Dontatos said:
that thing disable my both buttons for some reason. and copilot and footprnts!! well it looks that it works for me atm.
Click to expand...
Click to collapse
Before read THIS
Then use "Start" - "Settings" - "Hardware-Buttons" to change assignment.
Greetings Mirko
Yes It Works,
Followed the steps and it works. I assigned foot prints to put phone in standby ( screen off / on ) The Off works quick, the On has a delay but I will get used to it.
Set the NAVI to Manual Start is the trick
I installed PhonEx right after I got my HD2 but realized that I like the clean design of the WM phone. So, I uninstalled PhonEx and got my WM phone but realized that the touchscreen keys, e.g. Keypad, End Call, etc., are locked and are not functioning. The only way for me to end the call is by pressing the red end hardkey.
Does somebody know what can be the problem? Btw, I have S2U2 also installed.
This is a similar problem when the tap time is enabled in the BsBTweaks program. I don't know the exact reg key name, but you can download the BsBTweaks, enable the tap time, close, reboot, then disable it again. I think that will work or..
I think it's this registry key - HKLM\System\GWE\Touch\Filter - I have 0 for minimumtaptime. try to change it and see if it works.
gnash.s said:
This is a similar problem when the tap time is enabled in the BsBTweaks program. I don't know the exact reg key name, but you can download the BsBTweaks, enable the tap time, close, reboot, then disable it again. I think that will work or..
I think it's this registry key - HKLM\System\GWE\Touch\Filter - I have 0 for minimumtaptime. try to change it and see if it works.
Click to expand...
Click to collapse
wow, it works! that was a quick fix. thanks to you! now i'm a happy camper. but for sure with all the tweaking that i'll be doing, i'll be messing up once again and will have some more problems. that's the beauty of having a winmo phone!